136,773 used machines on RESALE, but how to find them? Machine Search
Digital Temperature Controller STÖRK - TRONIK ST70-31.10 12 - 24 V AC/DC Mint ! Dimensions: 75 x 75 x 35 mm
Temperature controller, thermostat BÜRKERT Type: 080/B060/4030 10 - 100 °C 380 V 10A New ! Dimensions: 540 x 130 x 75 mm
Temperature Controller CAL CONTROLS 9400 code: 94000000FM Operating voltage: 100 - 240 V AC, 50 - 60Hz Power consumption: 4 VA Switching capacity: 250 V DC, 2,2,000 0 A SSR Drive: 5.0 V DC, 15 mA sensor: RTD / PT100 for front panel installation: 45 x 45 mm used, tested ! Dimensions: 120 x 52 x 52 mm
Temperature controller MERTIK, EAW Type: 211.14 TGL 22502 Sensor PT200 switching difference: 1 K 220 V AC max. 8 A IP55 New ! Dimensions: 180 x 135 x 80 mm
An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible.
Electronic Cards Temperature Controller up to 3 sets are available
Omron Solid State Relay Item number: G3PB-225B-VD INPUT 12 – 24 V DC LOAD 50/60 Hz 100 – 240 V AC, 25 A switching load for switching temperature loads Mint condition !
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Juchheim, temperature controller type HROt-48/k,ap,os -Temperature range: 0 to 1200 °C -Dimensions cardboard: 195/105/H120 mm -Weight: 0.5 kg
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation -Art.Nr.: 624603-10114-JR10A -Dimension: 130/100/H95 mm -Weight: 0.5 kg
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: RAM, temperature controller type 320.012 -Temperature range: 30 to 130 °C -Quantity: 2 controllers available -Price per piece -Dimensions box: 90/80/H50 mm -Weight: 0.2 kg
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: West 6600 -Article No.: 0906 Z220000 S -Number: 6 controllers available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Eliwell, Digital Temperature Controller PID Controller -Type: EWTR 940/h -Quantity: 1 controller available -Dimensions: 120/70/H70 mm -Weight: 0.4 kg
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Temperature controller: analog, 0 to 35 °C -Adjustment: with key, see photos -Voltage: up to 380 volts -Switching capacity: 30W / 50VA -Transport dimensions: 330/300/H150 mm -Weight: 1.5 kg
Temperature controller, temperature sensor, temperature setting, signal converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Oumefar, Digital PID Temperature Controller -Type: REX-C100FK02-V -Quantity: 1 piece regulator available -Dimensions: 110/50/H60 mm -Weight: 0.2 kg
Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Bitric M1-B -Setting value: from 0 to 400 °C -Auxiliary power: 220 V 50/60 Hz 5 VA -Output: 1x changeover contact max. 220 VAC 4 A 900 W -Price: per piece -Quantity: 3 available -Weight: 1.1 kg
Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller, PID controller, control cabinet heating thermostat -Manufacturer: Eberle, Digital PID Temperature Controller -Type: 17225 6905 -Temperature range: 10 to 60 °C -Quantity: 2 controllers available -Price: per piece -Dimensions: 65/50/H40 mm -Weight: 0.1 kg
Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees ., Capacity: 2000 kg/hr, Conditions of sale: As is” or Refurbished , Hopper: Twin Screw , Drive: Self driven by motor and belt with reducer , Outlet: Double jacket outlet for temperature Control , Location: In stock
MATERIAL TYPE: Temperature control BRAND: "OMRON" MODEL: E5CCRX3A5M000 Location: F7 Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th
Batch consisting of various temperature controllers and display units of various brands. Auction-ID: A1-50936-130
Used Imtec AT70297 temperature controller with battery bath Auction-ID: A1-50936-163
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...
245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...
610 hL (260 + 175 + 175 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on feet Brand Martinez Sole Flat bottom tank on superimposed legs Capacity: 260 hl + 175 hl +175 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B Year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with internal openin ...
289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...
289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
220 hL – Lagouarde – Temperature-controlled 304 stainless steel tank with flat bottom and casing This LAGOUARDE temperature-controlled stainless steel storage tank with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical configuration, combined with a flat bottom with casing and its flag thermoregulation equipment, makes it a practical, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LAGOUARDE Total capacity: 22,000 litres Material: stainless steel Thermoregulated Roof Eccentric chimney on the front with hatch Ferrule 1 rectangular door external opening 1 partial drain valve on square flange Thermoregulated: flag Flat bottom with housing 1 total drain valve on square flange Dimensions Diameter: 2500 mm ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
610 hL (260 + 175 + 175 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on feet Brand Martinez Sole Flat bottom tank on superimposed legs Capacity: 260 hl + 175 hl +175 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B Year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with internal openin ...
610 hL (260 + 200 + 150 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on legs Martinez Sole Brand Flat bottom inclined tank on superimposed legs Capacity: 260 hl + 200 hl + 150 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with inter ...
360 hL – Vautier – Temperature-controlled 304 stainless steel tank with flat bottom inclined 22% on skirt This 360 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and agri-food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its temperature-regulating equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 36,000 litres Material: stainless steel 304 Tanks N°: 1; 2; 3 and 4 Roof Chimney chimney ø 600 Shell Rectangular door with external opening 800×600 with mud flap and 10 closing points 2 valves ø 50 1 valve ø 70 Dial thermometerLevel gauge Winding tubing ø 70 2 flat flags 4 regulation rings Temperature probe ...
138 hL – ETA – Temperature-controlled 304 stainless steel tank with a sloping flat bottom on a stainless steel base This 304L stainless steel temperature-controlled storage tank with a capacity of 138 hl is designed for the storage of liquids in the wine and food industry. Its configuration, combined with a sloping flat bottom on a stainless steel base, a brushed exterior finish and its thermoregulation system by internal coil radiator, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: ETA Material: 304L stainless steel Total capacity: 13,800 litres Temperature-controlled tank Interior finish: raw rolled, stripped and passivated Exterior finish: brushed, stripped and passivated Roof Drain socket with plug 1 chimney chimney chimney Shell 1 ladder support bar 1 tap ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...
Item number: 1761655-81 Serial number: LA-3811-G Electrical connection: 440 V AC Phases: 3/PE Maximum oil temperature: 180 °C Maximum operating pressure: 0.6 MPa / 6 bar Test pressure: 2.25 MPa / 22.5 bar Oil volume: 9.4 liters Auction-ID: A1-51285-426
HUBER - CC2 Compatible Control + CFC & H-CFC free Thermostatically controlled thermal and bath regulator Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID ...
maximum number of results exceeded
please refine your search
10 € 
