tetra 200 used for sale

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1-Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press TOKO 2000 Serial-Nr. 100722 Druckgeschwindigkeit / Production 10.000 Sheets/hr Elektrischer Anschluss / Power supply: 230V / 50Hz / 3,7A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter: 570 mm turning length: 2000 mm control: Sinumerik 805 Siemens swing diameter over face slide: 365 mm main spindle speeds:: 3-2.500 U/min drive of main spindle: 15/19 kW spindle bore: 62 mm spindle head: DIN 55027 No.8 tailstock taper MT: 5 quill stroke: 190 mm pinole diameter: 80 mm feed range - long. and cross: 0,01-50 mm/u total power requirement: 50 KVA weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA KR 200comp Series 2000 robot with traversing axis, 4 meters long Control: KRC2ed05 Number of axes: 7 Max. load capacity: 200 kg Max. working range: 2400 mm Year of Make: 2009 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. 2 weeks commissioning warranty.No further warranty in addition, spare parts are always available from stock. Used goods – normal signs of wear present, yet fully functional. More details and pictures on request. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.

ABB Robot IRB6650 Foundry 200/2.75 S4C+ M2000 , Profibus Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 200 kg Max. working range: 2750 mm Year of Make: 2003 : Robot,Control Scope of Delivery,Cables,Teachpanel,Circuit Diagrams Floppy disk drive for data backup. 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Further questions will be answered by e-mail or phone.  The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.

Complete with intelligent random in feed system. As new condition

- Ultra-Sonic banding machine - Standard with the existing accessories

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

Key data: 160 KW, 200 kVA

We currently offer: Number 41 Cummins generator set Type: 6CT Generator LeRoy Somer Type: LSA 46.1 M5 Power: 200 KVA / 160 KW Year of manufacture generator 1999 / engine 2004 Hz 50 RPM 1500 AVR control R448 IP 21 Hours: 8505 Metrics: L: 3.30m W: 1.25m H: 1.95m Weight: approx. 2000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 160 KW, 200 kVA

We currently offer: Number 48 Generator set Engine Perkins 1300 Power 200 KVA / 160 KW Year of manufacture 1996 IP 22 Hz 50 AVR Control SX460 Hours: 8654 Metrics: L: 5.00m W: 1.35m H: 2.00m Weight: approx. 4 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Feed Pump Centrifugal Pump Manufacturer: KSB Model No.: Etanorm G032-200 20.0 m³/h Head 58 mtr. m. electric motor 8.6kw The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Key data: 1660 mm, 510 mm, 510 mm

Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

current capacity: kVA throat: mm contact pressure capacity: kp volume capacity: Punching capacity: kN punching cross-cut in cmm: stroke: mm weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.

- Strapping machine - Standard version

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 415 mm, 1290 , 980

Machine type: EVK 200 Manufacturer: ERBA Heating element kW: 1.5 Total volume: 200 lt. Description: With the ERBA Granulate Dryer EVK 200, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 200 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Mazak VTC 200 B moving column machining center ::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol - CNC Version: Fusion 640M - Tool Mount: ISO 40 - Spindle Power: 18.5Kw Number of spindle speeds: 12000 - Number of tools: 24 - X-axis travel: 1120mm - Y-axis travel: 510mm - Z-axis travel: 510mm Table dimensions: 1460 x 510mm Guides: roller CNC divider: yes Rotation: Continuous High refrigerant pressure: yes Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3312mm Width: 2850mm Height: 2651mm Weight: 6100Kg

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

carrying capacity: 500 kg weight: 930 kg dimensions: 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

4 Pieces Leveling Elements - Machine Stand AirLoc Maximum static load 4,000 kg Diameter 205 mm Height 54 mm Thread M 24 x 2 Leveling height 25 mm Weight 4.3 kg - 4 pieces total price -

Roller Chassis - Carrier Chassis YALE Payload 2,000 kg Flange width 66 to 220 mm Flange thickness max. 25 mm Smallest curve radius 1.15 m Hand force at nominal load 7 kg Weight approx. 16 kg 16 units in stock - unit price

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

Key data: 300 mm, 570 mm, 5000 1/min

Machine Details Stock-No. 1105-04044 Type of machine CNC Lathe Make MAZAK Type QT NEXUS 200 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex work Technical details turning diameter 350 mm turning length 575 mm Diameter bar 76 mm swing dia. 475 mm control Mazatrol Fusion 640 T X-Axis 190 mm Z-AXIS 570 mm total power requirement 26/22 kW weight of the machine approx. 5 t dimensions of the machine approx. 3.4 x 1.8 x 1.9 m Additional information mazatrol fusion 640 t 2 AXIS tool eyes chip convoyer tailstock

workpiece length: 2000 mm max. workpiece diameter: 400 mm min. workpiece diameter: mm bore spindle turning speed range: 260-1850 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2100 mm grinding width: 600 mm workpiece height: . mm magnetic plate size: 2000x600 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mm turning length: 2000 mm control: Monfort R&D turning diameter over slide: 520 mm spindle hollow: 88 mm total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,2x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.