tension used for sale

Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

grinding diameter max.:10 - 175 mm regulating wheel width:610 mm max. width of grinding wheel:610 mm Maximum opening between new wheels:250 Recommended working range:10 - 175 mm Maximum workpiece lenght for infeed grinding - normal wheels:605 mm Maximum workpiece lenght for infeed grinding - recessed wheels:695 mm grinding wheel diameter:610 mm grinding wheel dia. (used wheel):380 mm grinding wheel width:610 mm Maximum witdth of receddes wheel:700 mm grinding wheel hole diameter:304,8 mm Peripheral speed:63 m/sec. dia. of control wheel:330 mm Outer diameter of worn wheel:255 mm regulating wheel width:610 mm Maximum witdth of receddes wheel:660 mm regulated disc boring:203 mm Speed of regulating wheel:10 - 850 1/min. control wheel inclined adjustable:5 Grad weight of the machine ca.:12 t dimensions of the machine ca.:4,8 x 2,1 x 1,1 m Centerless wide-wheel grinding machine for infeed oper ...

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

throat:580 mm bore stroke:650 mm X-axis :3300 mm y-axis:550 mm z-axis:650 mm Drill head RPM:bis 3800 U/min Drive x + y + z axis:Servomotor Rapid traverse x axis:20 m/min Rapid traverse y axis:10 m/min Rapid traverse z axis:10 m/min Distance table top - bottom Chuck:700 mm Table width:560 mm T-slots:14 Threaded drill up to:M4-M20 Tolerance x axis::0,1 mm Tolerance of y and z axis::0,06 mm total power requirement:4 kW weight of the machine ca.:ca. 4 t description of the Company Bauer: Drilling rig driving stand principle the table stops, the drill head moves. Simple operation, CNC knowledge is not required. Data import DXF and CSV. Robust design with proven engineering components and a clearer structure of the machine guarantee high availability and long service life. All this for a price which paid off faster than expected. In the development of the control system, special attention was g ...

Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Work container dimensions X/Y/Z: 1050mm/765mm/560mm, size: 700mm/480mm, max. workpiece dimensions X/Y/Z: 900mm/680mm/250mm, max. workpiece weight: 400kg. Wire feed pressure: 6bar-9bar, min. flow rate: 100l/min, hose outer diameter: 8mm. Travel X/Y/Z/U/V: 350mm/250mm/250mm/90mm/90mm, max. taper angle at 80mm height: +/- 25°, min. resolution X/Y/Z/U/V: 0.1μm/0.1μm/0.125μm/0.125μm/0.125μm/0.125μm. Dielectric unit: Type: deionized water, clean tank capacity: 200l, dirty tank capacity: 600l, filter cartridge precision: 50μm. Standard wire guide diameter: 0.15mm/0.20mm/0.25mm/0.30mm, max. wire weight: 8kg, max. wire tension: 30N, max. wire speed: 330mm/s. Documentation available.

technical data: Make: Jansen Type: Jansen - Saw clamp Types No.: HS-NR. 11102 Purpose: suitable for OSS/E/I75 Dimensions: Tensioner 733 mm long

We sell 1 piece rubber chain! Size 180x72x37 (width, division, links) We need the following information to process your request: Machinery - Type Manufacturer Built The exact delivery address Telephone number and e-mail address Rubber chain for mini excavators in any size! Delivery from stock: 1 day, after receipt of payment Various rubber chains in stock, different sizes price on request! For more information call the mobile number 0171/8964905! Profile may change depending on batch and chain size! Shipping costs included, within Germany! Rubber chains are pre-tensioned during production (vulcanization). No retightening necessary on your excavator. The rubber chains have an endless winding. These rubber chains are used by well-known companies for the initial equipment of the mini excavator.

We sell 1 piece rubber chain! Size 300x52,5Wx78 (width, division, links) We need the following information to process your request: Machinery - Type Manufacturer Built The exact delivery address Telephone number and e-mail address Rubber chain for mini excavators in any size! Delivery from stock: 1 day, after receipt of payment Various rubber chains in stock, different sizes price on request! For more information call the mobile number 0171/8964905! Profile may change depending on batch and chain size! Shipping costs included, within Germany! Rubber chains are pre-tensioned during production (vulcanization). No retightening necessary on your excavator. The rubber chains have an endless winding. These rubber chains are used by well-known companies for the initial equipment of the mini excavator.

with 2 Fotzellen for autom. Umreifen, frame format 1000 H x 600 mms of B, roller race powered 55-cm height of the ground, 4 steel roles at the entrance 4 roles at the exit, for PP tape format 12x0,63-0,65 mmRollenkern 200 mms / 280 mmBand tensions 100-700 N380V, 50 hertz

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

Sorting conveyor with 13 electric off boxers for round wood to wood length 5, 5 m. Complete with drive unit and deflection. Hydraulic chain tensioning. 13 log kickers sorting conveyor with electrical for log length up to 5, 5 m. Including eletric hydraulic chain tensioner, driving station.

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: - max. workpiece height 245 mm - min. workpiece height 50 mm - max. workpiece width 250 mm - min. workpiece width 50 mm - working height 900 mm sawing unit - motor 7.5 kW - speed 2900 rpm. - Cutting height 145 mm (170),(245) - Suction nozzle - saw blade FI 400 mm (450),(600),(750) Horizontal/vertical milling unit - 2 vertical spindles 2 x 7.5 kW - 2 horizontal spindles 2 x 7,5 kW - spindle FI 40 mm - speed of spindles 2850 rpm - max. tool FI 180, 230, 270 (330) mm - swivel-on protective arm - suction nozzle FI 200 mm drilling unit - motor 1.8 kW - Speed 1450 rpm. - Drill FI 12 - 35 mm - Drill length 220 - 320 mm - suction nozzle FI 150 mm forehead groove milling unit - motor 4.0 kW - spindle speed 2900 rpm - max. tool FI 230 mm - spindle FI 30 mm - suction nozzle FI 150 mm Inclusive - pneumatic tensioner - roller table and right - 1700 kg weight

Chain elevator in modular design, horizontal and vertical conveying distance are variable (last used setup: 6,0 m horizontally at bottom > 3,0 m vertically > 18,0 m horizontally at the top), Incl. plastic pendulum buckets, steel ducts 410 mm x 410 mm in different langths, drive station with gear drive 1,1 kW / 56 RPM, conveyor chains, 2 pcs. drive- directing-stations, tensioning-station, return stop mechanism and 3 pcs. discharging stations. Conveying speed: 0,25 m/s.

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Very nice good working sawmilling for sale Very nice well maintained sawmill line for sale Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor . grinders Very well-kept LINE! READY TO WORK

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

Centric tensioner, very precise & stable design +/- 0.01mm, with or without middle jaw for 2-part voltage.

Saw blade grinding machine with partial gearbox Model Schmidt Tempo G 400 For grinding circular saw blades from 20 to 400 mm â?¢ Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm, removal sequence after tooth number preselection in 0.02 mm increments â?¢ Free grinding after entered saw blade revolutions â?¢ Central lubrication â?¢ 1 pc. saw blade holder: approx. 185 mm, bolt 16 mm with mech. Force-tensioning nut; Centering rings 16 x 22, 27, 32, 40 and 50 mm â?¢ 1 pc. saw blade holder: approx. 80 mm, bolt 16 mm â?¢ 10 pcs. grinding wheels of 200 mm, various widths

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

Fixed tensioner, mechanical vice with fixed jaw, B= 50, 72, 100mm, length 200 + 270mm, high-precision version made of hardened tool steel. Additional possibility for middle jaw for 2-part voltage. 100% manufactured in Austria directly from the manufacturer.

Saw units: 2 Cutting length max mm: 2200 Cutting height mm: 70 Saw blades tiltable: Yes Diameter saw blade mm: 250 Cutting length min mm: 240 Main motor kW: 1.1 Pneumatic tensioner: Yes Saw feed: pneumatic

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Technical data: - Knife length 150 mm - Special knives for processing thin sheets - 2 pcs material tensioner - mounted on sliding table - Table height 1000 mm - Space requirement approx. W 800 x H 1300 x D 800 mm - Weight approx. 100 kg

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 675 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 6 from: 270 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 2000 mm Width: 700 mm Height: 1500 mm Various accessories: Working bench: Length: 2660 mm Width: 770 mm Height: 900 mm Rear drive Foot switch Drawer(s) Belt-tensioning device for milling/grinding att. Drilling tailstock Drill chuck

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Quick closing attachment Drill chuck Turret carriage

Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°

Zero point clamping system Manufacturer: Vischer & Bolli VB tools Built: 2018 Condition: unused System consisting of: 1 piece Dock Lock steel closure plate Dimensions: 600x200x85/95 mm with 2 pieces DockLock SAFE20 built-in cylinder up to 12.5 KN per cylinder 10 Mounting holes for M16-Inbus 1 piece special base plate made of steel Dimensions: 800x250x76 mm 1 piece DEUX-MILL tensioner 1 piece special base plate made of aluminium Dimensions: 600x600x40 mm 5 pieces clamping bolt SAFE20 long with centering 10 pieces clamping bolt SAFE20 long without centering 5 pieces balancing clamping bolt SAFE20 long 1 piece hydraulic pump

Weibert NX 310 PRO-CE 5-speed station wagon Motor 3x 3,7 KW, 400V, 50Hz TERSA -Knife planing width 310mm Numerical display of the planing height Dressing tables swivel to the machine side Saw blade diameter 315 mm Cutting height 107mm to 90° Cutting height70mm to 45° Milling manduck 2900-4000 6000-7500 rpm D=30mm Sliding table 2100 x 320mm with extender Miter stop Eccentric tensioner Table extension with swing-off device for feed Weight 585kg G&RO-NX310-PRO

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 70 mm Distance between centres: 315 mm Swing over cross-slide: 85 mm Swing over bed: 155 mm Spindle hole: 12 mm Spindle speeds: number (steps): 12 from: 135 rpm up to: 2500 rpm Machine´s weight about: 150 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Sheet metal base Rear drive Lamp Belt-tensioning device for milling/grinding att. 3-jaw chuck diameter Set of jaws hard Set of collets Drilling tailstock Rotary centre Set of centres Drill chuck Hand rest

Profile bending roll hydraulic Sertom PP Output shafts size 180 mm -pre-tensioning brackets between the 3 rolls Traction tooling to bend HEB / IPE on the hard side -Lower rolls driven motorized -Top roll hydraulic pinch- bending Beivhd0xri -Top roll size 600 mm -Side rolls size 520 mm Adjustable rolls to seat and bend the different size of profiles -MAX. CAPACITY -Angle 180 mm leg-in/out- -iron bar on edge 170 mm- -Iron bar on flat 350 mm- T section 160 mm- -Pipe 8,5” inch - -Beams HEA300 - INP360- Weight of the machine 15 Ton -SIDE ARMS OPERATED IN 3 DIRECTIONS WITH DOUBLE ROLLERS- -OIL RESERVOIR WITH COOLING UNIT – -CONSOLE WITH DIGITAL BENDING POSITION AND PROGRAMMABLE READOUTS -MACHINE CLEANED AND GREASED –CONTROLLED AND TESTED UNDER POWER FULLY WORKING

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Belt: app. 880m long x 48,9cm wide with 12,5 cm clearance between levels Drum drives: 3 drives (2 x 1.1 kW + 1 x 1.5 kW) Tensioner drive: 0.37 kW Cooling: 3 x 5.5 kW fans Cooling agent: Ice Water app. 2C. Inlet temperature: 60-80C Outlet temperature: 20C Holding time: 60-120 min adjustable. Capacity: app. 2.5-3 tons per hour Manual: Available Spare parts: 1 x main bearing, 2 x drum transmission Condition: Good, disconnected from operation in May 2019

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Base-mounted type: Belt-tensioning device for milling/grinding att. 4-jaw chuck diameter Quick closing attachment Drill chuck Hand rest Fixed steady

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 175 x 45 mm : 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800 mm saw band length: 9600 mm cutting width: 1300 mm capacity 90 degrees: square: 800 x 800 mm : 1300 x 750 mm : 800 mm : 770 mm Capacity 45° rectangular: 570 x 750 mm capacity 60 degrees: round: 570 mm capacity 60 degrees: square: 770 x 770 mm capacity 60 degrees: flat: 570 x 750 mm : 800 mm : 770 mm : 1070 x 750 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 12,42 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 5,05 x 2,2 x 2,9 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulation ?Material height sensor with rap ...

saw blade diameter: 300 x 32 mm turning speeds: 3000 U/min : 85 x 85 mm : 120 x 50 mm capacity 90 degrees: round: 100 mm : 60 x 60 mm Capacity 45° rectangular: 75 x 75 mm : 80 mm total power requirement: 1,5 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 700 x 500 x 900 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.