tetra 200 used for sale

High-pressure clamp vise MC2 / 200 ORIGINAL PRICE: ~ $1,650.00 Description: - Body made of cast iron FCD 65, jaws made of steel - Ground on the bottom and sides - Anti-lift mechanism - Built-in pull-down mechanism - Mechanical force amplification, seal-free and maintenance-free - Short design - Clamping force can be preset Technical data: Jaw width: 200 mm Vise opening: 300 mm Jaw height: 55 mm Dimensions: 600 x 180 x 210 mm Weight: approx. 90 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Key data: 4000 mm, 2000 mm

Cutting surface: 2,000 x 4,000 mm Top height: 290 mm Weight: 5 ton

Offer 25352 Hydr. Manipulator - Positioning - Welding Rotary and Tilting Table Specifications: - Max. load capacity incl. work table 2000 kg - Effective payload 1700 kg - Face plate hydraulically swivel 0 - 180 ° - hydr. Height adjustment of the face plate - Table moves in the last inclination or horizontally approached - Rotary movement electrically hydraulic with right + counterclockwise rotation - min. / max. rotation speed 0.75 - 2.0 rpm - 3 D work table DEMMLER 800 x 800 mm - min./ max. table height in horizontal position - approx. 600 / 1550 mm - Welding current transmission approx. 600 A - Drive 400 V - Handheld remote control + E. foot switch - Space requirement approx. W 2100 x H 600 x D 1500 mm - Weight approx. 1200 kg

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190

Clamping Force: 200 ton

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2008 en verkeert in gebruikte, maar goede staat. Merk: SICA S.p.A Bwj Ud Dotpg Avovycow Type: TRS/SY 32-250 C 2000 Serienummer: 0817501 Bouwjaar: 2008 Spanning: 400 V Vermogen: 6 kW Buisdiameter max. 32 - 250 Ø (mm)

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Gathering Machine Horizon VAC 100 a/c + SPF-200A + FC-200A Year of construction 2009 Art.Nr. L1103 Collector Horizon VAC 100 a + c Sewing Machine SPF-200A Trimmer FC-200A Turret "a" 2.08 million, trimmer 2.04 million

1 Clamp Binder, Glue Milling device, Cover Station

Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 Description Tank topstock: Manhol ...

- Live tools 30 kw and 3000 Rpm with Sk50 - Full C-Axis 360.000  - Work load 10.000 Kg - Grinding spindel 30 kw and 3000 Rpm with Sk50 - Chip conveyor - Tool holders included max 400 mm height -  

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.

Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serie nr.: 08 020 044/07 0135 Dry Air Quantity : 200 m3 / h Hopper capacity: 3 × 300 dm³ Connected Load max KW: 38 kW Year of manufacturing 2015 and Model: PTUSET Year of manufacturing 2017 Connected Load max KW: 9,0

A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.

Key data: 1800 mm, 2000 mm, 1100 mm

Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor

x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm tool taper: 2500 x 600 mm control: 2000 kg tool magazin:: SK40 rapid traverse: HEIDENHAIN table-size: 30 - 8000 U/min feed: 45 m/min total power requirement: 45 m/min workpiece weight max.: 20 kW diameter of tools max.: 10500 kg tool length - max.: 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU212T477 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408 Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Information Mach.No.92214540915360000 Floorspace1x0,7 m CEcheck Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T487 LocationBarneveld MakeAPV TypeWA-35/55-380 Mach.No.92214540915360000 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel Information Year of construction1997 Total height0,6 m Floorspace1x0,7 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T484 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 400-690 Volt (ATB Motortechnik)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Mach.No.92214540915360000 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316W650 LocationBarneveld MakeCoperion (type plate missing) TypeZVH-250.2-8SC Year of constructionUnknown Main Features MaterialStainless steel/chrome Motor0.55 KW Inlet diameter165 mm Specified Features - Rotating valve MaterialHard chrome, Stainless steel 1.4016, Stellite 1 Alloy Rotary valvecheck Rotor diameter200 mm Rotor width250 mm Number of locks:10 Lock sizes55x180x60 mm Capacityrotor ± 4,75 L Inlet165 mm Outlet50 mm Installation height360 mm With motor0,55 kW, 380/500 volt, 1400 rpm Rotor speed16,6 rpm Outside bearingscheck Information Mounted on framecheck Floorspace1,10 x 0,90 m Total height0,92 m Weight180 kg Technical specs Extra informationcapacity ± 4,7 m³/hRotating valvesCoperionRotary valves > Rotating valvesBrand > Coperion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

General SKU347W892 LocationBarneveld MakeReisopack Type2000 Mach.No.2003109 Main Features MaterialStainless steel Motor0.25 KW Specified Features - Miscellaneous MaterialStainless steel Capacity1200x850 mm Motor0,25 kW, 230/400 volt, 1360 rpm Information Year of construction2005 Total height2,15 m CEcheck Floor space1,40x0,70 m Weight300 kg Extra SpecificationsVertical Strappingmachine, binderwindow 1200x850 mm, polyester band size 11x0,50 mm, with rollholder MiscellaneousReisopackMiscellaneous > MiscellaneousBrand > Reisopack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...

General SKU204U937 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.083815 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200 ltr/min, Hmax 80 m, 2800 rpm Motor400-690 volt, 4 kW, 2950 rpm With temperature controllercheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,60x0,32 m Total height1,21 m Weight309 kg Extra SpecificationsPower 30.6 kVA, 44.2 A, test pressure 32,5 bar enclosure of machine not complete. Temperature control unitsSingle TemperiertechnikHeat exchangers > Tempera ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle Temper ...

General SKU366W1280 LocationBarneveld MakeQVF Glasstechnik No.B19.. Main Features MaterialGlass Volume200 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity200 l. Vessel sizesdia. 500x1300mm Dished topcheck Dished bottomcheck Top connectionscheck Outletcheck Information Floorspace0,50x0,50 m Total height1,50 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU004B043 LocationBarneveld MakeAltmayer Rehlingen/Waeschle TypeZGB 200.1-4.5-AC No.68435/10 Year of construction1997, Valve has never been used Material Housing materialCast aluminium hard-coated Rotor materialStainless steel Main Features MaterialAluminium/Stainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialAluminium, Stainless steel Rotary valve(1x) Rotor diameter200mm Rotor width180mm Inletdia. 160mm Inlet flange sizesdia. 280mm Installation height360mm With motor0,37 KW, 230/400 Volt Information Floorspace0,6x0,6 M Total height0,6 M Weight40 KG Extra SpecificationsMax temperature 70 degree C Technical specs Extra informationMax temperature 70 degree CRotating valvesAltmayerRotary valves > Rotating valvesBrand > Altmayer What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...

General SKU204U1433 LocationBarneveld MakeCollin Type202x400 No.1209-06-07 Year of construction2007 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width450 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck ( steel wheels) Total height1,96 m Weight1900 kg CEcheck Floorspace2,25x1,34 m Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU398U1172 LocationBarneveld MakeAtlas Copc TypeGV 200 Mach.No.1300515 Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume205000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck High vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity205 m³/h With motor5,5 kW Information Year of construction2013 Total height0,65 m CEcheck Floorspace0,47x0,33 m Weight155 kg Extra SpecificationsUNUSED Vacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU209W096 LocationBarneveld MakeDiessel Type200L No.96 18 2302 Year of construction1996 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity250 Ltr. (200 Ltr.) Vessel sizesDia. 644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Weight180 kg Floorspace0,80 x 0,85 m Total height1,75 mPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU366W1267 LocationBarneveld MakeQVF Glasstechnik No.B15.33 Main Features MaterialGlass Volume200 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity200 l. Vessel sizesdia. 400x1400 mm Dished topcheck Dished bottomcheck OutletDN40 Information Floorspace0,45x0,45 m Total height2,0 m Extra SpecificationsWith Vega temperature sensorVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU209W102 LocationBarneveld MakeDiessel No.96 18 2308 Year of construction1996 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Floorspace0,80X0,90 m Total height1,72 m Weight190 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...

General SKU209W098 LocationBarneveld MakeDiessel No.96 18 2305 Year of construction1996 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Floorspace0,80x0,85 m Total height1,72 m Weight190 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...

General SKU209W094 LocationBarneveld MakeDiessel Type200L No.96182306 Year of construction1996 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity250 Ltr. (Netto 200 Ltr.) Vessel sizesDia.644 x 800 mm Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C Information Mounted on legscheck wheels Weight190 kg Floorspace0,80 x 0,90 m Total height1,75 mPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU204U929 LocationBarneveld MakeCollin TypeForm 202x400 Year of construction2006 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width405 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck Mounted on wheelscheck ( steel wheels) Floorspace1,34x2,25 m CEcheck Total height1,96 m Weight1900 kg Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU294W552 LocationBarneveld MakeAmersham TypeFineLine 200 PL No.20003970 Year of construction2005 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,50 m Weight80 kg CEcheck Floor space0,60 x 0,60 m ATEX compatiblecheck Extra SpecificationsColumn volume 23 l., allowable pressure 20 bar g, test pressure 28,6 bar g. Inner dia. 200 mm, inner length 700 mm : Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKU303N411 LocationBarneveld MakeFrewitt Fribourg TypeSG-200 Year of construction(unknown, manufactering tag is missing Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sieveSieving, sizing and rasping machine Sieve sizesdia.200mm x160mm Sieve perforation+/- 3mm Inletdia.200mm Outletdia.250mm Motor4 KW (Ex) With variable speed drivecheck Speed257-1472 rpm MaterialStainless steel Information With switchcheck Floor space1,5x1,2 M Total height1,4 M Weight300 KG ATEX compatiblecheckSieve granulatorsFrewitt FribourgSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU213T1392 LocationBarneveld MakeRubitec AG TypeVMT 200 No.071080 Year of construction2007 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 190x100 mm Sieve sizesDia:260x130 mm Sieve perforationDia: 5 mm OutletDia: 300 mm Motor4kW,220-240/380-415Volt, 2905rpm(EX) Speed100-1000 U/min MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck Total height0,88 m Weight230kg Floor space1,0x0,60 m ATEX compatiblecheck Extra SpecificationsAtex II3GSieve granulatorsRubitecSieves > Sieve granulatorsBrand > Rubitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

General SKU209W124 LocationBarneveld MakeHaagen & Rinau Typeunimix No.301014/1 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitybruto 260 Ltr. ( netto 200 Ltr.) Vessel sizesDia. 600x1057 mm Dished bottomcheck Dished top sidecheck Manholecheck Dia. 600 mm Top connectionscheck Outletcheck bottom flange DN40 Half coil jacketedcheckVolume 28 Ltr. Max. temperature151°C With turbo stirrercheck magnetic ( agitator is missing) Motor0,18 kW, 220-240 volt, 380-420 volt, 1370 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information Mounted on legscheck Weight430 kg Floorspace1,05x0,90 m Total height1,90 m Extra Specifications- bottom agitator is missing.  ...

General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

diameter: 200 mm height: 90 mm Pole pitch: Radial Polteilung 4-teili mm total power requirement: 0,048 kW Shipping weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ANAYAK VH plus 3000 is a versatile machine center, ideal for complex manufacturing tasks, featuring a HEIDENHAIN iTNC530 CNC controller. Built in 2007, it offers reliable operations with X, Y, Z-axis travels of 2,000 mm, 1,000 mm, and 1,100 mm, respectively, and a precise C-axis rotation of 0.001º. The sturdy worktable measures 1,250 x 1,400 mm and supports up to 5,000 kg. The powerful spindle achieves speeds from 60 to 5,000 rpm, delivering 38 kW through a 2-step gearbox. The machine includes 60-tool capacity, an electronic handwheel, a chip conveyor, and a 4th axis. Located in Europe, its equipped with ISO-50 DIN 69871A tool holders and provides superior cooling through the spindle, ensuring efficient performance for demanding production environments.

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors