tetra pa 250 used for sale

Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Slim cartons. Controls: 100V. Electrical diagram: 648022-1001. Production hours: 88.436 hours. Including P-T-8 RECAP 2, year: 1996, 38.359 hours. The machine has been running in in a milk factory / dairy in Europe. Line dismantled in KW 22 - 2026 and is now located in the warehouse of Hamburg Machinery in Germany., Type of Machine: Aseptic carton filler, Capacity (Units): 6.000 cartons per hour, Packaging: 1.000 ml Slim, Product: Milk, Controls: 100 V, Conveyors: No, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 88.436 h, Electric: 400/230 Volt - 50 Hz

Description Item # 9312 - HOMOGENISER Manufactured by TETRA PAK Model Tetra Alex 20 Year 2001 Standard 2-Stage Machine 30kW Motor Single Speed Originally designed to run at 160bar up to around 5000litres per hour

Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Slim cartons. Controls: 100V. Electrical diagram: 648022-1001. Production hours: 28.887 hours. Including ± 5 meter of outfeed conveyor. The machine has been running in in a milk factory / dairy in Europe. Machine still located in the factory., Type of Machine: Aseptic carton filler, Capacity (Units): 6.000 cartons per hour, Packaging: 1.000 ml Slim, Product: Milk, Controls: 100 V, Conveyors: Yes, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 28.887 h, Electric: 400/230 Volt - 50 Hz

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

The Tetra Pak TA 20 homogeniser is a type of machinery used in the food and beverage industry, primarily for the homogenization process of liquid products. Homogenization is a mechanical process that breaks down fat globules in liquid products to create a uniform and stable emulsion. This process is crucial in the production of products like milk, cream, and fruit juices, improving their texture, stability, and mouthfeel., Key Features of the Tetra Pak TA 20 Homogeniser:, - Design and Capacity: The TA 20 is designed for medium-scale production, capable of handling various flow rates depending on the application. It typically supports a wide range of products., - Versatility: This homogeniser can be used for a variety of dairy and non-dairy applications, including milk, cream, yogurt, beverages, and sauces., - High Efficiency: It offers efficient homogenization with adjustable pressure se ...

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

USED TETRA PAK REX TR27 ASEPTIC FILLING AND CAPPING COMPLETE LINE FOR SALE YEAR 2016 Item #: Usm-245 Category Tetra Pak Rex USED TETRA REX TR/27 Complete Filling and Capping Line For Sale 500ml and 1000ml: 1-USED TETRA PAK ASEPTIC REX TR/27 Complete Filling and Capping Line For Sale YEAR OF MANUFACTURING 2016, Filling Size: 500ml and 1000ml PACK SHAPE ; GABLE TOP or Tetra Rex SPEED: 7000 PACKS PER HOUR ASEPTIC FILLING FOR LONG LIFE PRODUCTS 2-Tetra Pak Tray Machine, Cardboard Packer 32 by Tetra Pak, Wrap Around, Formats: 23, 43, YEAR OF MANUFACTURING 2016 3-Conveyors: Type: Conveyor Control System and Easy Ride and Long Conveyors Condition: Excellent and Tetra Pak Maintained

USED A3 SPEED 1000ML SQUARE FILLING LINE FOR SALE YEAR 2020 Item #: Usm-246 Category Tetra Pak A3 Speed USED A3 SPEED 1000ML SQUARE FILLING LINE FOR SALE YEAR 2020 Tetra Pak A3 Speed Filler, Automatic UHT Carton Filling Machine, Year 2020 ITW Hartness Accumulator, Type ACH30-0800-104M, Stack Type Accumulator - multi spiral high, with drive and control system and integrated with the central line control facility, Year 2020 Tetra Pak CAP30-400 Speed Cap Applicator, Automatic Spout and Cap Applicator , Year 2020 Bonino, Cap Elevator/Unscrambler - with hopper bin, elevator and unscrambling unit. Meurer Tray Packer, Type CM/HTW456, Automatic Carton Erector/Packer - with enclosure, throughfeed and discharge conveying, collating, Nordson Pro Blue 10 hot melt unit Meccanica, Type 015-119-001, Hydraulic Reel Trolley - 135kg capacity, manually operated. Conveyors CONDITION: Excell ...

USED TETRA PAK TBA 19 200ML SLIM 10V FILLING LINE FOR SALE Item #: Usm-247 Category Tetra Pak TBA 19 1-Tetra Pak TBA 19 200ml Slim Filling Machine, Year of manufacturing 2003 and version 10 and with ASU- Auto splice unit, Working Hours 40183 2-Tetra Pak Straw applicator is tsa 21, Year of manufacturing 2003, Version 200v 3-Tetra Pak Multi Shrink 65, Year of manufacturing 2003 5-Packer CSB-10 6-Conveyors and Paper trolly Condition: Tetra Pak maintained and good condition line.

USED TETRA PAK TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 2007 Item #: Usm-248 Category Tetra Pak TBA 19 1-TBA 19 125ml Slim Filling Machine, Year of manufacturing 2007, Version 20v, with ASU Auto Splice unit, speed 7500 Packs per hour , Working Hours 42000 2-Tetra Straw applicator TSA 21, Year of manufacturing 2004, Version 200v 3-Tetra Multi Shrink Wrap 65, Year of manufacturing 2004 4-Packer CSB 1D 5-Conveyors and Paper trolly Condition: Tetra Pak maintained and excellent workinh condition

USED TETRA PAK A1 TWA 180ML ULTRA WEDGE FILLING LINE FOR SALE YEAR 2019 Item #: Usm-250 Category Tetra Pak A1 A1 TWA 180ml Ultra wedge filling line, year of manufacturing 2019, version 1000v, speed 10000 packs per hour. with straw applicator ,Packer, conveyors and paper trolly.

TETRA PAK TR28 REX FILLING LINE FOR SALE YEAR 2021 Item #: Usm-257 Category Tetra Pak Rex Tetra Pak Filling Line – TR/28 General Information Manufacturer: Tetra Pak Machine Type: TR/28 carton filling machine Year of Manufacture: 2021 Country of Assembly: Sweden Performance & Capacity Configuration: Dual-lane filler Output per lane: approx. 7,000 packs/hour Total output: approx. 14,000 packs/hour Filling formats: 500 ml cartons 1,000 ml cartons Operating & Technical Data Operating hours (last service reference): approx. 5,455 hours Preventive maintenance completed (latest service): full service including 166 maintenance tasks System includes: Filling system Sterile air system Cleaning/CIP system Carton sterilization system Condition Regular preventive maintenance performed Latest service completed successfully (service complete”) Minor outstanding tasks  ...

REFURBISHED TETRA PAK CAP FLEX 30 THE CAP APPLICATOR FOR HELICAP 23 YEAR 2014 Item #: Usm-258 Category Cap Applicator Refurbished Cap Flex 30 For helicap 23 Year of Manufacturing 2014

Frame top part for a Separator, Ra 3,2 and Ra 6,3. Tetra Pak Eco direct drive or new type B2 Separators. Tetra Pak article number: 581477 80. For example for a Tetra Pak D70 Eco model., Type of Machine: Frame top part, Condition: Unused, Weight: 375 kg

HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine, The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced Ultra-Clean hygienic technology, ensuring extended product shelf life and uncompromising safety., Key Performance Capabilities, - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity)., - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling., - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ide ...

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

TBA 19 200 SQ in excellent condition only 11000 Hrs

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

Refurbished Filler with Cap 88 in excellent condition 100V

Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg

Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: sendzimir galvanized Borehole diameter: 11 mm Weight: 0,330 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Pester Pewo Pack 250 SN

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

R25187/17 PASQUINI & KROMER label machine model: Pakromat 250 S/2 age: 1999 about 1500 working hours available: immediately dimension: length: 3,5 m, height :2,10 m, depth ca. 1,7 m permanently maintained Available: sofort

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Used, plug-in AHT Paris freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm) available in large numbers immediately from stock. The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual  ...

Pester PEWO-pack 250 stretchwrapper for folding cartons, etc., 90 degree infeed conveyor with a total length of approx. 2000 mm, format range cartons min. 30 x 15 x 60 mm (a x b x h), max. 150 x 90 x 180 mm (a x b x h), format range collation/bundle min. 60 x 30 x 60 mm (LxWxH), max. 400 x 180 x 250 mm (LxWxH), suitable for PE-foil with a foil width from 50 to 250 mm and a foil thickness from 0.025 to 0.1 mm, reel diameter of the foil max. 300 mm, electrics 3 x 400 V+N+PE 50 Hz, power consumption 2.7 kW / 4 A, fuse protection 16 A, air consumption 6 norm litres per stroke, operating pressure 5 bar, pneumatic connection 1/2 ", pneumatic pressure min. 5 bar up to max. 10 bar, capacity up to 30 collations/bundles per minute

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Bombled Paris 2500 x 3 mm

Automatic Transfer Switch - ATS Panel - ATI Panel, 250 Ampere - Applicable for generators up to 175 kVA; Gross weight [kg]: 75; Registration Number: 8

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

General SKU345S727 LocationBarneveld MakeBuss-SMS TypeM-2500 No.0020 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature150 °C Main Features MaterialStainless steel Volume2500 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2500 Ltr (bruto 3200 Ltr) Trough sizesdia.1630 x1675mm InletDN300 OutletDN300 With jacket(174 Ltr) Shaft can be heated(60 Ltr) Max. temperature150°C. With mechanical sealcheck Motor30,0 KW, 400/680 Volt Speed mixing shaft1-51 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Year of construction1995 Total height2,8 m Weight± 12.000 kg Extra Specificationsthis Buss-SMS is equipped with a mechanical seal reconditioned by EagleBurgmann- with Fima dust Filter, Type TMF3/1.65, pressure: -1/+1bar, max  ...

🔧 GE-Elements 200 x 250 cm †flexible, versatile, and ready for their next job! Looking for a formwork solution that adapts to your project †while staying budget-friendly? Then take a closer look at our GE elements. 😉 Whether used as hand-set or large-area formwork , these elements provide a solid base for a wide range of applications. Thanks to the modular system , even individual or more complex layouts can be handled without overcomplicating things. 💡 The elements feature a robust flat steel frame and are compatible with all PASCHAL systems †perfect if you want to integrate them into your existing setup. 🔁   👉 Please note: These elements are used and show significant signs of wear . They are best suited for medium to low requirements or projects where functionality matters more than appearance.   With the universal con ...

Pester PEWO-pack 250 compact stretchwrapper for folding cartons, etc., maximum film width 250 mm, maximum format range 180 x 400 x 200 mm, capacity up to 60 bundles per minute