tetra 200 used for sale

Both filling stations are in good condition, little in use.

TOS chuck 200 mm

; Gross weight [kg]: 2586; Engine: Perkins 1106C-TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 420

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

Semt Pielstick Marine Diesel PA4-185 GANZ-MAVAG-SEMT PIELSTICK Possibly sold in parts !

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1005; Registration Number: 4; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140

; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring

; Gross weight [kg]: 2695; Engine: Cummins 6CTAA8.3G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 470

; Gross weight [kg]: 2000; Front tyre size: 155/80 R13; Rear tyre size: 155/80 R13; Wheelbase: 3075; Vehicle outer dimensions [m]: 4,35x1,6x1; Cargo space dimensions [LxBxH]: 3,05x1,5; Max payload [kg]: 1665

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...

The machine is in good technical condition, after prior agreement it is possible to test it. Max swing diameter 660 mm Max turned diameter 660 mm Main spindle: Speed ​​range 35-5000 Main drive power 22/15 kW Max torque 349Nm Spindle bore 76 mm Chuck diameter 210 mm Indexing (C axis) 0.0001 Second spindle: Speed ​​range 35-5000 rpm Power (10 min/constant) 18.5/15 kW Max torque 326 Nm Chuck diameter 210 mm Indexing (C axis) 0.0001 Coolant tank capacity 300 l Machine power 66 kVA Operating voltage 400 V / 50Hz Air pressure 5 bar, 500 l/min Control system MAZATROL Fusion 640 MT Flush cooling: Pump capacity 20 l / min Pump pressure 5 bar Accessories Technical documentation, chip conveyor with cooling, magazine for 20 tools B axis (positioned in 0.001, C axis, Y axis Indexing of the rotation position of the second spindle, Synchronization of the main and second spindles Tool pre-settin ...

An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional

Good working conditions

0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Transport frame wheels defective, see picture -Motor: 2.8 kW -Vibrating bottle: length 360 mm -Hose length: 5 m -Dimensions: 1150/520/H690 mm -Weight: 116 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.