temperature used for sale

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

HITEMA ENR.025 Chiller with scroll compressor (2021) 6 available units Unused Type: scroll System: air cooled Cooling capacity: 32.90 kW. E.E.R. at design point: 3.91 kW Minimum ambient temperature: -18 ºC Maximum ambient temperature: 38.5 ºC Type of refrigerant gas: 410A R Electrical feed according EN 60204-1: 400/3/50 V/ph/Hz Electrical cabinet: 54 IP COMPRESSOR DATA Number of compressors: 1 Number of circuits: 1 Compressor E.E.R.: 4.57 kW Total compressors nominal absorbed power: 7.20 kW Total compressor Running current (RLA): 13.10 A Partition steps per compressor: ON/OFF % EVAPORATOR DATA Inlet water fluid temperature: 30 ºC Outlet water fluid temperature: 25ºC Fluid type: water Number of evaporators: 1 Type of evaporator: Brazed plate Approval: CE-PED Nominal flow rate: 5.69 m3/h. Minimum flow rate: 2.30 m3/h. Maximum flow rate: 6.70 m3/h. Press ...

Julabo FL300 Recirculating Chiller in Undercounter Design 4.5 l The compact FL recirculating chillers are suitable for a wide range of cooling tasks and can be installed under the laboratory bench to save space. Features Ergonomic design and easy operation Splash-proof membrane keypads Large, bright LED temperature display Reliable Microprocessor PID Temperature Control Reliable, high-performance submersible pumps Permissible return temperature +80°C Easy filling and easy-access drain tap for easy emptying Under-level protection with visual and acoustic signal Integrated stainless steel bath vessels Easily accessible drain tap on the front No side vents: devices can be placed side by side RS232 interface for PC connection IP class according to IEC 60529: 21 Alarm output, potential-free changeover contact (max. 30 VA) Working temperature range: -20 ... +40 °C T ...

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, surface-mounted thermostat -Manufacturer: Jumo, surface-mounted thermostat -Type: ATH-2 -Dimension: 170/100/H70 mm -Weight: 0.4 kg

Technical parameters of the MITSUBISHI ML3015EX S2-45CF-R laser – laser power: 4.5 kW – laser type: CO2 – man-hours: approx. 17,000 h – control: simultaneous 3 axes (X, Y, Z), sensing the height of the Z axis is also possible – maximum dimensions of the element to be processed: 3050 x 1525 mm – weight of the loaded pallet: 950 kg – workpiece support section height: 880 mm – pallet change time: approx. 25 seconds – number of pallets: 2 – X axis feed: 3100 mm – Y axis feed: 1550 mm – Z axis feed: 150 mm – rapid feed (X, Y axis), speed: maximum 100 m / min. (48 in manual mode) – maximum feed speed: 50 m / min. – positioning accuracy: 0.05 / 500 mm (X / Y axis), 0.1 / 100 mm (Z axis) – repeatability: + -0.01 mm (X, Y axis) – machine weight: 10700 kg MITSUBISHI Laser Resonator – reso ...

Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through traditional commands push button panel PC hardware video keyboard and mouse Traditional commands In order to allow quick and safe intervention by the operator the controls have been provided of a traditional type for example machine stop machine running etc PC hardware The machine is equipped with the main hardware elements of the PC such as video keyboard mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine follow the values indicated storage temperature from 10 to 60 C ambient operating temperature from 10 to 45 C temperature inside panels Power electrical cabinet electrical power cabinet temperature t MAX 45 C obtained with a ventilated cabinet Vibrations The machine was designed and built in compliance with the directiv ...

Used STRATOS 10E blow molding machine for the production of PET packaging with a capacity of up to 10L. SMF STRATOS 10E is adapted to the Fi38 thread. Year of production 2016. Set includes: 1. AUTOMATIC PET BOTTLE BLOWING MACHINE STRATOS 10E with a set of molds for 1 format 2. Preform feeder 3. Bottle receiver 4. Power Wizard™ 5. Air recuperation system 6. DR-310 preform basket tipper PRODUCTION DATA • Number of sockets - 2 • Maximum package diameter - 220mm • Maximum packaging height 435mm • Packaging capacity 3.0÷10.0l ELECTRICAL SYSTEM • Voltage (standard) According to PN-EN 50160 • 400V ± 5% for fast voltage changes with an averaging time of 10 ms. • 400V ± 10% for slow voltage changes with an averaging time of 10 min. • Frequency 50 ÷ 60Hz • Connections: Three phases (3P) + Neutral (N) + Protective (PE) • Control voltage 24 V/DC • Ins ...

Machine is in excellent condition https://www.beckman/centrifuges/ultracentrifuges/optima-max-xp Platform Tabletop UCF Maximum Speed 150,000 rpm Maximum g-Force 1019000 x g BioSafe No Acceleration 10 acceleration profiles Deceleration 11 deceleration profiles Speed Control ± 50 rpm of set speed Max Capacity Volume Range 0 - 194.4 mL Refrigeration System Solid state (thermoelectric temperature control system with forced air; no coolant; no CFCs/ODCs) Temperature Control 2.00 °C of set temperature Drive Type Cooling Variable Frequency Induction Drive with rotor overspeed ID Temperature Range(s) Set temperature range: 0 to 40°C in 1°C increments Zonal Capability No Vacuum and Pump Moisture-purging vacuum system Display Full-color LCD touch screen Weight 105 kg(231.5 lb) Width 73.9 cm(29.1 in) Depth 61.7 cm(24.3 in) Height 39.4 cm(15.5 in) Clearances 7.6 cm: side  ...

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

Operating and consumption data: Product: Apple juice Water evaporation 31,550 kg/h Inlet: Quantity 36,000 kg/h Concentration approx.8.9 °Brix Temperature 10-20 °C Pre-concentrate for embellishment: Quantity approx.16,000 kg/h Concentration approx.20 °Brix Temperature approx. 50 °C Expiration: Quantity 4,450 kg/h Concentration 70-72 °Brix Temperature 55 °C after cooling 10-15 °C Aroma: Quantity (!:150)ca 240 l/h Temperature approx. 4 °C Steam consumption (5.5 bar ) for preheating and evaporation approx. 7,000 kg/h Cooling water consumption (26 °C) for condensation and cooling approx.250 m3/h Ice water consumption (1°C) for aroma recovery approx. 4-5 m3/h Operating water (15 °C) for vacuum pumps approx. 3 m3/h Electrical energy approx.80 kW

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

Description Brand Cleveland Model TKET-6T ID 7296 Status Active Price 1.500 € + VAT Year of manufacture 1999 Location Oradea (RO) Twin steam jacketed tilting kettle, Cleveland TKET-6T manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. The temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate), Operating temperature range from 145° - 260°F (63°C - 127°C), control panel includes: LED indicator for heat cycle, LED indicator for low water, power ON/OFF switch, adjustable temperature control dial. Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone", safety valve for pressures greater ...

Used Autoclave PANZER, Type: 340E -Refurbished- Year of construction: 2016 Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilizing, pasteurizing, preserving, cooking, curing and maturing. The complete heating, ALL wear parts, lid seal, safety valve, pressure gauge and the control system are renewed. All safety equipment is brought up to date (requirement of the Pressure Vessel Ordinance) - electrically heated - made of high-quality stainless steel - Lid with quick-release fastener - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully automatic. Control by F-value controller - Fully automatic. Control of operating temperature, core temperature, preselection and operating time clock (side right) - Boiler capacity: 340 liters - Operating pres ...

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

Version Type RKV 4.3 K DK Refrigerant R 407 c Refrigerant charge kg 3.2 Cooling capacity at tw +20°C kW 12,2 Operating pressure max. bar 28 Temperature range Water flow min. °C + 10 Water flow max. °C + 25 Ambient temperature min. °C + 10 Ambient temperature max. °C + 50 Compressor at tc/to=53/15°CZR 61 Number of pcs. 1 Fully hermetic design Nominal power kW 6 Rated current A 9 Rated current max. A 11 Evaporator Plate arm exchanger version Material copper Condenser Air-cooled, axial version Material Cu tube / aluminium fins Fan FB050-VDK.4I.V4S Number of pcs. 1 Axial fan version with blade Nominal power kW 0,8 Nominal current A 1.6 Air flow m³/h 5000 Rated speed n 1290 Electronic version Digital temperature display Switching capacity AC / A 2 Dimensions Width approx. mm 750 Depth approx. mm 1050 Height approx. mm 1100 Weigh ...

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...

The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

- Manufacturer: CFS – GEA - Machine number: Cook Star 1000/12/75 – 382 - Year built: 2006 - Type: thermal - Heating capacity: 1200 kW - Total power: 102 kW - Current: 175 A - Supply voltage: 460 – 3 – 60 Hz - Number of turns: 2 x 6 - Treadmill: Omnigrill small department - Max. belt load: 15 Kg / m - Cooking length (Net): 160 m - Retention time (min-max): 6.5 – 195 min - Product speed: (max-min): 24.6 – 0.82 m /min - Entrance height: 1150 mm - Output height: 1150 mm - Weight: 40000 Kg (40 t) THERMAL OIL SPIRAL - Thermal oil spiral capacity: 1200 kW - Max. air temperature: 200 °C - Thermal oil inlet temperature: 300 °C - Volumestream thermal oil: 2 x 42 m3/h - Thermal oil spiral resistance and temperature regulation: 2.24 bar - Thermal oil spiral with max. permissible suppression: 8 bar - Oil volume incl. temperature regulation: 1000 L - Connection ...

Container 490 liters of V2A, used, temperature-controlled, insulated consists of material 1.4301(AISI304) V2A. The volume is about 490.00 liters. The diameter inside is 700 mm. Container 490 liters made of V2A, used, temperature-controlled, insulated has the following dimensions: length 1,200 mm, width 1,000 mm, container 490 liters made of V2A, used, temperature-controlled, insulated was last used in the following area: Food. Currently, 490 liters of containers made of V2A, used, temperature-controlled, insulated still 4 pieces are available. Delivery can take place worldwide.

approx. 1,350 pieces open fronted storage bin, 4 sizes, Treston transparent - second-hand - : Price per piece ex location (net)! Treston 1940-1: approx. 800 pieces: 7.- €/ piece Treston 1930-1: approx. 100 – 150 pieces: 6.- €/ piece Treston 1950-1: approx. 150 – 200 pieces: 11.- €/ piece Treston 1525-1: approx. 300 pieces: 5.- €/ piece Minimum order: 1 pallet Manufacturer: Treston Type: unknown Year of construction: unknown, Condition: good – very good Available: now Location: D-12277 Berlin Treston 1940-1 Original price approx. 15.-€ / piece External dimensions in mm (L x W x H): 400 x 186 x 156 Internal dimensions in mm (L x W x H): 330 x 155 x 140 Capacity: 7.2 l Color: Transparent Made of dimensionally stable polystyrene Resistant to acids and alkalis of all kinds Temperature resistant from -40° Celsius to +55° Celsius Practical re ...

The Güntner air cooler with model number GVVX 071.1B/3-MD.E and fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, making it suitable for use in a wide range of environments. This air cooler was manufactured in 2014 and features a sturdy construction that ensures its durability and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow for optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice for coolin ...

Manufacturer: FST Type: DFX 18 Year of construction: 2017 Compressed air: 14 bar Minimum temperature compressed air: 14°C Maximum compressed air temperature: 55°C Refrigerant: R134.a 0.42 kg Minmal temperature refrigerant: -10°C Maximum temperature refrigerant: 120°C

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Juice Pasteurizer Gebhardt EHA45 Electrically Heated 450 l/h Never Installed This Gebhardt juice pasteurizer is specifically designed for fruit juice production in small firms or gardening and horticultural associations. It can handle also juices with pulp and even tomato juices. This Gebhardt EHA45 pasteuriser is equipped with coaxial spiral heat exchanger and hot water circulating pump. The juice tube of a smaller diameter is located inside a larger hot water pipe. Hot water and pasteurised juice move in the opposite direction of each other, ensuring that the juice is warmed evenly. The power of the pasteuriser is step-by-step adjustable according to the number of operating heaters. The thermostat keeps the hot water temperature at a desired level selected by the user, which should be 4-5 degrees warmer than the temperature of the juice that comes out. The juice temperature is ad ...

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

JACIR SX-3021-A-185 Brand:JACIR Type:SX-3021-A-185 Stock number:M23-3341 Cooling capacity:1,000 kW Application:Cooling Number of fans:1 Displacement:172 m³/h Refrigerant:Water (H2O) Voltage:400 Volts Motor power:18,5 kW Dimensions:5240 x 2350 x 3000 mm Weight:800 kg Year:2016 Number in stock:2 piece(s) Price:On request Nice Jacir open cooling tower with 1 fan. Mentioned capacity at a water temperature of +32/27°C (inlet/outlet) and a wet bulb temperature of +21°C. (Q=1400 kW at Tw= +38.5/31.5°C and wet bulb temperature= +24°C and 172 m3/h), (Q= 936 kW at Tw= +35/28°C and wet bulb temperature= + 24°C and 115 m3/h). Visit our website: used-refrigeration

Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 - Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturers plate 2 - Fan n?1 Manufacturer: Kiekens Model: 8 KTEN 355 Year : 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80?C Atex : yes Ex II 3D/G td nA 3 - Fan n?2 Manufacturer: Kiekens Model : 8 KTEN 28 ...

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

50 liter BCD mixing tank with Huber temperature control (0 to 65°C) With agitation, lid lifting, tank lighting, 4 vents. 1 scoop of C.I.P. All documentation is in English (including the FAT) 1 tank of their 1 Huber temperature control system are available., Volume: 57 liters, Useful volume: 50 litres, Metal tank: 316L, Tank metal: 316L, Pressure +: ATM, Pressure -: -6.5ATM, Elec: 400V 50Hz, Agitation type: Tri-blade / from above, Stirring speed variation: Yes, Engine: ABB, Engine power: 0,25kW, Cover diameter: 450mm, Tank bottom outlet: Yes / 25mm, Event: Yes, Mobile tank: Yes, Double envelope: Yes, Double envelope metal: 304L, Metal of the double envelope: 304L, Double envelope volume: 10 liters, Double envelope pressure: +6.5, Double envelope fluid: Gas Group 2, Dimensions (mm): 600 x 1250mm H2000mm, Weight (kg): 438 / 505kg, Temperature design: 0-150 ° C, Design temperature: 0-150° ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...