133,994 used machines on RESALE, but how to find them? Machine Search
This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.
This 3-axis SELCO WN750 panel saw was manufactured in 2009. It is designed for efficient and precise cutting of panels. Consider the opportunity to buy this SELCO WN750 panel saw. Contact us for more information.
This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information.
This panel saw was manufactured in 2000. Consider the opportunity to buy this GIBEN panel saw. Contact us for more information.
An automatic tray sealing machine Mondini for the food industry (meat) is available. Packaging technology: MAP, number of trays per cycle: 4, max. cycle rate: 28/min, machine dimensions X/Y/Z: approx. 4400mm/7900mm/1750mm. Documentation available. An on-site inspection is possible.
Becker BZ-2 Atomic - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of construction 2020 In the system, a trimming is first carried out at the front of the cardboard in order to to cut off possible damage to the van. After trimming, a Edge trimming on both sides of at least 30 mm each. Furthermore, if necessary, a corner is cut off from the cardboard. This is depending on the type of Fefco different. Finally, the cardboard is creased at the folding points and removed from the machine. The waste that is generated is transported by means of a waste belt underneath outside the machine. At the machine outlet there is a Conveyor belt, which disposes of the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily removed from the of the plant. The blanks and the ...
Cam Automatic Baby Diaper, Sanitary Napkin, Dry Wipes, Wet wipes Packing Machine 300 Automatic wet wipes, dry wipes, Sanitary Napkin Packing Machine- 60ppm CAM-300 Automatic Baby Diaper, Wet wipes, Dry wipes, Sanitary Napkin Packing Machine wet wipes dry wipes pads food pads packing line Main Features ☆ Fully servo driven,Servo motor management by electronic CAM ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consum ...
This TIGER UKA 600 Cross cut installation was manufactured in 2015. It features a 600 mm saw blade, a cutting capacity of 165 x 240 mm at 90 degrees, and a motor power of 5.5 Kw. The machine includes a TigerStop 7.5 Automatic Stop and pusher, enhancing precision and efficiency. Ideal for semi-automatic or fully automatic operations, it supports a maximum feed speed of 40 m/min. Contact us for more information about this machine.
This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine.
This panel saw was manufactured in 2011. It features a maximum panel width of 4500 mm and length of 2200 mm, with a saw blade projection of 127 mm. It includes a lifting table, 9 grippers on the sliding stop, and flexible grippers for NC positioning. The saw unit supports a tool diameter up to 470 mm and operates with a motor power of 18.5 KW. Consider the opportunity to buy this SELCO WNTR 730 panel saw. Contact us for more information.
Cutting length: 4300mm, cutting height: 2200mm, cutting depth: 80mm, saw blade diameter: 30mm, bore: 30mm, speed: 4000rpm, machine dimensions X/Y/Z: approx. 5400mm/2900mm/1700mm, weight: approx. 1100kg. On site inspection is possible.
This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information.
Reference ID: PP-56192 Category: Guillotines Manufacturer: Wohlenberg Model: 155 Year: 2000 Max. size: 155 cm Condition: Good Location: Europe Availability: Immediately
This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information.
used
GAS TURBINE PACKAGE – GE LM 6000 PD 48 MW 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: GE Model: LM 6000 Year: 2002 Hours : 38 000 Condition: Used – Good Operating Condition loaded in france
This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine.
This BOMAR STG 320 GM panel saw was manufactured in 2002. It features stepless mitre adjustments at 90°, 45°, and 30°, automatic shutoff after cutting, hydropneumatic descent control, and electrical belt tensioning. Equipped with a coolant pump and chip cleaning brush, it ensures efficient operation. Ideal for diverse cutting tasks, the BOMAR STG 320 GM machine we have for sale is a robust addition to any workshop. Contact us for further details regarding this panel saw.
This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 Ã 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 Ã 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information.
A palletizing and depalletizing system Otto Fleischer (Flema) for crates is available. Pallet types: NRW pallet/Euro pallet/beer pallet, palletizing capacity: 500crates/h, beer pallet dimensions X/Y: 1200mm/1000mm, operating pressure: 4bar. Documentation available. On-site inspection is possible.
This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine.
Frame Inner Dimension: 1450 x 1650mm Gas Type: Propane Operating pressure: 7 bar
Overview This CHM MPR automatic palletizer was manufactured in 2015 and was last used for repalletizing Euro pallets onto smaller pallets. The machine has an empty pallet magazine and automatic feeding of the empty pallets. Technical details Last output: 3-4 pallets/h (low speed due to the distance for manual order picking between palletizer and wrapper, can handle significantly more) Equipment: Feeding of empty pallets (80x60, 93x80) Empty pallet magazine Feeding of empty pallets (Euro pallet, Industrial pallet, CP1 pallet) Integrated compressor Pressure: 6 bar Voltage: 400 V Frequency: 50 Hz Additionally available: Roller conveyor
centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Condition: unused: Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us.
This ANTHON CUTTING SYSTEM was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON CUTTING SYSTEM machine we have for sale. Contact us for more information about this machine.
AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in assembl ...
This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.
An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible.
Manufacturer: IMA Model: C23 Year of Manufacture: 1994 Machine type:tea packaging machines Power: 6.7 KW Voltage: 395 V Current: 11.2 A Phases: 3 Frequency: 50 Hz Find more here - / Contact us at -
Complete SIMCA SUPERVISOR Automatic Corrugated Box Production Line with A-Print Control System This advanced production line is engineered for high efficiency manufacturing of corrugated cardboard boxes. The system provides a fully integrated solution that combines feeding, flexographic printing, slotting and creasing, and rotary die cutting operations in a single synchronized platform with digital control interface. Technical Specifications: Board Dimensions: Length 1130 millimeters, Width 969 millimeters Material Thickness: 3.0 millimeters Box Blank Dimensions: Length 310 millimeters, Width 220 millimeters, Height 220 millimeters Line Configuration: Slotter Section: Slotting Knife 1: 903.8, Caliper Rotary 2.1 Slotting Knife 2: 555.3, Flaps 0.0 Slotting Knife 3: 547.3, Hem and Hook 1000.0, Caliper Rollen 2.7 Slotting Knife 4: 846.3, Caliper Roll Outer 1.0 Slotting Knife 5: 1 ...
A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.
This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details.
Key data: 4300 mm
older Gebr. Panel saw incl. extraction Technical data ( data according to brochure ) Saw blade diameter 300 mm Cutting depth yes depending on material 70 / 80 mm Cutting length 4300 mm Weight approx. 900 kg Space requirement approx. 6000 x 1500 x Height 2900 mm
Sliding table length: 2800mm, Cutting width: 1000mm, Saw blade tilting: 45°, Saw blade diameter min./max.: 250mm/450mm, Motor power: 5.5kW, Weight: approx. 1250kg. An on-site inspection is possible.
Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.
Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack trusses, used Material colour: grey INP profile: 80 x 42 mm Truss Type: TRV1-180-08-I Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 2,700 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Polar 92 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term
Key data: 2 , 10
New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...
1993 Airtable Side tables (air) Light barrier Programmable Jogger–RAB2 Lift – L600-3 Three extra spare knifes In production Located: Germany Available: 05/2026
Stock number: F733, In stock: Yes, Amount in stock: 1 pc., Item: Packaging plant, Motor: 3500 Watt - 220 Volt, Product size: Max W 420 x L 550 mm., Manufacturer: Dibi-Pack, Model: 4255 Conf.term
Stock number: F721, In stock: Yes, Amount in stock: 1 pc., Item: Bundle packaging machine, Welding length: Max 1000 mm., Manufacturer: Elwis, Type: 14 J 090, Model: Packaging machine for packing/bundle of units
For sale is a Fanuc control panel Type AO5B-2301-C375 Fully functional Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.
Technical data for the pallet racking system: Shelving system: Feralco Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 22,455 mm Number of fields per row of shelves: 08 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Type: 20 M Profile size: 95 x 60 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,550 mm high 1,250 mm deep 32x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss type: 80 E15 Agraffe: 3 HK (hook) Clear width: 2,700 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 64x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members aga ...
For Sale: Automated Film Wrapping and Strapping Packaging Machines 1. Film Wrapping and Shrink Packaging Machine — CMB 600 Manufacturer: CMB Model: 600 Description: Automated film‑wrapping and shrink‑packaging machine designed to wrap products in suitable plastic films, seal them, and optionally shrink them for stable, transport‑ready bundles, operating with multiple modules, safety systems, and format‑adjustment options. 2. Automatic Strapping Machine — RQ-8X Manufacturer: StraPack Corp Model: RQ-8X Automatic Strapping Machine Description: An automatic strapping machine that applies, tensions, and seals polypropylene straps around packages to secure them quickly and consistently. Benefits of Combined System Together, both machines serve to stabilize, protect, and prepare goods efficiently for storage or shipment through reliable wrapping and strapping processes. F ...
Polar 115 Autotrim Cutting Line Year 1999 Size 115 Cm Transomat TR 130 EL-4 Jogger RA-4 Lifter LW 1000-4
Polar 115 Autotrim Cutting Line Year 1999 Size 115 Cm Transomat TR 130 EL-4 Jogger RA-4 Lifter LW 1000-4
Polar 78 N+, Year 2025 Display Program Airtable Airtable left Airtable right Etc. Available: immediately
Stock number: F1112, In stock: Yes, Amount in stock: 1 pc., Item: Stretch wrapping machine, Product size: L 1200 x W 1000 x H 2300 mm., Capacity: Approx. 35 pallets/hour, Pallet weight: Max 1500 kg., Roll width: Max 500 mm., Diameter: Ø 1500 mm. roundel excl. ramp, Other: Prepared for weighing cells
maximum number of results exceeded
please refine your search
