tetra pa 250 used for sale

New and unused 2019 generator set with 0 running hours.; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Rated current (A): 2500, Poles: 3; Gross weight [kg]: 61; Accessories: Multiple breakers in stock!, NEW/UNUSED

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 500

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Tehabo Model ERU 2500

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3076x1250x1600 mm Weight: 2000 kg Total power requirement: 25,32 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x700x1900 mm Weight: 300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3750x1400x1750 mm Weight: 1600 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used steam boiler made by Roucka, capacity 2.5 tons of steam per hour and pressure 9.2 bar. New 1994. Oil burner, control cabinet, fittings.

Shuffle-mix 250 mixer / aerator 200-103 Stainless mixer, 250L, mobile frame, 3Ph

Electrode welding machine Zinser 380 V 32 A Welding current 20-250 A 7 m connection cable Dray Welding cable Ground cable

GEBR. Für weitere Informationen kontaktieren Sie mich bitte

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: TCD 2013 L06 4 V Engine No.: in production Power: 250 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K 1 Gene. No.: in production Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 500 Dimensions of the power unit: Width approx. mm: 1.100 Height approx. mm ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD841GE Engine No.: 3008598229 Power: 254 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford Generator type: UCDI274K Gene. No.: N22E211704 Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1,200 mm Height approx. mm: 2.291 mm Length app ...

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Key data: 2500 mm, 521 , 55

Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers

; Gross weight [kg]: 652

Double cone kneader, Fabr. W&P DK 250

Pastry Forming Machine, RNK, GM 250 Export

Pastry Forming Machine, RNK, GM 250 Export

Bench scale, running weight scale, 250 to 6000 g

Double cone kneader, Fabr. W & P, Type DK 250

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.