tetra pa 250 used for sale

FRITSCH cone winding machine 250 T, used, technically tested, function tested, partially overhauled with new Teflonized adjustment roller/feed shaft

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Transnorm conveyor belt GF 25050-700-600 RA2152 Technical data: Conveyor length (NL): 25050 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 25050 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of de ...

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg

sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2620 mm true cutting angle adjustable: - back stop - adjustable: 850 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 1,8 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled -Thread holes: M16 -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

Fire extinguisher cabinet for fire extinguishers, powder extinguisher -Fire extinguisher cabinet -Number: 2x cabinets available -Price: per piece -Dimensions: 350/250/H930 mm -Weight: 11.3 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm -Passage: Ø 76 mm -Weight: 26 kg

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm

Key data: 670 mm, 1 mm

Smooth Ai Control Max. turning diameter: 670 mm Max. turning length: 1,011 mm Travel: X/Y/Z: 695/300/1,077 mm B: -30° to +210° (0.0001°) Main spindle drive power: 22 kW Main spindle max. speed: 5,000 rpm Milling spindle Drive power: 24 kW Milling spindle max. speed: 12,000 rpm Tool Magazine 74 Tool Positions Capto C6 Preparation for Renishaw RMP60 Chip Conveyor, Right Discharge Automatic door Air blow-out on the milling spindle Mazak API Cylinder interpolation Overload Monitoring Max. program size: 8 MB G00 slope constant 5-Axis Simultaneous Machining Package for Smooth Ai EIA/ISO Function Simultaneous 5-Axes Tool Center PointControl/Simult.5-Axes Fine Spiline Interpolation (EIA) MT connect adapter Smooth synchronised tapping Robot Interface (Advance/Ethernet/IP)

Key data: 1 mm, 510 mm, 460 mm

Mazak FJV-250 (2PC) Built in 1999 Mazatrol PC Fusion 640 M Control X: 1,020 mm Y: 510 mm Z: 460 mm Table size: 1,200 x 500 mm Milling spindle drive power: 22 kW Max. speed: 12,000 rpm SK-40 Tool magazine with 30 tool positions 2-fold pallet changer 4th axle, Hofmann RWNX-160 with counter holder Mazak Monitoring B, Renishaw OMP60 Probe Cooling by the spindle High-pressure pump, 15 bar Conveyor Zero-point clamping plate

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Key data: 380 mm, 540 mm, 4 1/min

1 pc CNC lathe MAZAK QT Nexus 250-II MSY Year of construction 2016 Mazatrol Matrix II Max. turning diameter 380 mm Max. swing diameter 695 mm Distance between jaws 539.5 mm Max. bar passage 80 mm Travel X/Y/Z/W 234/100/625/585 mm Main spindle 26/22 kW Main spindle Max. speed 4,000 rpm Main spindle spindle nose A2-8 Sub-spindle 11/7.5 kW Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 12-speed tool turret 12 driven tool stations, 5.5 kW Driven tools max. speed 5,000 rpm Toolsetter Parts catcher Chip Conveyor, Right Discharge High-pressure pump, 15 bar Interface for bar feeder Bar Feeder 1 pcs bar loading magazine 1 set of tool holders, 8 fixed + 3 driven tool holders CE mark Documentation

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Key data: 344 mm, 850 mm

CNC turning center MAZAK HQR-250 MSY (850U) Year of manufacture 2018 Smooth G control Travel: X1/X2 axle: 207 /141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axle: 760/815 mm W-axis: 865 mm Max. swing diameter 370 mm Max. turning diameter 344 mm Main spindle 26 kW, A2-8 spindle nose Main spindle max. speed 4,000 rpm Main spindle max. rod passage 80 mm Sub-spindle 22 kW Sub-spindle max. speed 5,000 rpm C-axis sub-spindle, 0.0001° 2 pcs 12-cavity turret with 12 driven tool stations Driven tools 11 kW, max. speed 6,000 rpm Preparation for 10" chuck main spindle Preparation for 8" chuck sub-spindle Precast gripper incl. conveyor belt Air Blowout Main Spindle Air blowout for transfer of main and counter spindle Air Blowing Upper and Lower Turret Coolant through the sub-spindle Overload Monitoring Extended Program Memory 8MB Cylinder interpolation Drilling cycle with torque- ...

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg