tetra 200 used for sale

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

Synchronism Panel SICES 2000A 4P

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Workbench, work table, assembly bench -Width: 2000mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Storage: 1 -Number of workbenches: 3 available -Price per piece -Weight: 116kg/pcs

Blustrafos Transformer BLUTRAFOS MANUFACTURER LOT: 45,908 MONTH/YEAR 05/2007 REF 6606,0001 REFR: IN TYPE TT CLASS ISOL. 1.2 KV DEGREE. PROT. IP-21 PHASES 3 TEMPERATURE CLASS: TEMPERATURE B ELEVATION 105 ºC IMPEDANCE AT 115º C 5.5% POWER 15 kVA FREQUENCY 60 HZ DYM1 CONNECTION GROUP MASS: 156 KG VOLTAGE: 380 CURRENT 22.8 A VOLTAGE: 480V CURRENT: 18.04 A

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014

Pressure booster system, centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: KSB Type ETALINE ETL 150-150-200 GGSAV10D301104 Year of construction 2017 Pump wheel Ø 221 mm Q 2x 209 m³/h at 14.5 m 11 kW Control KSB PumpDrive PDRV2__011K00 Dimensions approx. 2500 x 1200 x 1500 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Theleico: 42A 60-1 I 6 -Outer diameter: 200 mm -Width: 6 mm -Inside diameter: 40 mm -Price: per piece -Number: 19 pieces -Weight: 0.4 kg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg

Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Machine in working condition

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Main characteristics: -Designed for automatic dosing, twisting and filling of various mixtures under vacuum; -Funnel 240 liters; -With a rotor head; -Microprocessor control; -Electronic setting of the portion in the range from 5 to 100,000 grams with precise adjustment in steps of 0.1 grams; -The pressure of 35 bar; -Low noise level; -Ability to save about 80 user programs; -Productivity: 3500 ÷ 5000 kg / hour; -Installation power: 7 kW;

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

-Electric control -Cooling as desired - water or air -Stainless details and stainless evaporator -Direct transmission -Easy access to components -ABS Plastic cover -Highly efficient machine without losses -Net dimensions: 920 / 594 / 867 mm. -Receiving hopper with a capacity of 55 kg. - Power supply: 230 / 50 / 1 - Power: 820 watts - Refrigerant: R452A -1 year warranty Category: Ice generators Label: Ice

wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

Machine Details Warehouse number 1105-03676 Machine type CNC lathe Make MAZAK Type SQT 200 Year of construction 1998 Control type CNC Control Mazatrol fusion 640T Storage location FRANCE Country of origin Japan Delivery time ON REQUEST Freight base EX WORK Price Technical details Turning diameter 350 mm Turning length 514 mm Control Mazatrol fusion 640T Circulation diameter 530 mm Spindle nose A2-6, 62mm Spindle bore 51 mm Speed 35-5,000 rpm Turret head (x-fold) 12-fold x-travel 166 mm z-travel 530 mm Total power requirement 18.5 kW Machine weight approx. 5.65 t Information 2-axle, WITH tailstock, WITH SPAENEFOERDER WITH MAZAROL T PLUS

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimension: Ø 38 x 368 mm -Weight: 0.8 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 330 mm -Weight: 0.3 kg/piece

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg