temperature control unit used for sale

White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...

Thermotron Temperature Chamber Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working range volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Feed dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 28.4 A Refrigerant: R-404A / R23 Approx. Weight: 862 kg Type: Thermotron SE- 1000-5-5 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which ...

White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...

White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are  ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2X lateral implementation 9cm Refrigerant VK R 452 A Weight approx. 300 kg Type: HT 7020 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature range -70°C to + 180°C Temperature deviation over time ±0.1 to ±0.5 K Temperature deviation ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test room dimensions: Width 580 mm Depth 450 mm Height 750 mm External dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test room volume 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on site: 32 A sluggish Sound level at a distance of 1m (free field measurement) < 69dB (A) lateral feedthrough 50 cm / 125 cm Cabinet is water-cooled Refri ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature deviation over time ± 1 K Temperature deviation spatially ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x lateral implementation 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to  ...

Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Basic unit type VT 7021 Operator terminal color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature selector limiter min./max. serial interface RS 232 Schuko socket potential-free contact for test material shutdown Refrigeration unit air-cooled 1 door lockable, one-hand operation Calibration of 2 temperature values Mobile version 1 bushing, NW 80 mm, right Test room volume 210 liters Temperature range -70°C to +180°C Temperature deviation over time ± 0.2 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min heat compensation 800W  ...

Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.

For sale is a used high-temperature analyzer, from the manufacturer Elementar Analysensysteme GmbH. The liquiTOC trace is functional and ready for use. Year of Make: 2007 Mains voltage: 120-230 V AC +-10%, 50/60 Hz Connected load: approx. 1.9 kVA Operating Modes: TC, TIC, TOC, NPOC, POC Calibration: linear Sample volume: 0.05-4ml, depending on the concentration range Analysis duration: 6-22 min, depending on operating mode Sample storage type: PS 61E Weight: approx. 50kg The instruction manual is provided. Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat -Manufacturer: Jumo, temperature monitor -Type: TB 0 -System outputs: AC 110..240 V -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

RS Simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test room dimensions: 530 mm x 630 mm x 530 mm (WxHxD) External dimensions: 820 mm x 1750 mm x 1300 mm (WxHxD) Current consumption: 13.5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, temperature transducers -Manufacturer: Phoenix Contact, PT100 temperature monitor -Type: MCR-SL-PT100-SP -Price: per piece -Quantity: 7 pieces -Dimensions: 100/13/H115 mm -Weight: 0.1 kg/piece

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter -Type: TB 0 -System outputs: 20..30 V -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din -1 package, contents 10 pieces -Weight: 0.8 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: tmg, temperature sensor type VH54.9i301 -Item No.: 1012919 -Measuring range: -40 to 50°C -Number: 3x temperature sensors available -Price per piece -Dimension: 263/136/83mm -Weight: 0.6 kg/pc.

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: Screw-in temperature sensor -Measuring range: 0 to 160°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimensions: 330/260/H140 mm -Weight: 1.3 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 160°C -Measurement probe: Screw-in length approx. 200 mm -Transport dimension: Ø100 x 240 mm -Weight: 0.4 kg

Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 -70°C to +180°C 1035 Litre(s) More items - new and used - can be found in our shop! International shipping costs on request!

Temperature controller, temperature sensor, temperature setting -Type: 237.0120-035 Price: per piece -Number: 28 available -Weight: 0.5 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available.

Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible.

Drops to -80°C Auction-ID: A1-51251-30

Remote temperature display MERTIK, EAW 0 - 200 °C ( 0-200°C ) TGL 19472 Probe PT100 with 4 switching points New ! Dimensions: 355 x 195 x 100 mm

Remote temperature display, portable MERTIK, EAW 0 - 900 °C ( 0-900°C ) TGL 19472 sensor: NiCr-Ni with 2 switching points New ! Dimensions: 350 x 195 x 110 mm

Temperature sensor WTW TFK 150 1m Connection cable New ! Dimensions: 200 x 100 x 20 mm

Cable temperature sensor SIEMENS QAZ21.5220 Measuring range: 0 - 95 °C Connection cable: approx. approx. 1.2 m Measuring depth: 540 mm Probe diameter: Ø 6 mm Flange diameter: Ø G1/2 Accessories for AGIE CUT 300 ! New !' Dimensions: 600 x 30 x 30 mm

Cable temperature sensor SIEMENS QAZ21 Measuring range: -50 - 80 °C Connection cable: approx. approx. 1.9 m Dimensions (probe): Ø 7.5 x 60 mm Accessories for AGIE CUT 300 ! New !' Dimensions: 170 x 170 x 20 mm

Vötsch VCS 7100 Climatic Test Chamber - 70 °C to + 180 °C Manufacturer: Vötsch Type: VCS 7100 Temp. range: - 70 °C to + 180 C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A Height: 1980 mm Width: 1350 mm Depth: 2060 mm Chamber: Height: 900 mm Uyy3I3Fol2 Width: 970 mm Depth: 1400 mm KK-05 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1998 TK 09 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1997 TK 08 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1996 TK 07 More items - new and used - can be found in our shop! International shipping costs on request!

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...

BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Equipment: Spacious interior with stainless steel shelves and doors for optimal sample organization Strong insulation for constant temperature even in the event of a power failure Digital control element with temperature display RS232 interface for external monitoring and data acquisition Robust castors for easy transport Condition: Used, functional With slight signs of wear (see pictures) Interior clean and fully equipped

Arburg 120.529 SN 2.5275G temperaturecards Multronica Spritzgiessmaschine Ersatz Hersteller: Arburg Teilenummer: SN 2.5275G Type: 120.529 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11000323

Arburg 14326-Z SN 158.058 Temperaturecard (18) Dialogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 158.058 / SN 158058 Type: 14326-Z Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11082523

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/4.um.fp/D92.160/161 -Dimensions: 265/145/H145 mm -Weight: 3 kg

Panel-mounted measuring instrument, panel-mounted measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring instrument, control panel, temperature measuring device -with: Measurement and control technology type M19 -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg

Temperature sensor, duct temperature sensor -Type: QAE2120.010 with fully active sensor rod for mean value measurement -Technical specifications: -Immersion length: 400 mm -Protection class: IP42 -IP54 with cable gland -Application range: -50...+80 °C -Measuring element: Ni 1000 Ohm -Connection: 2-wire -Weight: 0.3 kg