tetra pa 250 used for sale

Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-320

Chuck for self-centering lathe 3 + 3 jaws 250 mm, 1600 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 320 x 320 x 210 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-103

4 UNITS/SETS OF SDM0071 PACKED TOGETHER. A SINGLE SDM0071 CORRESPONDS TO: Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0071 PACKED TOGETHER: 920 x 680 x h45 mm - 12 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-285

Extra options : All-round lighting , blue spot , full cab , daytime running lights , spoon positioner , heating Auction-ID: A1-43890-69

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-43890-40

Extra options: Recently built type, All-round LED lighting, cabin, Engine runs beautifully, Daytime running lights, Blue spot, Heating, Air conditioning, 3-5 functions, Flashing light, incl gas tank, joy stick Auction-ID: A1-43890-3

Extra options : Fully closed cab , LED lighting all around , Blue spot , fingertip control , beacon Auction-ID: A1-43890-6

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-43890-9

Extra options: LED lighting front and rear, Blue spot, Spoon adjuster, electric handbrake, Auction-ID: A1-43890-5

Technical Specifications Approximate weight: 145 Kg Accessories: Tailstock Notes: Maximum load allowed with tailstock 250 Kg; Maximum load allowed horizontally 250 Kg; Maximum load allowed vertically 125 Kg Item sold in unverified status Auction-ID: A1-44614-13

SKF - Batch of refurbished bearings Auction-ID: A1-46070-246

Auction-ID: A1-46315-38

Dimensions LxWxH: 1050 x 550 x 1050 mm Auction-ID: A7-45992-118

Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-616

\" 3-point internal measuring screw Measuring range: 225–250 mm Version: analogue Manufacturer: not clearly marked Accessories: Adjustment ring Ø 250 mm (marking \"250 C\"), original case, instructions, adjustment tool (screwdriver) 3-point internal measuring screw for the measuring range 225–250 mm including matching adjustment ring Ø 250 mm. The measuring device is located in the original case with foam insert. An operating manual for three-point internal measuring screws (analogue/digital) is included. Condition: Used. Visually good condition with slight signs of wear. Calibration sticker available, but no current calibration documented. Functional test not carried out. • 3-point internal measuring screw 225–250 mm • Adjustment ring Ø 250 mm • Original case • Instructions \" Auction-ID: A7-46417-121

\" 3-point internal measuring device / three-point internal measuring screw Manufacturer: Hogetex Measuring range: 250–275 mm (marking on the measuring device) Accessories: Setting ring Ø 237.503 mm, original wooden boxes, dimensional test documents Hogetex 3-point internal measuring device for the measuring range 250–275 mm. The set includes the matching adjustment ring Ø 237.503 mm. Gauge and adjustment ring are each supplied in the original wooden box. There is a dimensional check for the adjustment ring: nominal dimension 237.503 mm, actual dimension 237.505 mm (document available). Test sticker available on the adjustment ring. Condition: Used. Gauge and adjustment ring in good, well-maintained condition with slight signs of use. wooden boxes clearly used. No current, traceable calibration. Scope of delivery: • Hogetex 3-point internal measuring device, range 250–275 mm ...

\" Electric chain hoist 125 / 250 kg Manufacturer / Model: LIFTKET – Hoffmann Fördertechnik GmbH Wurzen Type: KLORW 63GV8-2 Condition: Used, functional Electric chain hoist LIFTKET from German production. The chain hoist is equipped with a control bottle and has fine travel. The sale is without a crane system, only the chain hoist is offered. • Load capacity: 125 / 250 kg • Hook height: approx. 2.65 m • Manufacturer: Hoffmann Fördertechnik GmbH Wurzen (LIFTKET) • Type: KLORW 63GV8-2 • Year of construction: 2010 • Power connection: 400 V / 3 phases • Control: pendant switch • Lifting speed: with fine stroke \" Auction-ID: A7-46417-377

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-617

\" Face lathe WEMA Zerbst DP2 – Ø 1,250 mm – 2 supports – with 3-jaw chuck Face lathe WEMA Zerbst, type DP2, in heavy industrial design. The machine is equipped with a face plate Ø 1,250 mm and has 2 supports, which also allows parallel machining. A 3-jaw chuck is installed, and interchangeable jaws are also available. Condition: • Used • Ready to demonstrate • Age-related signs of wear Scope of delivery: • Machine complete • Control cabinet • Circuit diagrams • Interchangeable jaws • Manufacturer: WEMA Zerbst • Type: DP2 • Year of construction: 1980 • Face plate: Ø 1,250 mm • Voltage: 380 V • Control: conventional • Feed + rapid traverse available • Documentation: Electrical circuit diagrams available • 2 supports • 3-jaw chuck mounted • Interchangeable jaws • Heavy face disc plate • 2 control panels / control areas • Control cabine ...

- Producer Cefla - Type TN 2250 - Length 2.250 mm - Belt with 1.360 mm - Overall width 1.600 mm - Year of construction 2008 - FU-Regelung für Feed speed - Feed speed ~ 2 - 8 m/min - frequency converter on site - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Commodity code 8428330 - Weight 270 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

According to photos, weight estimated Auction-ID: A1-45666-9

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-530

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-531

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-59

GMC C2500 High Sierra 25 – Built in 1975 • Model: GMC C2500 High Sierra 25 • Registration date: 31.12.1975 • Engine: 7.4 liter V8 big block gasoline • Standard power: 180 kW / 245 hp • Power output after conversion: 257 kW / approx. 350 hp • Automatic transmission • Rear-wheel drive • H license plate (classic car registration) • Vehicle Type: Truck Open Box • High Sierra Amenities • Engine, drive & electrics overhauled (2022) • Stainless steel exhaust system • Tyres: 33×12.5 R16.5 LT • Towing capacity: approx. 2,700 kg • Distinctive US pickup of the C/K series (3/4-ton) • Classic American V8 sound • Collector's vehicle with value appreciation potential Auction-ID: 048-XF3-5

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-3

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-529

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-21

Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46460-428

Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New Auction-ID: A7-46460-421

Internal number: 47023, Drive type: Diesel, Overall dimensions without tines (LxWxH): 3.7 m x 1.8 m x 1.9 m, Maximum lifting height: 5.6 m, Load at maximum height: 2,000 kg, Maximum forward reach: 3.3 m, Load at maximum reach: 800 kg, Operating weight without attachments: 5,010 kg, Fully glazed all-weather cab with adjustable seat Auction-ID: A1-46342-2

Disc diameter 350mm Speed 1400rpm Power: 1.8KW see pictures Auction-ID: A7-46460-558

Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5) Auction-ID: A7-46460-542

Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-566

Rock-solid band saw - Double mitre cuts up to 60° on the right, up to 45° on the left - AutoCut - Vise with quick-release device - Belt tension control - Electr. Automatic cooling - Material stop max 600mm Cutting diameter 250 mm Saw blade length 3150 x 27 x 0.9 mm Table height 750 mm Cutting width 170 x 310 mm Cutting speed 25 - 90 m/min Cutting capacity at 60° around 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 45° Round 205 mm Cutting capacity at 45° square 205 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions L x W x H 0.95 x 1.16 x 1.98 m Condition: never used / new (5) Auction-ID: A7-46460-533

CE-ESTER approval until 09-2026 Auction-ID: A1-41995-153

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-365

Slide size 1600x1200 mm Slide stroke 800 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1200 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-14

Slide size 1850x1200 mm Slide stroke 460 mm Shots per minute 15-30 Opening between the uprights 1900 x1000 mm Worktop size 1850x1200 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-12

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Please note, the package may contain pinholes. Auction-ID: A1-43752-16

KVH as good as new 80 x 120 x 2500mm 120 x 120 x 1700mm Auction-ID: A1-46501-2644

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-364

Around 6cm, 250cm long, unused Comes as a package Auction-ID: A1-40418-451

UV lamp for curing UV reactive adhesives Please note, the UVA filter and the protective grille are no longer available For operation, this must be procured as a spare part. UV bulb works. In wooden transport packaging Original price of the unit approx. 1800.00 EUR - spare parts maximum 200 EUR Auction-ID: A1-46501-2152

last inspection until 09-2025 Auction-ID: A1-41995-151

Factory number: 3073; Bending length: 2500mm, Sheet thickness max.: 5mm Auction-ID: A7-46619-255

Extra options : Fully closed cab , LED lighting all around , Blue spot , fingertip control , beacon Auction-ID: A1-40377-15