tetr used for sale

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

Capping machine for Tetra Pak line year: 2008

Te Koop: Alfa laval Tetra Pak Type CLIP 8-RH 1999 Bouwjaar Voor meer informatie kunt U bellen of mailen. Email: wh.derikx@gmail.com. Phone. +31 620758459 De nu kopen prijs is excl. 21% btw.

Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .

Merer handle applicator type: CM/HA 60 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

1 fully automatic film multi-shrink system With 2 identical Meurer films individual packaging Shrinkage systems. Shriveled 200 ml packages are placed in 5-er or 2 x 5-rods of the Meurer carton manufacturing and Packaging line fed and in 10 or 20 individual packaging packaged. Achievement: The inflow from the 2 single shrink plants to the Meurer carton packaging machine was 22,500 : 5 = 4,500 pieces of 5-piece individual packaging rods with 200 ml Tetrapack base Packaging Manufacturer Meurer Type: CM/BK 45 T80 Machine No. 861.5005.0199 Year of construction 2006 2 Meurer shrink systems with side-mounted 2 film roll unwinding lines per machine to change a film roll at to be able to carry out ongoing operation a.) 1 fully automatic film multi-shrink system Manufacturer Meurer Type: CM/BK 40 T80 Machine No. 861.004.0199 Year of construction 1999 Inlet height ...

Continuous washing plant make ROLL type RWTF0048-032-02-03Machine -No: KO4241, built in 1996Basket size: 500 x 300 x 200 mmMax. Loading weight: 50 kgSmallest cycle time: 5 minutesMedium: tetrachlorethylene (PER)With- autom. feed- Vacuum still and bypass regeneration systemxa0xa0xa0 (Non-stop 24h / day / 365 days / year)- chips cycloneused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

PRO-Version High Performance vertical packaging machine for tetraeder AND pillow bags INCLUDING 0.5L/10-head-scale. Innovative rotation sealing system for triangle bag. OMRON PLC, interactive 9.7-LCD touch panel display, SCHNEIDER and OMRON electronic components, AIRTAC pneumatics and OMRON PID temperature control, servomotor film pulling, pneumatic sealing unit. - Specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (SS304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: L(50-230)xW(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220V/3.5kW | 6bar, 0.3m?/min | machine dimensions: L1100xW1400xH2220mm | weight: 650kg. Please note that our ne ...

Packaging system for fully automatic dosing, filling and packaging of tea in tetrahedron tea bags. Dosing of the tea by an 8 head linear weigher included in the price. The tea bag packaging machine uses ultrasonic sealing technology to produce traditional tea bags or tetrahedron (pyramid shaped) tea bags. The tee bags are finally packed in an outer bag, 3-side-seal bag or center-seal bag. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | number of weighing heads: 8 | weighing range: 1~10g | accuracy: ?0.1g/bag | tea bag dimension: tetrahedron tea bag: 50-80 mm per edge, traditional tea bag: W(60-80)xL(40-80) mm | suitable film type: nylon, non woven, PET, PLA | film width: 140 mm, 160 mm, 180 mm | outer bag dimensions: W(80-120)xL(90-120) mm | power: 220 V, 1.5 kW | product contact parts from SUS304 | air pressure: 6 bar | dimensions of the packaging system: depe ...

We offer, used: Polyketting Conveyor belts - transport tracks with frequency-controlled / frequency converters on the motors for Tetra Pak beverage cartons 19 frequency-controlled motors More than 100 meters of transport track Subject to prior sale

Overview The palletizer was manufactured by the German company sema in 2001 and until recently was part of a TetraPak filling line at a large German dairy company. The palletizer is now becoming available as the owner is investing in a completely new line. Technical data  Container type: 0.5l + 1.0l TetraPak cartons  7000 single containers per hour Single containers per pack: 10  Formation in the pack: 2x5  Output per hour: 700 packs per hour Palletizing via gantry  Top single lane pack infeed  Number of heads: 1  Type of head: transfer plate  Euro pallet (1200mm x 800mm x 144mm)  Max. Pallet height: 1700mm  15 containers per layer Layers per pallet: 10 (0,5l)/ 5 (1,0l)  Scope of delivery Protective fence, empty pallet magazine, pack and pallet transport

FOR IMMEDIATE SALE: GLASS BOTTLE FILLING LINE FOR STILL AND CARBONATED DRINKS 330ml & 500ml LOCATION: MANCHESTER CAPACITY 16,000 BOTTLES PER HOUR - 330ML This line is in very good condition and is extremely reliable, maintenance procedures in this facility are excellent. Viewing is encouraged. Please Contact Indassol for videos of the line running 330ml ginger beer product Line 9 - 330ml and 500ml Glass Bottle FEATURED ITEMS: • Makro 6 Station Auto Changeover Self Adhesive Labeller (Year 2018) • Krones Variojet Mecafill Multi Bloc (Rinser, Filler, Crowner and Capper) (Year 2002) • Heuft Low/High Level Rejection System (Year 1997) • VM Systems Laning Device (Year 2005) • OCME Altair Box Packer (Year 2015) • Denwell Carbonation Unit (Year 2020) • Tetra Pak (Tetra Plex) Plate Heat Exchanger For Pasteurisation • Process Tanks Ja ...

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Used case packer / tray packer for open trays. Originally, 1 litre tetra packs were cartoned. Manufacturer: M.A.S. Automation AS Year of construction: 06/2006 Cardboard is pre-folded from flat blanks, filled and then folded around the product. Gluing by means of hot melt glue. Infinitely variable adjustment units Product infeed conveyor incomplete. max. 100 products/min Control cabinet: Rittal, V2A Pneumat. Festo Gluer Nordson Geared motors SEW Frame stainless steel Mech .+ electr. Standard parts: Branded 2 emergency stop switches, safety light barriers The facility can be visited in Bremen.

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (25 kW), motor cover, desludge cyclone, CPM-valve for the pressure regulation, control panel (original Tetra Pak) and waterbox (original Tetra Pak), interconnecting piping and service tools for maintenance with pressing tool., Exlcluding:, - Base plate., - Legs., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 25.000 liter per hour, Bowl speed: 4.265 rpm, Motor: 25 kW

Used Hot Fill PET Bottling Line for juice 2013 For sale is a used Hot Fill PET Bottling Line for juice manufactured in 2013 This complete bottling line has a speed of 12000 bottles per hour and is designed to work with PET containers in the 0 50 L format The machines of this line have only 1000 working hours which means that the line is practically new The following machines are included in this complete bottling line Pasteurizer TP Tetra Therm manufactured in 2013 Preform Feed Unit Krones Contifeed RS manufactured in 2013 Blow Molding Machine Krones Contiform H 08 manufactured in 2013 Filling Machine Krones Modulfill VFS manufactured in 2013 Inspector Krones Checmat 731 FM X manufactured in 2013 Cooler Krones Linatherm manufactured in 2013 Labeling Machine Krones Sleevmatic M 1 manufactured in 2013 Shrink Wrapper Krones Shrinkmat 4000 manufactured in 2013 Case Packer Krones Variopac Pro ...

Tray Shrink. It was used for Tetra Pak packages, bt can be used for any other products as well. Max. height 250 mm and max. width 560 mm

5x new discs for an Alfa Laval 518 HGV separator / skimmer. Part number of Tetra Pak: 6-54174180, Bowl disc., Type of Machine: Bowl disc, Number of pieces: 5x, Part number of Tetra Pak: 6-54174180

Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.