126,618 used machines on RESALE, but how to find them? Machine Search
Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
Magnet L x W x H: (1.450 + 650=) 2.100 x 1.200 x 410mm. (130mm. Transportmagnet) - Belt: 1.200mm. - AA.: Ca. 2.850mm.
Belt withness; 2.000 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.
Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!
2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at ...
Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Working Hours: 600 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 303 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-ds14a01-generator-200kv a-used/42311, , = More information =, , Empty weight: 3.000 kg, Type number: DS14A01 GENERATOR 200KVA
B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
Inv. Num. : 8807 Type: PROVITE 2000/120 Producer: Plastmashines Germany Created: 2011 Parameters: Capacity: 400 kg/h Line mounting: Main control panel and monitoring system Mixing/homogenizing tanks Engines Extruder Vacuum pump for degassing Melt filter Closed Water Cooling and Pellet Drying System Unloading silo BOCO PARDUBICE Machines Corner Conveyor Belt Mercedes
Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...
Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 10249 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 289 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-1500-pk51589-generator -200-kva-used/72, , = More information =, , Empty weight: 4.775 kg, Type number: 1500 PK51589 GENERATOR 200 KVA
Work table AT 2000 with beech wood top and drawers Work table Baker's table mobile Beech wood worktop with gallery at the back Drawer block left right 2 shelves Stainless steel Approx. dimensions: 2000 x 800 x 980 mm, WxDxH Used device cleaned Plate sanded & re-oiled Option: Delivery Castors / Wheels New
Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 9405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42307, , = More information =, , Empty weight: 1.970 kg, Type number: 6068HFU82 GENERATOR 200KVA
Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 8540 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42306, , = More information =, , Empty weight: 2.030 kg, Type number: 6068HFU82 GENERATOR 200KVA
Properties: Volume 5200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3800 mm Height 2980 mm Diameter width 2550 mm Weight 500 kg Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable
plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t - number of bottom rollers: 21/24 - Number of supports (top/bottom): 3 /3 - speedof adjustm. of traverse: 0,71 mm / sec - way oftraverse: -18 mm to +42 mm - max. swivellower traverse: 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Noise Rating: 64.6 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 218; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822
Packer, Fabr. Flema, 200 crates/h for 20x0.5 lt EURO bottles, built in 1994, functional, regularly serviced ex brewery.
Specifications: Areas of work: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 1/min Grinding area, max.: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing machine, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table-spindle center: 800 mm Table height: 900 mm Table load, max.: 2200 kg Weight, approx.: 12,000 kg Equipment: - Control Siemens SINUMERIK 840D, control panel OPO12 -System - Electro-magnetic clamping plate - Full-space encapsulation -Central lubrication - Mist extraction - Clamping system for autom. Disc replacement - Coolant device - Cooling water recooler
TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm
Aventics R412019043 MSC 200-25, 10 BAR 16W39 Slide Item condition: Used, in perfect condition You can find more ejectors - new and used - in our shop! International shipping costs on request!
Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.
ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs
Ref. no.: 18494 Hersteller: ENGEL Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs
Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, other sizes possible depending on format set Output approx. 6000 bottles/h with format for round bottles Ø 24 mm x length 52 mm Feed hopper with lifting device, aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) 240V/50 Hz
An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS & ...
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
ID3646 Liedlbauer Bullcon 2001 year/Baujahr 2000 approx. 2.570 hours/hours 13 t Mobile impact crusher on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been refurbished and serviced, ready for use, optionally 2 pallets of wear and spare parts available Mobile impact mill on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been prepared and after-sales service has been carried out, condition ready for use, optional 2 pallets of wear and spare parts available
Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...
diameter: 315 mm bore: 89 mm dimensions of the machine ca.: m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2690 Nominal / outside width in mm: 200, 120 Roll division in mm: 75 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einf ...
Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1160x750x1080 mm Weight: 260 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 17 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2700x900x1900 mm Weight: 800 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x3010x1250 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x1600x1500 mm Weight: 1550 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x2800x1100 mm Weight: 310 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2950x1620x1770 mm Weight: 3300 kg Total power requirement: 71,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25515 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with CNC control DELEM , DA - Two-hand control panel with foot switch - Controlled crowning device - Back gauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported - Sharpening tool + V-die
Key data: 2000 kN
Clamping unit very well preserved, see pictures, also fits 570A as a spare part
Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...
For plastic scraps, in most cases without need to reduce size The offer includes:, STORAGE HORIZONTAL BELT, to grant non-stop feeding, DIAGONAL LOADING BELT, made in sturdy carbon steel with side walls, dragging paddles, PVC carpet, AGGLOMERATOR with barrel Ø1.500 mm.,, length 4300 mm. width 2300 mm. height 5.050 mm. 560 kw , Hp 730 65% used in work Side opening panel for inspection and replacing blades Operator switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam sucking vent 4 kW UNLOADING HOPPER, complete with 200 mm Ø, diagonal auger for agglomerated material 1,5 kW drive., size 1.150 mm. x 2.000 mm. Lower opening for cleaning purposes Operations, upper lid, two inspection windows (one can be o ...
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
maximum number of results exceeded
please refine your search
