tetra line used for sale

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Gouda Euroblock Cheese Production Line for Sale due to the installation of a larger cheese production line within the existing cheese factory. The plant was designed for a milk intake capacity of approximately 100.000 litres per day, producing around 10.000 kg of Gouda cheese per day. The line manufactures Gouda cheese in Euroblock format, with dimensions of 500 x 300 x approximately 100 mm and an average weight of 15 kg per block. This corresponds to a daily production of approximately 650 Gouda cheese blocks., The production line consists of the following main components:, - 2 x Closed Cheese Vats with Whey Extraction Sieve., Manufacturer: Tetra Pak Tebel, Type: OST IV, Year: 1991, Capacity: 8,000 litres each, Cheese Vat 1:, Stocknumber: #1005, .hamburg-machinery/listings/4811812-used-cheesevat-tebel-tetra-pak-ost -iv, Cheese Vat 2:, Stocknumber: #1006, .hamburg-machinery/listings/4811 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

for 200, 250 and 330 ml

1000 ml, 750 ml, 500 ml, 250 ml,

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

Item number 1334989-0101 Level Sonde for TBA 21 aseptic filling machine

New Tetra Pak ® spare parts, -> We send you our list on request

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

Motor control card Bendingroller for TBA / 8 ASU

Output card TPMC PLC for Tetra Pak TBA 8 aseptic filling machine Output module TP OM16

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

Decorative holding card TMCC

Item number 558321-0101 IH switching card for TBA 8 aseptic filling machine

SKU: 90025-0055 Power supply TPMC PLC for aseptic filling machine TBA 8

Item number 90025-0017 Input card TPMC PLC for TBA 8 aseptic filling machine

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Article number: 1260522-0000 Photocell PT 21 for Tetra Pak Pull Tab Applicator 21

Item nr.: 1520450-0000 Inductor PT 21 for Tetra Pak Pull Tab Applicator

Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator

article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8

SKU: 90458-0602 Photocell for PT 21 Pull Tab applicator and ASU of the A3 flex aseptic filling machine

article nr.: 1282939-0000 Roller for PT 8 Tetra Pak Pull Tab Applicator

article nr.: 67379-0202 or 67379-202 Transformer, Trafo, Transformer TBA 21 Tetra Pak aseptic filling machine

SKU: 90410-0051 Temperature controller KS 40 for e.g. TBA 8 Tetra Pak aseptic filling machine

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before

Item number 90023-0051 Output module green l771-OC Allen Bradley for Tetra Pak TBA 8 or TBA 9 aseptic filling machine technology version 50 V and in front

Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine

Item number 90023-0081 1711-DKC (24 V) Gray Encoder Module Allen Bradley for Tetra Pak TBA 8, TBA 9 aseptic filling machine technology version 50 V or before

Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable

Item number 68450-0101 Karte Step Motor PT8/10 Alu o. PE Stepper Motor Driver for Tetra Pak PT 8, PT 10 (pull tab applicator)

Item number 2606305-0000 Volume flap 1 litre Square for TBA 21 Tetra Pak aseptic filling machine

We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved

Dossys Tetra Pak Dosys System for Fruit Dosing before filling in Yoghurt Cups

Microfiltration System – Bacteria Removal (Dairy Applications) General Information: - Manufacturer: Tetra Pak - Model: Tetra Alcross M - Year: 2005 - Automation: Fully automatic - Application: Bacteria extraction / microfiltration for dairy products System Overview: The Tetra Alcross M is an industrial-grade microfiltration system designed for efficient bacterial and spore reduction in dairy processing, particularly in skim milk applications. Engineered for continuous production, the system utilizes high-performance ceramic double-layer membranes, enabling reliable separation performance and consistent product quality. This technology is widely used in ESL milk production and other high-hygiene dairy processes, where stable filtration performance and sanitary design are critical. The robust construction and proven reliability of the Tetra Alcross platform make it su ...

Film Wrapper Machine – TFW67 General Information: - Manufacturer: Tetra Pak - Model: TFW67 - Year of Manufacturing: 2004 - Condition: Used - Machine Type: Film Wrapper / Secondary Packaging Machine System Overview: The Tetra Pak TFW67 Film Wrapper is a high-performance secondary packaging machine designed for automatic film wrapping of carton packs in demanding industrial environments. Built for continuous operation, the TFW67 ensures reliable pack collation, precise film application, and consistent sealing quality, making it a proven solution in dairy and beverage production lines. This model is widely recognized for its robust construction, stable high-speed performance, and seamless integration into existing Tetra Pak packaging systems. Technical Specifications: - Packaging Formats - 4 × 1 - 4 × 2 Output Capacity: - Up to 9,000 packs per hour Ope ...

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves