tetr pak tba used for sale

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

A like-new mixing vessel with vacuum, cooling and heating function is available. Working volume: 300mm, product chamber operating pressure min./max.: -1bar/0.2bar, max. temperature: 90°C, speed: 600rpm, beaker agitator manufacturer: VISCO JET, heating capacity: 9kW, product outlet height: 465mm, min. passage width: 850mm, overall height: 1800mm, max. width: 1250mm. Documentation available. An on-site inspection is possible.

Compresor system Prematic 388/150 PAKO vollaut. L x W x H: 1.1 x 0.7 x 1.2 m Weight approx. 120 kg Built in 2016 Refrigeration dryer Prematic IDFA The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

ECONO PAK FA-KT and WVE-DR-R + 1-head folding carton display hotmelt (2 adhesive spots) + Angle Sealer + SIMATIC OP7 HMI + Nordson hotmelt 3400V-2GAV4D/R hot melt machine incl. hand glue gun + Handheld control unit + Videojet 2-line for coding + 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm + Built in 2003 + Good used condition WITHOUT checkweigher Folding carton conveyors

Used packer by Techmar type PAK-5.0. New 2006. Packer for kefir. Weight 750 kg. Pressure 8 bar. Power 1.8 kW. Power supply 400 V.

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

: 6 Meter weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: - t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 200 - 280 mm band length: 400 - 500 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 LM m Package 5 x hacksaw / hacksaw machine / untested - partly in need of repair / spare parts carrier - 0278: RUCOCO RBS 280 A / Ø 280mm - automatic machine - 0664: SILISTRA HN 25 M / Ø 250 mm / saw blade 500 mm - 2395: BEHRINGER Super A-275 / Ø 275 / saw blade 450 mm / automatic machine - 3674: BEHRINGER Super 215 PU 2 / Ø 215 / saw blade 400 mm - 5708: KLAEGER / Ø approx. 210 / saw blade 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible.

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

Used cardboard box folding and gluing line made by Pakmar 91, type: SK-2 . New 2012. Parameters of the line for folding and gluing dairy product pallets: - dimensions: 4.40 m x 1.73 m x 1.87 m (length x width x height), - weight: approx. 2,500 kg, - possibility of folding and gluing 2 variants of pallets ensuring the packaging of all cups with a diameter of 95 mm, - capacity 700 – 720 pcs/hour, - gluing method: hot glue (so-called 1-second glue granules), - glue consumption: approx. 2 kg/hour, - power consumption: approx. 7 KW, - compressed air consumption: approx. 45 m³/hour, - setting gluing parameters: on the operator panel, - power supply: 3 x 400V, - number of glued points: 16 including pallet top supports, - machine painted with powder coating – ivory, safety guards – blue, galvanised drive components, - operation by 1–2 persons (2 persons recommended), -  ...

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) Currently available in stock: approx. 10 packages The scope of delivery includes: OSB boards, second choice Item number: OSB10 Overall length: 2,440 mm Total width: 590 mm Thickness: 12 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 216 m² Design: tongue and groove Number of pieces in the package: 150 pieces Base price m²: 9,03 € incl. 19% VAT Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately  ...

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,440 mm Total width: 590 mm Thickness: 18 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 144 m² Design: tongue and groove Number of pieces in the package: 100 pieces Base price m²: 7,56 € Hints: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,500 mm Total width: 625 mm Thickness: 22 mm Panel size in m²: approx. 1.56 m² Total m² / package: approx. 50 m² Design: tongue and groove Number of units in the package: 32 pieces Base price m²: 9,24 € Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Used packaging machine for cottage cheese, type: XPG-40. New: 2018 Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg On an inverter with smooth speed control and a photocell, after a complete overhaul - like new. Almost unused. Packed cottage cheese. No conveyor. Packed.

S. No.: 3011747 Equipment / Additional information: Volt: 230 // Hz: 50 WITH PEDAL Condition: doesn’t work properly, needs service

Turntable diameter: 1500mm, max. load capacity: 1500kg, max. pallet dimensions X/Y: 1200mm/1000mm, max. pallet height: 2100mm, speed: 12rpm, max. film roll width: 500mm. An on site inspection is possible.

Used packaging machine type: XPG-40. New 2017. Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg

Capacity: max 80 packs/min., Glue unit: Nordson Problue 4 hot melt, Power: 3 x 400V, 50Hz, Dimensions: 7500 mm x 1550 mm x 2900 mm

Case Packing Machine, Case Erector, B&E Equipment / I-Pak – Used - : Price from location: only 9.950.-€ (net), if you dismantle yourself! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of Make: 2014 Serial number:14/0559 Each device with 1x with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Net weight: approx. 1,250kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approx. Q4/2026 Location: Hamburg A video of the machine is available!

2x Case Packing Machine, Case Erector, B&E Equipment / I-Pak – Used - : Price per device ex location: only 9.950.-€ (net), if you dismantle it yourself! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of Make: 2014 Serial Number: 14/0558 and 14/0557 Each device with 1x with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Net weight: approx. 1,500kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approx. Q4/2026 Location: Hamburg A video of the machine is available!

SEMI AUTOMATIC STRETCH WRAPPING MACHINE WITH MECHANICAL STRETCH BRAND : SIAT MODEL : PAKLET F-1EM COUNTRY OF ORIGIN : ITALY SPECIFICATION : - MAX PALLET WEIGHT : 2000 KG MAX PALLET HEIGHT : 2100 MM MACHINE VOLTAGE : 240V / 50HZ / 1 PHASE PLATFORM DIAMETER : 1500MM TURNABLE HEIGHT : 75MM Please contact: adila_atopglove.com.my Located at F13

Mini Pak'r Air Cushion Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Mini Pak’r Air Cushion Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Mini Pak’r Air Cushion Machine Price: 500 EUR Download PDF Mini Pak’r Air Cushion Machine The machine creates air-inflated fillings from the foil sleeve. 230V power supply Weight about 6 kg. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive information from us about product news, promotions and ...

Used Used case Packer Sacmi Pakim Robotik: Year: 2006 Condition: As Is Used case Packer Sacmi Pakim Robotik Year: 2006 Speed: 13.000 bph (36 boxes/minute) Model: robotik Adjustable head Bottle formats: Minimum 0.375 l Max 1.5 l Box formats: Box for 6 bottles. Box for 12 bottles. Safety protections Code: JL 255 More details: https://bottlingscout.com

Technical Specifications & Performance Data The Used Filling Machine Elopak PURE PAK PS 20 is an efficient solution for industrial packaging needs, particularly in the beverage production sector. Built in 1998, this machine boasts a production speed of 2000 bottles per hour (bph), supporting a range of container types, specifically designed for Brik formats. Model: PURE PAK PS 20 Production Speed: 2000 bph Bottle Formats: 0.06 L, 0.25 L, 0.50 L Container Type: Brik Electrical Specifications: 380V, 50Hz, 28A Advanced Automation & Control Systems This second hand filling machine incorporates advanced control systems that simplify the operation of the equipment. With user-friendly control panels, the machine ensures efficient performance and includes comprehensive safety features to safeguard operators during use. Control Panel: Accessible and user-friendly Automation Level: High, enhancing ...

Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & C ...

🧣📦 Last chance for a smart site upgrade: The Doka cavity wall bracket 60 is now available in a clearance bundle †by pallet , fairly priced and ready to ship ! 💥 Whether you need a pouring platform , edge protection solution or system extension †this bracket is a perfect match for anyone using the Doka Xsafe XP system . Compatible. Durable. Cost-effective. 🔎 Why this deal makes sense: ✅ Compatible with Xsafe XP †a smart add-on for your edge protection system ✅ Versatile use †for pouring platforms and barriers on precast hollow-wall elements ✅ Galvanised finish †durable, resilient and immediately ready for use ✅ Sold by full pallet (10 pcs) †condition-based price tiers available ✅ Immediate availability †no waiting, no quote ping-pong ✅ Clearance pricing †sma ...

2015 Tetra pak tetra pak TT MIDI 250ml, 330 ml, 500 ml TT BASE 500ml, 750 ml, 1000 ml. Running hours-31151. We operated by BASE from 2013.03…2018.11 Running hours-27145. We operated by MIDI from 2015.08…2018.11

Auction-ID: A1-41278-503

Auction-ID: A1-47380-138

Elopaks E-PS120UC is a carton packaging solution commonly used for beverages. Here are some key features and benefits:, - Sustainable Packaging: Elopak focuses on sustainability, and their products often feature renewable resources and recyclability., - Functionality: The E-PS120UC is designed for easy pouring, which is essential for consumer convenience., - Preservation of Quality: This type of packaging helps to extend the shelf life of beverages, ensuring that the taste and quality are maintained., - Versatility: It can be used for a wide range of products, including juices, milk, and other liquid foods., - Customization Options: Elopak typically offers branding and design options for their cartons, allowing businesses to create a unique product presentation., Elopak® E-PS120UC, Please also check the pictures there is one of the red label which also states the machine serial number,, ...

One set includes two pieces of equipment. Auction-ID: A7-48351-33

One set includes two pieces of equipment. Auction-ID: A7-48351-39

One set includes two pieces of equipment. Auction-ID: A7-48351-41

One set includes two pieces of equipment. Auction-ID: A7-48351-37

One set includes two pieces of equipment. Auction-ID: A7-48351-36

One set includes two pieces of equipment. Auction-ID: A7-48351-40

One set includes two pieces of equipment. Auction-ID: A7-48351-32

One set includes two pieces of equipment. Auction-ID: A7-48351-35

One set includes two pieces of equipment. Auction-ID: A7-48351-34