test bench used for sale

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

Drilling machine, bench drill, pillar drill, column drill -Handover: in its current condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle mount: MK3 -Travel distance: 500 mm -Protrusion: 300 mm -Columns: Ø 110 mm -Spindle stroke: 150 mm -Translation about: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg

bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm -Voltage: 380 V -Dimensions: 580/590/H730 mm -Weight: 60 kg

High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg

Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm -Travel distance: 440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

2x2x2m 650 C and 1200 C PLC

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

Benchtop centrifuge ROTOFIX 32 Hettich laboratory In excellent working condition Reference : 1205 Technical specifications: Voltage: 208 - 240 V 1 ~ Frequency: 50 - 60 Hz Power: 160 W Maximum capacity: With swivel rotor: 4 x 100 g Max. Speed: 6,000 min-1 Dimensions (H x W x D): 257 x 366 x 430 mm Weight: approx. 23 kg With oscillating free rotor 1624 With 2 HETTICH 1369 pods for 4 tubes of 6/7ml Ø12 x 82/100 mm With 2 HETTICH 1346 pods for 2 x 20ml tubes Max. Speed: 4000 rpm Year of Manufacture: 2000

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/min turning speeds: 1) 0,7 - 5,6 U/min turning speeds: 2) 2,8 - 22,4 U/min turning speeds: 2,1 - 56 U/min tool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1.320 mm turning length: 5000 mm swing diameter: 1250 mm workpiece weight: 14 t turning diameter over slide: 900 - 950 mm total power requirement: 45 kW weight of the machine ca.: 18 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

Lard lathe Turning length approx. 2000 mm Turning diameter approx. 1100 mm Center height approx. 450 mm without machine table Basic thread M 55 with M 33 adapter for standard chuck with 5 face plates of 100 – 600 mm diameter was used to turn molds for a foundry. Weight approx. 2800 kg

Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

Harrison 150mm Metric (L6) Lathe 3-speed 380V motor runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. Spindle speeds adjustable from 45 to 1000 RPM. Spindle coupling for changing speed while the motor is running. Automatic feed in longitudinal and cross directions. Tapping threads is possible and easy thanks to the Norton gearbox. Removable machine bed for turning larger diameter workpieces. MT3 tailstock taper. Center distance: 600 mm Center height: 170 mm Spindle bore: 37 mm Dimensions: 170 x 70 x 130 cm Made in Great Britain. Includes accessories as shown in the pictures!

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Manufacturer: TOS Model No.: H 80 Condition: Used Stock number: 9338 Worktop length: 1120 mm Worktop width: 900 mm Spindle diameter: 80 mm

Manufacturer: TOS Model: W 100 Condition: Used Stock number: 9339 Worktop length: 1250 mm Worktop width: 1250 mm X-axis moves: 1600 mm Y-axis moves: 1120 mm Z-axis moves: 1250 mm Spindle diameter: 100 mm

bore capacity in steel (diameter): 15 mm throat: 215 mm bore stroke: mm turning speeds: 200 - 3600 U/min : 350 x 300 mm total power requirement: 1,0 kW / Volt tool taper: MK 2 weight of the machine ca.: 320 Kg dimensions: 0,8 x 0,6 x 1,9 mm Bench drill - Base unit with drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 36708 Speed: from 280 to 3500 rpm Drilling depth: up to 120 mm Table dimensions: 430 x 340 mm with vise attached, jaw width: 100 mm and a batch of reamers Reference: Lebtig - Lot 81 Auction-ID: A7-49056-236

Machine number: 24100882 Speed: from 480 to 2800 rpm Table dimensions: 160 x 170 mm Reference: Lebendigig - Lot 35 Auction-ID: A7-49056-217

Spindle speed: from 560 to 3500 rpm Drilling depth: up to 120 mm Table dimensions: 430 x 330 mm with vise attached, jaw width: 100 mm Reference: Lebtig - Lot 80 Auction-ID: A7-49056-235

Machine number: 24100881 Speed: from 730 to 2800 rpm Table dimensions: 160 x 170 mm Reference: Lebtig - Lot 34 Auction-ID: A7-49056-216

Operating voltage: 220/380 V Frequency: 50 Hz Connection: 500 W Grinding wheel diameter: 200 mm Width: 25 mm Auction-ID: A7-49089-408

Serial number: 0703039.001 Operating voltage: 230/400 V Connection: 0.9 kW Rated current: 3.6/2.1 Speed: 2900 rpm Grinding wheel dimensions: 200 x 32 x 51 mm Auction-ID: A7-49089-477

consisting of two drills Speed: from 70 to 2800 rpm Table dimensions: 750 x 230 mm with one groove Reference: Option - Lot 32 Auction-ID: A7-49056-79

Benchtop centrifuge cooled Manufacturer: Hettich Type Rotanta 460 R Rated voltage 220-240 V 1 Connected load 1,800 VA Max. capacity 4x 1,000 ml Weight approx. 141 Kg Temperature control, infinitely variable from -20 to +40 °C Including 6-fold angle rotor Dimensions: 770x706x456 mm, weight 141 kg Documents available

Auction-ID: A1-48474-95

: neu : 2025 : 030138 : prompt, Zwischenverkauf v : Deutschland : 3444.77 € : 1 : 13 mm : MK 2 : 220 mm : 40 - 4000 U/min : M 10 (steigungsabhängig) : 520 mm : 400 mm : 850 mm : 62 kg : 60 mm : 85 - 370 mm : 420 mm : 300 x 250 mm : 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500) The dat ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 € : 18 mm : MK 2 : 240 mm : 30 - 3000 U/min : M12 : 355 mm : 705 mm : 1065 mm : 170 kg : 100 mm : 155 - 415 mm : 155 - 550 mm : 340 x 280 mm : 82 mm Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice &, keyless chuck) The data for this ad wa ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2792.28 € : 10 mm : B 16 : 220 mm : 250 - 3000 U/min : 0,45 kW : 320 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTe ...

pressure: 720 t stroke: 15 mm total power requirement: 3 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 1300 x 1800 x 2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 165 kg Drilling capacity in steel: 20 mm Throat depth: 210 mm Spindle stroke: 100 mm (130 mm on some versions) Spindle taper: Morse taper MT 2 Max. distance from spindle to table: 450 mm Vertical head adjustment: 250 mm (350 mm on some older versions) Spindle speed range: 355 – 2,800 rpm Number of spindle speeds: 4 Table size: 340 × 280 mm Total power requirement: 1.1 kW Machine weight: approx. 163–165 kg Dimensions (L × W × H): approx. 620 × 480 × 1,280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 450 mm turning length: 1500 mm centre height: 225 mm Swing diameter: 450 mm Turning length: 1,500 mm Centre height: 225 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 1000 mm swing diameter over bed slide: 400 mm turning diameter over slide: 225 mm bed width: 433 mm spindle bore: 56 mm total power requirement: 7,4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,5 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: Saw blade diameter: 550 mm Cutting width: 750 mm Cutting depth: 175 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: Motor, each: 4.5 kW Spindle diameter: 30 mm Spindle centre distance: 600 mm Speed settings: 3000/4000/5000/6000/8000/10000 D-89440 Lutzingen, Tel. 09074 1371, Fax: 09074 5516, April 2015, asking price €500 D-89440 Lutzingen, Tel. 09074 1371, Fax: 09074 5516, May 2015, cost price €1,000 Condition: Gebraucht Location: Tauberbischofsheim, Germany

: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 93 kg Standard equipment: 5 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Thre ...

: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 93 kg Standard equipment: 5 TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle  ...