temperature used for sale

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH M.T.A. S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature +7 °C Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Start ...

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH M.T.A. S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature +7 °C Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Start ...

This is a rectangular pressure cooker FER250 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. The RRP for this device is €29,970 net. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal Technical de ...

A Krones glass bottle filling line Equipped with a bottle vacuum system Performance today. 14,000 bottles of wine per hour Type filler: K 323-152, year of construction 2000 Bloc formation mechanically with a Krones Rinser machine Variojet Type K 562-235 with motorized higher adjustable filler upper part and with manual locking for VK- VKS- VC- VVHL and VVHK filling system 7 different wine bottles were bottled (Sample see photo) with manual cullet and filler exterior spraying, manually controlled. with disinfectant spraying device for vacuum fillers with 2 nozzles including control with set of sterile air filters with steam sterilization unit Rinser Medium 1: Water, temperature 50 to 55 °C with collecting tank with circulation pump, equipped with Container Level Control and Temperature Monitoring Medium 2: with saturated steam heating Medium 3: Sterile air with 2 ...

This is a 150 litre pressure cooker round (FES 150) from the premium manufacturer Küppersbusch (Phoeniks). Emptying is carried out without any problems via a safety drain tap. The pressure cooker has an electronic temperature controller as well as a KCI touch panel control (Inovative). The device has undergone a major inspection in our in-house workshop and is fully functional. The pressure cooker kettle is completely unused and in top condition. The RRP for this device is €19,165. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connecti ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 101 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 101 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 25.2 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 4.4 Available pump pressure bar: 0.616 Ambient temperature +7 °C Cooling capacity kW 22.8 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 3.88 Available pump pressure bar: 0.694 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 12.51 Max. current (A) 30,41 Sta ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 101 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 101 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 25.2 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 4.4 Available pump pressure bar: 0.616 Ambient temperature +7 °C Cooling capacity kW 22.8 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 3.88 Available pump pressure bar: 0.694 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 12.51 Max. current (A) 30,41 Sta ...

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at controlled temperature. Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : - 1 Barg Max temperature : 200?C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature: 200?C Other Sold with platform + stairs + feed hopper.

Liebherr Commercial Refrigerator Gkv 4360-20 Execution: Cooling Type: Cooling Operating mode: Convection cooling Door hinge: right Door design: solid door Inside white plastic Cleaning procedure Galvanized grates Large capacity SwingLine door with bar handle Replaceable door hinge Replaceable gasket Humidity adjustable Digital Door & Temperature Alarm Automatic defrosting Materials: Material: Stainless Steel Inner material: plastic Replaceable door hinge Climate & Environment: Energy efficiency class: D Energy consumption: 2,031 kWh/24 hours Refrigerant: R 600 a Product Identifications: MPN: GKv 4360 EAN code: 9005382196519 Temperature info: Temperature range: +1°C to +15°C Contents: Volume: 434 ltr Weight info: Weight: 72 kg Device connection: Connected load: 100 Watt Mains voltage: 230 volts Metrics: Length (width): 680 mm Dept ...

Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central  ...

This is a rectangular pressure cooker FER300 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Technical details: •Dimensions WxDxH: 1600x850x900 •Weig ...

This is a CM (P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2019. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6-month warranty on electrica ...

Used autoclave ASCA with 340 liters capacity -Refurbished- - 12 months warranty - for sterilizing, preserving, pasteurizing, cooking, curing, and maturing - Compl. made of high-quality stainless steels - Lid with quick-release fastener - Equipped with all safety-related equipment - Latest requirements of the valid Pressure Vessel Ordinance - All safety-related equipment, such as safety valve, pressure gauge, overheating protection, steam release valve, safety outlet valve, etc. installed - Subjected to construction and pressure testing by TÜV, certificates are enclosed - Fully automatic control by F-value controller including operating temperature, core temperature, F-value control, preselection and operating time clock Specifications: - Capacity: approx. 340 litres - Heating: Gas via gas blower burner - Operating pressure: up to 2.5 bar - Temperature range: up to 13 ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 10 x 1/1 Gastronorm inserts in gas version, built in 2012. The device is tested, overhauled and fully functional in our in-house workshop. The RRP. for the device is € 11,950 net The price quoted is net plus 19% VAT. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back • Shipping or pick-up can be flexibly selected • Expert advice - before and after the purchase • Provision ...

This is a combi steamer from the manufacturer Rational, type CM 61 in electric version. The pictured base is not part of the offer, but can be purchased as an option. The combi steamer has been overhauled in our in-house workshop and the device is fully functional. Our used equipment service for you: •3 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Modes: •Hot air 30°C to 300°C •Combination of steam and hot air 30°C to 300°C •Vario steaming at 30°C to 99°C •Finishing •Steaming at 100 ...

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W15 4XL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 24kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W940xH250 | machine dimensions (mm): L2800xW1460xH1280 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Laser heater Qlima SRE 8040 TC silver Only 8 pcs available Stock clearance This powerful SRE 8040 TC laser heater brings a lot of heat into your home. The integrated digital display makes it easy to select the desired temperature or function. The built-in thermostat adjusts the power according to the set temperature. In addition, the SRE 8040 TC is equipped with most standard functionalities such as a day timer and fuzzy logic. Thanks to the "Fuzzy Logic" of the Qlima SRE 8040 TC, the room has the preset temperature at the desired time. This laser emitter is also equipped with an automatic burn time extension. When the fuel runs low, the device automatically switches to a lower combustion level, so that the refilling of the fuel is postponed for some time. The lasers from Qlima, full of technical ingenuity! The heater comes with a handy fuel siphon pump. Fuel When choos ...

Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20XXL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 30kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W700xH300 | machine dimensions (mm): L2100xW950xH1315 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Shrink tunnel for middle sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20L PRO-version and speed shrink W30L PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 14kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W370xH230 | machine dimensions (mm): L1200xW670xH1290 | weight (net/gross): ca. 250/300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

(1) Gas (2) Fuel (3) Electric: 2   Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES  ;Furnaces are used in many industries to produce a wide range of products under demanding requirements.  this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements.  with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

Floor dimensions: 3,000 mm x 22,000 mm ; complete mesh tape; Baking area: 132 m²; Temperature regulation: separate for upper and lower level; Temperature zones: 2; incl. jacks front and rear; incl. loading conveyor: 4 x 3 m (LxW); Boiler: KO 500; Power: 465kW; permissible operating overpressure: 10 bar; permissible operating temperature: 300°C; incl. 2 thermal oil boilers; Dismantled

Rieber MaxMo Cold Buffet Edition The Rieber MaxMo Kalt Bain Marie is a professional cooling system that has been specially developed for use in gastronomy and catering. This innovative device allows you to present a variety of cold dishes such as salads, desserts, cold cuts, seafood and much more at the optimal temperature and keep them fresh. The Kalt Bain Marie has precise temperature control that allows you to set the desired cooling temperature for each dish individually. Due to the constant cold, the food is stored safely and hygienically, which preserves the quality, taste and appearance of the dishes. The Rieber MaxMo Kalt Bain Marie is characterized by its high-quality workmanship and first-class materials that ensure efficient cooling. The appliance is energy-efficient and environmentally friendly, so you can optimize both the quality of your food and your operating co ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 131 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 131 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C intake temperature. Includes crankcase heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 35.5 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 6.18 Available pump pressure bar: 0.644 Ambient temperature °C +7 Cooling capacity kW 31.8 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 5.41 Available pump pressure bar: 0.8 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 16 Max. current (A) 29 St ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 131 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 131 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C intake temperature. Includes crankcase heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 35.5 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 6.18 Available pump pressure bar: 0.644 Ambient temperature °C +7 Cooling capacity kW 31.8 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 5.41 Available pump pressure bar: 0.8 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 16 Max. current (A) 29 St ...

Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solventl ...

Overview  The bottle washer was manufactured in 1998 by the German company Krones. It is located at a German mineral fountain and is part of a line that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The bottle washer is still assembled.  Technical data  Capacity: 44,000 bph  Control range: 17,000 - 50,000 bph  Bottles per row: 35  The Machine in Detail / Equipment Features Residual emptying Pre-soak/ pre-caustic High pressure pre-spraying with automatic screen discharge Machine multi-part with 3 shocks Pre-soak, water zone incl. head section Discharge in V2A Post-leach immersion bath KES Post-leaching area in V2A  Bottle cell in steel with plastic mouth Feeding table in VA Insertion finger feed with safety shutdown Discharge with pick-up finger and safety cut-out Muzzle basket control at the ejector Shard ejector behind the d ...

The SORVALL RC-6 PLUS Centrifuge is perfect for high throughput sample processing. A few scratches on the side., Maximum speed (rpm): 22000, Temperature control (°C): +2 to +40 , Temperature setting range (°C): -20 to +40 , Temperature accuracy (°C): +2, Gas type: R404a

Duct sensor for temperature, duct temperature sensor THERMOKON AKF1013507 Art. No.: 0000000022149 Measuring range: 0 - +160 °C Temperature Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC Sensor length: 130 mm Sensor diameter: Ø 7 mm New ! Dimensions ( duct sensor ): 175 x 83 x 50 mm Dimensions ( packaging ): 245 x 95 x 55 mm

Vötsch VT 7012 S2 Thermal shock test chamber Thermal shock test chamber Two-chamber design The temperature control of the hot chamber ranges from +50 °C to +220 °C (optionally up to +250 °C), that of the cold chamber from -80 °C to +70 °C. Test chamber volume 125 l Temperature range hot chamber +50 °C to +220 °C Temperature range cold chamber -80 °C to +70 ° Regulation and control: Controller board with detachable color panel Type: VT 7012 S2 More items - new and used - can be found in our shop! International shipping costs on request!

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

• Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper. • Particularly suitable for the preparation of highly viscous pastes and sealing compounds, consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm) • Speed planetary disc 7-84 rpm • Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides • High-speed mixing shaft with reversal of direction of rotation • 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product) • Container diam. 270 mm, depth 316 mm, total height 335 mm • Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water • Hydraulic container lifting/lowering device • Press-out device, ...

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: 994-603 -Weight: 3 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16 / P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs. -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 UB 2623/00 -Processor card: Bachmann STU 500 UB 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 ZB 2563/01 -Power supply: Bachmann SNT 411/2 -Card Rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog  ...

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Card slot: Bachmann CST 500 (K1) / DNT B 2636/04 -Busprint: Bachmann BUS 500/1 B 6661/00 -Power supply: Bachmann DNT 90 / UB 6811/00 -Output card: Bachmann CA 16 / P 2.5 SB 6147/00 2 pcs. -Input card: Bachmann CE 32 / 1S B 6144/00 -Processor card: Bachmann CC 11/4 B 6047/00 -Coupling card: Bachmann KOP 500 U / SB 6786/00 -Control card: Bachmann MF 600/1 B 3736/01 -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -An ...

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: SIPART DR24 -Price: per piece -Number: 1x available -Weight: 1.5 kg

Complete soft drink production unit for sale. We offer the following machines for sale as a package: - TLG vacuum filling machine -ALCOA capping machine -APV pasteurization equipment -GRAMEGNA shrink wrap machine -ELF EUROPE Duplex oil and water-based filling machine. The machines have not been used since 2004, we just stored them, hoping to start the activity again. The equipment is in excellent condition, only because it has not been used, so it requires maintenance. Sold as a package at this price. 1.INTERPLAST GRAMEGNA SHRINK FOILING MACHINE FOR SALE. Year of manufacture 1998. UE98069, BJ6/1998. It is in very nice condition. We havent used it since 2004, we put it aside until now, just in case we need it again. We used it in our soft drink production plant. Package size: 500×200 mm, max foil width 600 mm. Capacity 8000 pcs/h, sold together with buffer belt and con ...

Wet fermenter B-440: Pre-combustion device for determining ash. It enables the ecological pre-mineralization of different types of samples. Its specialty is a wide range of possible temperatures (up to 600 ° C). Programmable temperature ramps enable repeatable processes. Application: - Ash mineralization -Mineralization of sulphated ash -Burn wet - Evaporation of volatile acids and bases - heating test (e.g. for reaction) Technical specifications: Dimensions (WxHxD): 470 x 290 x 370 mm Weight: 12 kg Adjustable time range: 0-240 minutes Adjustable temperature range: 10 - 600 ° C. Program: 9 methods Number of weeks: 6 Voltage: 220 - 240 V ± 10% Frequency: 50/60 Hz Power: 1200 W. Scrubbeer B-414 Device for absorbing demineralization vapors at Buchi B-440. The washer protects the user and the environment not only by neutralizing harmful vapors and ...

This high-quality laboratory freezer is a must-have for any lab that requires ultra-low temperature storage. With a spacious interior and sturdy construction, this freezer is perfect for storing a variety of items in a safe and secure environment. It is designed to maintain a constant temperature, ensuring that your samples remain fresh and protected at all times. Ideal for use in physical, emergency, dental, medical, microbiological, and biological laboratories, this freezer is made by PHCBI and is of the highest quality. It is a Type freezer, specifically designed for use in labs, and is branded PHCBI. Dont miss out on the opportunity to own this exceptional piece of lab equipment. Power Draw:0.81kWEcological Features:Designed and constructed for peak performance and reliability while maintaining efficient operating costs. Type:Upright Capacity:360l Insulation type:VIP High energy effi ...

Pre-combustion device for determining ash. It enables the ecological pre-mineralization of different types of samples. Its specialty is a wide range of possible temperatures (up to 600 ° C). Programmable temperature ramps enable repeatable processes. Application: - Ash mineralization -Mineralization of sulphated ash -Burn wet - Evaporation of volatile acids and bases - Heating test (e.g. for reaction) Technical specifications: Adjustable time range: 0-240 minutes Adjustable temperature range: 10 - 600 ° C. Program: 9 methods Voltage: 220 - 240 V ± 10% Frequency: 50/60 Hz Power: 1200 W. Scrubber K-415 Device for absorbing demineralization vapors at Buchi B-440. The washer protects the user and the environment not only by neutralizing harmful vapors and reaction gases, but also by minimizing water consumption. A wide range of applications thanks to 4 c ...

Memmert VO500 PMP500 Vacuum Oven 101L Peltier Thermoshelf 200°C Heating concept specifically adapted for a precise and homogenous temperature control Up to 40 ramps with different temperature and vacuum setpoints can be programmed either directly on the controller or using the Memory-Card. Volume 101 l Dimensions w(A) x h(B) x d(C): 545 x 465 x 400 mm Max. number of internals 2 Max. loading of chamber 60 kg Max. loading per internal 20 kg Textured stainless steel casing Dimensions w(D) x h(E) x d(F): 710 x 760 x 550 mm Housing rear zinc-plated steel Voltage Electrical load 230 V, 50/60 Hz approx. 2400 W Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing Overvoltage category II Pollution degree 2

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

Stephan Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Previously used in the processed / melted and cream cheese production (vegan as well). Machine bowl with top slide and a bottom valve, lid and side covers are all made of stainless steel. Machine frame in painted steel. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x twin cutting blades, max working pressure in the bowl -1 / 0,3 bar (protected with overpressure valve), max temperature in the bowl 95 °C, bowl volume: 300 liter, 1x infeed hydraulic slide gate on the top for main product including big up and down movable hopper (hydraulic), 1x outfeed valve at the bottom for the outfeed o ...

WB-Busser Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x mixing blades, max working pressure in the bowl 1,5 bar (protected with overpressure valve), max temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, open infeed hopper (3 liter) with valve for adding powders, water dosing system with Endress & Hauser flowmeter, opening of the lid with pneumatic cylinder, scraper of the wall is electric driven (0,75 kW - ± 25 rpm), 2 manual tightening clamps. Main motor for the cutting knife: 380 Volt - 50 Hz - 18,5 kW - 300 till 3.000 rpm. Vacuum pump (30 m3 ...