ter hart used for sale

Manufacturer: FieldComm Group Model: HCF-Tool-35 (part of the HART Physical Layer Test Kit) Type: HART FSK Physical Layer Test Interface (Modem) Function: Specifically designed to test the conformity of HART master and slave devices to the Physical Layer specification Used as a PC interface for all physical layer testing Technical features: RS-232 interface to PC Output signal amplitude adjustable (via potentiometer without stop) Output voltage: typ. 60 mV to max. 1.6 V over 250 Ohm load Compatible with desktop and notebook PCs (4-6 V output voltage recommended) Supports XMTR-MULTIVARIABLE software for simulation and testing Auction-ID: A1-45208-67

Manufacturer: Pepperl+Fuchs Model: HM-MT-USB-PWRX-010031P (current replacement: HM-PF-USB-PWRX-010031P) Type: USB HART modem with PowerXpress Function: Interface for commissioning, calibration and data acquisition of HART field devices Supplies power to all 2-wire HART devices (up to 40 mA) USB powered, no external power supply required Technical data: Input current: 30 mA (modem only), 255 mA (with device current) Output: 24 VDC at 40 mA Interface: USB 2.0 Galvanic isolation: 500 V DC Operating temperature: -20 ... +50 °C Degree of protection: IP20 Housing: Polycarbonate Dimensions: 96 × 47 × 24 mm Cable length: 1.8 m with test clamps [pepperl-fuchs.com], [pepperl-fuchs.com] Compatibility: Windows 7, 10, 11 (32/64 bit) Special features: Compact, robust for industrial use Mode selection: \"Powered Modem\" or \"Modem Only\" Auction-ID: A1-45208-55

Manufacturer: Pepperl+Fuchs Model: HM-MT-USB-PWRX-010031P (current replacement: HM-PF-USB-PWRX-010031P) Type: USB HART modem with PowerXpress Function: Interface for commissioning, calibration and data acquisition of HART field devices Supplies power to all 2-wire HART devices (up to 40 mA) USB powered, no external power supply required Technical data: Input current: 30 mA (modem only), 255 mA (with device current) Output: 24 VDC at 40 mA Interface: USB 2.0 Galvanic isolation: 500 V DC Operating temperature: -20 ... +50 °C Degree of protection: IP20 Housing: Polycarbonate Dimensions: 96 × 47 × 24 mm Cable length: 1.8 m with test clamps [pepperl-fuchs.com], [pepperl-fuchs.com] Compatibility: Windows 7, 10, 11 (32/64 bit) Special features: Compact, robust for industrial use Mode selection: \"Powered Modem\" or \"Modem Only\" Auction-ID: A1-45208-53

Manufacturer: Pepperl+Fuchs Model: HM-MT-USB-PWRX-010031P (current replacement: HM-PF-USB-PWRX-010031P) Type: USB HART modem with PowerXpress Function: Interface for commissioning, calibration and data acquisition of HART field devices Supplies power to all 2-wire HART devices (up to 40 mA) USB powered, no external power supply required Technical data: Input current: 30 mA (modem only), 255 mA (with device current) Output: 24 VDC at 40 mA Interface: USB 2.0 Galvanic isolation: 500 V DC Operating temperature: -20 ... +50 °C Degree of protection: IP20 Housing: Polycarbonate Dimensions: 96 × 47 × 24 mm Cable length: 1.8 m with test clamps [pepperl-fuchs.com], [pepperl-fuchs.com] Compatibility: Windows 7, 10, 11 (32/64 bit) Special features: Compact, robust for industrial use Mode selection: \"Powered Modem\" or \"Modem Only\" Auction-ID: A1-45208-90

Manufacturer: FieldComm Group Model: HCF-Tool-35 (part of the HART Physical Layer Test Kit) Type: HART FSK Physical Layer Test Interface (Modem) Function: Specifically designed to test the conformity of HART master and slave devices to the Physical Layer specification Used as a PC interface for all physical layer testing Technical features: RS-232 interface to PC Output signal amplitude adjustable (via potentiometer without stop) Output voltage: typ. 60 mV to max. 1.6 V over 250 Ohm load Compatible with desktop and notebook PCs (4-6 V output voltage recommended) Supports XMTR-MULTIVARIABLE software for simulation and testing Auction-ID: A1-45208-68

Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used Auction-ID: A1-44765-229

Hartford F1 Series LG-1000 CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Hartford Model: F1 Series LG-1000 Year of manufacture: 2008 X-axis travel: 1000 mm Y-axis travel: 510 mm Z-axis travel: 630 mm Speed range: up to 10,000 rpm Workpiece weight max.: 700 kg Motor power: 11 kW Approx. machine weight: 7000 kg Approx. machine dimensions (L x W x H): 2850 x 2250 x 2750 mm Table surface: 1150 x 510 mm Fast crossing: 30/30/24 mm/min Additional information: For transportation dimensions are mm 2850 x 2250 x 2750 + 3 pallets Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-4

Used Conveyors as needed and at your Layout with Motors, Curves, etc.

Valve terminal, valve assembly, 50E-F14GDQSERYKJUXUXIX….., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is € 4.450 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 44 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece linking block, CPX-GE-EV-S-VL, 8022170, 3) 7 pieces of in ...

Valve terminal, valve assembly, 50E-F14GDQSUXYKJNY…., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.680 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJ-D-UL1-EX1E, 32P-SGK-R-MASVAIIIU-7KL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 3 pieces of interlinki ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJ-D-UL1-EX1E, Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.250 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 2 p ...

GROVE RT755 rough terrain crane was built in 1980 in Germany by GROVE MANUFACTURING COMPANY. A vehicle designed for lifting and transporting heavy loads performs perfectly in any , even the most unfavourable terrain. The three-section trapezoidal main boom is distinguished by both an impressive lifting capacity of 50 tonnes and a maximum height of up to 34 metres. All steering wheels, on the other hand, give great off-road ability, ensuring efficient movement over a wide variety of terrain, over any distance. The GROVE RT 755 rough terrain crane on offer has a current UDT inspection valid until December 2025. The total weight of the vehicle is 30844 kg. Technical specifications of the GROVE RT755 mobile crane - maximum lifting capacity: 50 t - maximum boom height: 34,14 m - engine: CUMMINS 173 HP - engine type: diesel - 4×4 drive - motor-hours: 4500 h - dimensions (L x W x  ...

Off-road crawler articulated work platform off-road platform caterpillar platform Can also be moved when lifted ideal for tree and hedge trimming, fruit tree management, hop garden cultivation assembly work indoors and outdoors. Due to its low dead weight, the machine can also be transported with a car transport trailer. FRONTEQ Type: FBZ-6T Payload: 230 kg Platform dimensions: 1.15 x 0.75 m Platform rotatable: 80° / 80° Transport dimensions 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2700 Kg Working height: 8.4 m Platform height: 6.4 m max. radius approx. 4.3 m Climbing ability up to: 45% Maximum working inclination: 3° / 3° Overload Shutdown: Proportional hydraulic drive Battery drive 2 x 4 pcs 6 V / 230 Ah Integrated charger 24 V/ 60 A German instruction manual included 2-year manufacturer's warranty ...

Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, bus coupler, logic bus terminal -Manufacturer: Beckhoff, TwinSAFE Logic bus terminal -Type: KL 6904 -Nominal voltage: 24 V DC -Dimensions: 24/68/H100 mm -Weight: 0.2 kg

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, ET 200S Compact -Type: 6ES7 193-4DL00-0AA0 TM-C120C -Dimensions: 120/170/H45 mm -Weight: 0.5 kg

Control cabinet and distribution board, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 243 -Quantity: 2 pieces available -Price: per piece -Minimum purchase: complete -Dimensions: 200/80/H110 mm -Weight: 0.5 kg/piece

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

PCE Color LCD Touch Terminal

Control cabinet and distributor construction, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 240 -Number: 9 pieces available -Price: per piece -Dimensions: 200/55/H110 mm -Weight: 0.4 kg/piece

Interbus-ST bus terminal -Connection: 24 V DC -with 8-pin: MINI-COMBICON connector -Consists of: Terminal part with screw connection and module electronics -Dimensions: 44/114/H112 mm -Weight: 0.2 kg

Interbus-ST bus terminal -Connection: 24 V DC -9 pin -Consists of: Terminal part with screw connection and module electronics

Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Fieldbus coupler type: 750-333 -Bus terminals: 19 (14x750-403/4x 750-504/1x750-600) -Dimensions: 280/100/H65 mm -Weight: 1 kg

A large valve terminal from Festo is offered here. It consists of the following parts: - VABE-S6-10L-C-M1 (543414) - VABF-S5-10-P1A6-G12 (676822) - 3 x VABV-S4-1S-G14-2T2 (668449) - 2 x VABV-S4-2S-G18-2T2 (668434) - VABE-S6-1R-G12 (677887) - 6 x VSVA-B-B52-ZD-A1-1T2L-SA (SA235697B) with sockets - 6 x VABF-S4-1-R1C2-C-6 (540152) with pressure gauge. But it still works without any problems) - 3 x VSVA-B-B52-ZD-A2-1T2L-SA (SA235697D) - VABB-S4-2-WT (539213) In addition, 4 large silencers and various push-in fittings. Of course, the connecting cable has to be re-laid in the VABE-S6-10L-C-M1.

Bus Terminal SIEMENS SINEC L2 ( SINECL2 ) RS485 6GK1 500-0AB00 approx. 3 m Cable Dimensions: 135 x 50 x 50 mm

Terminal box, aluminum housing, housing systems, Klippon -Type: AB812027 -Size: 95/83/H35 mm -Price: per piece -Number: 4x available -Weight: 0.3 kg

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CB30-OAAO -Cardboard dimensions: 140/45/H25 mm -Weight: 0.1 kg

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CC30-OAAO -Quantity: 4 modules available -Price: per piece -Dimensions: 140/40/H25 mm -Weight: 0.1 kg/pc.

Electronic Module, Terminal Block FANUC GE I/O BASE BARRIER STYLE TERMINAL IC670CHS001E New ! Dimensions: 175 x 95 x 60 mm

Terminal box BBC GHG 782 0103 VO 380 V AC 440 V DC IP54 explosion-proof ! New ! Dimensions: 150 x 100 x 80 mm

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CG30-OAAO -Cardboard dimensions: 135/45/H40 mm -Weight: 0.1 kg

PLC controller, connection module for digital electronic modules, terminal module, terminal block -Manufacturer: Siemens, Terminal Module -Type: 6ES7 193-OCB30-OXAO -Number: 3 modules available -Price: per piece -Dimensions: 235/130/H55 mm -Weight: 0.4 kg/pc.

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CA40-OAAO -Number: 24 modules available -Price per piece -Minimum order quantity: 5 pcs -Dimensions: 155/15/H45 mm -Weight: 0.1 kg/pc.

Valve terminal with fieldbus connection FESTO CPV 14-GE-MP4 CPV-14-VI 4 valves HN02 123622 18210 161362 -0.9 - 10 bar Dimensions: 140 x 135 x 105 mm

Valve terminal with fieldbus connection FESTO CPV 14-GE-FB-4 CPV-14-VI 2 valves H902 123788 18210 161362 -0.9 - 10 bar Dimensions: 130 x 125 x 95 mm

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CA30-OAAO -Number: 15 modules available -Price: per piece -Minimum order quantity: 5 pieces -Dimensions: 130/15/H45 mm -Weight: 0.1 kg/pc.

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 2 pieces -Type: 6ES7 193-4CA20-OAAO -Price/delivery: complete -Dimensions each: 130/15/H45 mm -Weight: 0.1 kg/pc.

Valve terminal with fieldbus connection FESTO CPV 10-GE-MP-6 CPV-10-VI2549 5 valves L902 18254 18200 161416 -0.9 - 10 bar Dimensions: 155 x 140 x 80 mm

Valve terminal with fieldbus connection FESTO CPV 14-GE-MP-8 CPV-14-VI 8 valves HN02 123624 18210 161362 -0.9 - 10 bar Dimensions: 185 x 140 x 95 mm

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 2 pieces -Type: 6ES7 193-4CC20-OAAO -Price/delivery: complete -Dimensions each: 130/15/H45 mm -Weight: 0.1 kg/pc.

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 2 pieces -Type: 6ES7 193-4CD30-OAAO -Price/Sale: complete -Dimensions each: 130/15/H45 mm -Weight: 0.1 kg/pc.

Valve terminal with fieldbus connection FESTO CPV 14-GE-FB-8 CPV-14-VI 7 Valves HN02 123790 18210 161362 -0.9 - 10 bar Dimensions: 185 x 125 x 95 mm

Valve terminal REXROTH R 145 00 176 3 Valves 0 820 055 101 1 Valve 0 820 055 501 10 bar Dimensions: 150 x 150 x 120 mm

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 2 pieces -Type: 6ES7 193-4CE10-OAAO -Dimensions each: 130/15/H45 mm -Weight: 0.1 kg

Valve terminal FESTO 8x JMEH-5/2-1/8-P 1x PRS-ME-1/8-8 30615 33411 1.5 - 8 bar Dimensions: 220 x 200 x 100 mm

Valve terminal FESTO 2x MFH-5/3-G-1/8-B 1x PRS-1/8-2-BB 30484 30542 3 - 10 bar Dimensions: 230 x 150 x 115 mm

Valve terminal FESTO 2x 10 410 JMFH-5-1 / 4 1x 119 0 2 PRS-1/8-6 B 1.5 - 8 bar used, tested !' Dimensions: 320 x 200 x 105 mm

Valve terminal FESTO 5x 10 410 JMFH-5-1 / 4 1x 119 0 2 PRS-1/8-6 B 1.5 - 8 bar Dimensions: 320 x 200 x 105 mm

Valve terminal FESTO 2x 10 410 JMFH-5-1 / 4 1x 119 0 2 PRS-1/8-6 B 1.5 - 8 bar Dimensions: 320 x 200 x 105 mm

Computer cabinet, control cabinet, terminal cabinet, terminal enclosure, control panel floor-standing enclosure, server cabinet, switch cabinet, system cabinet -Terminal cabinet: System cabinet housing stainless steel -Width: 595 mm -Depth: 500 mm -Height: 2000 mm -Weight: approx. 90 kg