tetra 200 used for sale

Electrolux Smart Variomix 200L Boiling pan 2017, Stainless, 200L cooking kettle, electrically heated, 39.7Kw, max temp 127'c, with spare mixing arm and spare parts, 3Ph

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Used complete steam boiler room from Viessmann. It consists of two steam boilers from Viessmann Vitomax 200-HS type M75A231. Year of manufacture 2015. CE The capacity of each boiler is 5.53 Tons of steam/h. Operating pressure 13 bar. CE

Rotor laboratory shredder RETSCH ZM 200 (ZM200) Model: ZM200. Rotational speed: from 6000 to 18000 rpm Initial size: up to 10mm Final fineness: < 40μm With new standard cassette With stainless steel file rotor, 12 teeth Without sieves Power Consumption: 1300W Dimensions: 410 x 515 x 365mm Weight: 38Kg Year of manufacture: 2015 In excellent condition

General SKU050Y334 LocationBarneveld MakeNetzsch Mastermix Aldridge TypePMD-200 Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel Closed stirring vesselPolymer Preparation Mixer (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrerscraper stirrer Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniserHigh speed disperser hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) MaterialStainless steel 1.4301 (304) Information Year of construction1992 Mounted on legscheck ATEX compatiblecheck Extra Specifications- High spee ...

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 1107 kg,

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 1278 kg,

Net weight= 1260 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 1272 kg,

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

LEICA DM 2000 Microscope (DM2000) - 3 Objectives Model: DM2000 Binocular Head Adjustable eyepieces HC PLAN s 10x/22 3 objectives: Plane 10x/0.22 Infinity / - / B Plane 40x/0.65 Infinity/0.17/D 100x Plan/1.25 Infinite Oil / 0.17 12V Lamp - Max 30W Average condition Power cord

Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,

Extendable lifting mixer Diosna M 200 A Capacity in dough: 200 kg Yield in flour: 125 kg Tub capacity: 300 l Tub diameter: 900 mm Automatic timer with two clocks Two speed settings Boiler scraper (removable) Incl. 2 vat wagons

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Extendable lifting mixer Diosna D 200 A Capacity in dough: 200 kg Yield in flour: 125 kg Tub capacity: 300 l Tub diameter: 900 mm Automatic timer with 2 clocks Two speed settings

Ref. no.: 18597 Hersteller: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg

Extendable lifting mixer Diosna D 200 A Capacity in dough: 200 kg Yield in flour: 125 kg Tub capacity: 300 l Tub diameter: 900 mm Automatic timer with 2 clocks Two speed settings

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Used skewer from MiVEG type KW-2001.

General SKU228Y124 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (200 l.) Vessel sizesDia. 900x700 mm Dished bottomcheck Top connectionscheck OutletDN35 With jacketcheck volume 11,75 l. Max. temperature-10/150 With anchor stirrercheck Motor1,5 kW (400 V 1461 rpm) Speed mixing shaft41 rpm With homogenisercheck Motor4,0 kW, (380 V, 2905 rpm) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information MakeNiro Croatia SerialNIC-17-04 TypeCV-201-NR-200 Year of construction2017 Mounted on legscheck With switchgearcheck Floor space1,10x1,10 m Total height1,60 m Weight620 kg Extra SpecificationsWith ball cleaning, con ...

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Key data: 1 mm, 10 mm

Hebrock EURO 2000 edge banding machine - completely overhauled, immediately ready for use - others just push through - We check! You can find a video about the machine on our website. For sale is a reliable and solid edge banding machine made in Germany. The machine has been technically revised and is ready for immediate operation – ideal for carpenters looking for a robust solution without investing in new machines. Radius and chamfer pneumatically adjustable. Machine can be tested on site. Condition / Works: • All pneumatic hoses renewed • 2 master cylinders new • Machine fully cleaned • Technically tested and ready for use Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2001 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working Range:  ...

z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...

Description Blumer Atlas 200 Label die-cutter ideal for small labels, banderoles and tax or value coupons from 1992, but very little used with tape feeder SE 18.4 Cross-section device Punching unit ST 18.2 Inline tape machine PB 18.2 and output channel Strip sizes: Length of the tape min. / max. 350 / 1115 mm Width of the tape min. / max. 45 / 215 mm (the smallest dimension is 20 x 44 mm) Label sizes: Pre-cut label size min. 25 x 45 mm Pre-cut label size max. 170 x 215 mm Stack height min. / max. 40 / 120 mm Intermediate bleed 3 – 40 mm Blank 3 �

Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame

General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filterAir Handler Unit MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshDiscountFluid bed dryers batchGlattDiscountDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

The Stork Westfalia Menger with a capacity of 200 liters is a versatile and robust device, ideal for applications in the food industry. This mixing machine is excellent for efficiently mixing, cooking, and cooling various ingredients. It is used but in good condition and ready for immediate use. The machine was workshop-overhauled about 5 years ago (new long-term storage, new belts, etc.), since then it has run for only about 10 hours as a test mixer. With its reliable construction and high-quality workmanship, the machine ensures smooth operation and a long service life. The 200-liter capacity allows larger quantities to be processed in a single pass, which can significantly increase efficiency in your production process. The Stork Westfalia Menger 200 liter is characterized by ease of use and maintenance friendliness. It is a cost-effective and powerful solution for operations seeking  ...

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

Key data: 70 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

CNC machining center Type: Integrex J-200 S Manufacturer: Mazak Year: 2015 Control: Mazatrol SmoothG 5-axis turning + milling in one clamping X: 450 mm Y: 200 mm Z: 960 mm B axis C axis Main spindle speed: 5000 rpm Subspindle: allows complete machining from both sides without re-clamping Max working diameter: 500 mm Max working length: 910 mm Tool tray: 36 positions Capto C6 / PSC63 Internal cooling A large number of accessories (jaws, clamps, holders, etc.) Part of the sale is a functional post-processor for SolidCAM Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.

Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg