testing used for sale

Medical sterilizer for decontamination of various materials including liquids in open containers. Built between two rooms in two walls. Left service. The internal dimensions of the camera are 672 x 672 x 1000 (W x H x D). The volume of the camera is 452l. The P 3203 software combination is designed to sterilize dishes, textiles, rubber plugs, filters and liquids. All processes in this combination are designed to retain and disinfect wastewater from the sterilizer. The parameters for each process can be adjusted and stored in memory for the respective program. Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit. Russified display. Avanti control panel (8.4 color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - on the loading side (SPF flange). Set of pipelines for connecting  ...

Medical sterilizer For decontamination of various materials, including liquids in sealed bottles. It is built between two rooms in one wall. Cabinet and through execution. The internal dimensions of the camera are 672 x 672 x 600 (W x H x D). The volume of the camera is 300 liters. The software combination L 3203 is designed to sterilize dishes, textiles, rubber plugs, filters and liquids in closed or ventilated rigid containers. All processes in this combination are designed to retain and disinfect wastewater from the sterilizer. The parameters for each process can be adjusted and stored in memory for the respective program. Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit. Russified display. Avanti control panel (8.4 color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - o ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 140 mm   wall thickness min.: 1 mm   wall thickness max.: 14 mm   length min.: 4500 mm   lenght max.: 12500 mm Exclusions from supply (even when visible on photos): The equipment is supplied without test equipment and electronics, in particular without: - LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM - Replacement demagnetization Nukem- Replacement inspection electronics

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 40 mm   external diameter max.: 150 mm   length min.: 260 mm   lenght max.: 1500 mm ELECTRICAL SPECIFICATIONS   total power consumption: 155 kW   mains power supply: 280 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007 Exclusions from supply (even if visible on photos)- without chip breaker - without laser marking system

X1-travel: 1280mm, x2-travel: 960mm, z-travel: 180mm, spindle mount: HS 32, max. rotational speed: 6000/min, length: 4500mm, width: 5000mm, operational hours: ca. 15,000h, suitable for turning, knurling, thread cutting, smoothing, eddy current testing, with two rotary axes, feed for shafts via step conveyor and feed-through chuck Ø42, discharge belt with sorting, emulsion preparation, chip discharge belt and double extraction with separator, was maintained regularly.

Line includes (1) Material Dosing Iveca (2) Extruder Windmöller & Hölscher (3) Blow Head Windmöller & Hölscher (4) Die Windmöller & Hölscher, diameter: 200mm (5) Film Cooling Windmöller & Hölscher (6) Calibration Basket Windmöller & Hölsche (7) Flat-Lay Unit Windmöller & Hölscher (8) Haul-Off Windmöller & Hölscher (9) Winder Svend Knudsen (10) steel construction, operational hours counter: ca. 7000h, with documentation, the line was only used for testing purposes.

Machine: Bielomatik TAL 100 Year 2001 - Separation and dispensing of RFID material - All material handling with web tension control -Web guide control via ultrasound and 2x via camera module -4 inline RFID readers (checking/marking defective inlays) - Web monitoring: Leuze camera system (3 cameras) -Folding device (DistaFerr) - Transfer module -2 inkjet printers Imaje 9020 (labeling and marking) - 2 controlled hole punches (devaluation, passepartout punching) - 2 longitudinal cutting modules with 2 knives each -3 hot melt heads for tickets - Ticket display after punch - Adjustable counter pressure cylinder -Only solid cylinder used - Rotary punch Register control yes Longitudinal cutting web edge control Material width [mm] min 20 max 120 Punching width [mm] min 10 max 120 Feed [mm] min 5 max 609.6 Unwinding 0 [mm] 600 Grid winding 0 [mm] 600 Winding 0 [mm] 600 R ...

Description: laser source: fiber laser class: class IV wavelength: 1 062-1 066 nm max. average output power: 500W nominal pulse energy: 50-100 mJ (depending on mode) nominal pulse length: 30-100 ns (depending on mode) frequency: 5-50 kHz max. power input: 4,5 kW focusing optics: 254 mm (100, 160, 420 mm) power chain length: 9,4 m power supply: 3×400 V, 16 A, PE-N, standard five-pin cooling: distilled water, 5 l machine in good technical condition, after agreement possibility of testing weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,400 x 700 mm

grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole  ...

turning diameter over bed:280 mm turning diameter over slide rest:160 mm turning length:600 mm upper head travel:100 mm radial face slide travel:150 mm bed width:180 mm spindle head:DIN 55022 Gr. 4 spindle diameter in front bearing:85 mm spindle bore:39 mm taper bore:d. Hauptspindel MK 5 power capacity:2,4 kW turning speed range:48 - 2500 U/min feeds - longitudinal:0,019 - 1,92 mm/U feeds - cross:0,0095 - 0,960 mm/U threading:27metr.Steig. 0,25-12mm diameter of quill:40 mm quill stroke:85 mm Colour:6011/grün RAL voltage:380 / 50 V / Hz weight of the machine ca.:660 kg dimensions of the machine ca.:1580x670x1200 mm Nice machine from first hand incl. Collet clamping System plus 1 pcs Collet incl. Multifix toolhoder system plus 1 toolholder machine under power for testing more accessories on regrest

internal diameter:250 mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:250 (selbstschließend), 1 Satz harte Backen, 1 Satz weiche Backen, 1 Satz Innen mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:RPM 28.000, diam. 60 mm. Min. diam. cap. 25 mm. x Bohrung 50 mm, Max. diam. cap. 100 mm. x Bohrung 115 mm . internal grinding spindle: ...

internal diameter:300 mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:350 (selbst zentrierend) mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:auf Anfrage internal grinding spindle:auf Anfrage fixed steady rests:10-100 mm, 100-170 mm PERFORMANCE AND PRECISION DEGREE Robbi grinding machines are according to the international precision normes ...