tetra 200 used for sale

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

TOX Power powerhouse in good condition Type K 4.200.20

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

Robot Kuka KR200-2 construction year 2000 reach 2400 mms weight 1125 kg load 200 kg control KRC1 with 7-th axis in the construction cupboard weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

Robot Kuka KR210 Series 2000 Built 2002/2004 Range 2700mm Weight 1245kg Payload 210kg Control VKRC2 (VW/Audi version) Weight 185kg Software stand V4.1.7 SP08 (Standard Kuka software, no VW) Kuka KCP2 Interconnectors 7m ..

Robot Kuka KR180 series in 2000 construction year 2001 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Power: 200 kVA / 160 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AvK / DKB 55/200-4/420703 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

Drive: 4 KW

Ladies and gentlemen, below the offer for a used 200 beds hospital The entire technology can be checked before handover. Prices: on request We are also happy to offer you other new and used medical devices. We would be pleased to have your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buye ...

Input pinion Drawings Nr. 20015-76D2

Central gear Drawing no. 20015-97

Side wheel Drawing no. 20015-81, 20015-82D2

big wheel Drawing no. 20015-19

Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...

Robot Kuka KR150 series in 2000 construction year 2006 reach 2700 mms weight 1245 kg load 150 kg control KRC2 ed05 weight 185 kg software state V5.3.6 Kuka KCP2 ed05 connecting pipelines 15 m .

Robot Kuka KR180L130 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 130 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180L150 series in 2000 construction year 2002 reach 2900 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR150 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

90 KW / 50 Hz.

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Generator 200 kVA (hood unit) power: 200 kVA / 160 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF67TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 6.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 45.5 l / h Fuel consumption 75% PRP: 41.9 l / h Fuel consumption 50% PRP: 29.9 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter exhaust pipe output: 70 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protect ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 2000 x 2000 Plate size: 2000x2000mm Cake thickness: 20 mm / 30 mm Useful length: 12000 mm Chamber number: 121 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 320 bar Cake volume: approx. 8.1 m3 Expiration: closed Plate material: PP

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

2 pcs. Siemens 800 ampere 1 pc. Merlin Gerin 2000 Ampere As good as new !

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

M. No.: 2277

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

Ready to ship

New machine 24-month warranty Benefits: + TOP value for money + robust planetary stirrer with simple, manual control + 3 speeds can be switched by lever, bel constant power transmission + with stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 20 litre stainless steel boilers - additional tools (stirring whisk, flat stirrer, kneading hook) Technical data: - Engine power: 1.1 kW ...