temperature control unit used for sale

Serial number: 2-40965. Power: 2.3 kW. Year of manufacture: 10/2019. Auction-ID: A1-51529-17

CDR - CiderLab SLB222 - (2023) Instruments for analytical quality control of various types of foodstuffs Auction-ID: A1-51527-221

Mixed pallet of industrial process-control equipment, comprising electrically/pneumatically actuated valves, valve actuators, circulation pumps, gas-control equipment, flow/balancing components and electrical/control equipment. Visible manufacturers include Wilo, Dungs and Siemens, together with other unidentified industrial manufacturers. Contents visible include: Wilo TOP-S50/7 flanged circulation pump, 3~ 400/230 V, 50 Hz, PN 6/10 Additional Wilo circulation pump Dungs gas valve/control assembly with two-stage actuator; marking includes MVD-R 1350 (2.St.), 230 V Siemens Acvatix SQX32 valve actuator Several large electric valve actuators/drive units Multiple electrically actuated flanged control valves Pneumatic actuator and valve assemblies Flanged inline flow/balancing or measuring valve with pressure test points Assorted blue electric actuator units Orange actuator/contr ...

Never used / sold in original carton Auction-ID: A1-51538-272

Powered belt conveyor with green conveyor belt and aluminium profile frame. Equipped with electric geared motor and DUBANG adjustable speed controller. Adjustable feet and side mounting/guide profiles. Auction-ID: A1-51282-61

QIAGEN Hilden - QIAcube - SN 13550 - (damaged plexiglass glass) Laboratory automaton, used to automate the extraction and purification of DNA, RNA and proteins in molecular biology Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a s ...

industrial shut-off and flow-control valves, predominantly knife-gate valves and butterfly valves in various sizes and configurations. Suitable for industrial process, water, wastewater and similar piping applications. The lot includes manually operated valves with handwheels as well as several fitted with electric and/or pneumatic actuators. Visible manufacturers/components include VAG, Regada and others. A VAG ZETA knife-gate valve is identifiable among the equipment. Details: Type: Industrial shut-off / isolation valves Predominantly knife-gate and butterfly valves Various nominal diameters and connection sizes Flanged and wafer-style configurations Manual handwheel-operated units Electric actuator-equipped units Pneumatic actuator-equipped units Various manufacturers and models Quantity: 1 mixed pallet, contents as pictured Auction-ID: A1-51282-38

SARTORIUS STEDIM Biotech - BIOSTAT B + FRIGOMIX 1000 + DZ VHC Designed to meet your specific needs, Biostat ® B covers a wide range of applications, from a flexible base unit for preclinical research to a fully qualified system that meets the requirements of a validated GMP environment Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale pr ...

x-travel: 1400 mm y-travel: 1200 mm z-travel: 1400 mm control: Sinumerik 840 D sl Siemens tool taper: HSK- A 100 no. of tools in the magazine: 117 Stück size of pallet: 1.000 x 800 mm numbers of pallets: 2 rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2200 kg turning speed range: 7.200 U/min max. torque on the spindle: 1.666/1.273 Nm power capacity - milling spindle: 75/64 kW weight: 34 t dimensions: 7,0 x 5,8 x 4,0 m 4 axis horizontal machining centre in perfect condition Only 1600 h spindle running time First installation 2022 - 4x disc magazine for 117 HSK-A 100 tools - two pallets with installation station - pallets with six fluid connecting points - Chip conveyor - 2x spiral chip conveyor - Air though spindle - oil skimmer - coolant gun - hydraulic system for part clamping - touch probe Renishaw - package for higher machining accuracy - coolant fil ...

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor --------------------------------------------------- Machine still in operation, available for viewing! --------------------------------------------------- Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK  ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: Heidenhain iTNC 530 tool taper: SK 40 total power requirement: 34 kVA weight of the machine ca.: 4810 kg dimensions of the machine ca.: m Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width x ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Graphics control C55 D Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with elek. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weigh ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D Graphics Controller Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V /  ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D graphics control Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz  ...

Frost control equipment in viticulture or horticulture. New equipment has never worked has been used 2 times 15 minutes as part of demonstrations Auction-ID: A3-46114-36488

Sold without power supply Auction-ID: A1-51267-4175

With APS control module Auction-ID: A1-51267-588

Auction-ID: A1-51267-3007

Sold with 1 mains power supply and 3x UMP2 Auction-ID: A1-51267-5245

18 meters working width 5 Section 1000l capacity Operating Auction-ID: A3-46114-11433

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of Lo ...

Genuine JCB 401/V6319 Radio Control Kit /Remote Control JCB 5.5-21/555-210R. Fit to the following JCB Telescopic Handlers 5.5-21 / 555-210R ROTATING TELEHANDLER 5.5-26 / 555-260R Consists of items: 401/V6319, 401/V6297, 728/F0332, 333/E6499, 333/E9530, 401/P8583, 400/B1334, 401/P9004. Auction-ID: A1-50216-66

Uniloy Milacron AQS2-810 PDR SGS Uniloy Leakage Control (2014) 8-head, side-shift, high-throughput leak tester designed for continuous inline inspection of HDPE/PP bottles. Featuring BMC Controls AQS2-810 Conveyor Applications: HDPE dairy bottles, juice bottles, household chemical bottles, personal-care bottles, and any blow-molded container requiring high-speed leak verification Auction-ID: A1-51927-106

Anti-bird pin stx304-50 100% stainless steel, 120 pieces per box, 10 boxes total Auction-ID: A1-47452-1301

Anti bird pin stx315-50 100% stainless steel against Seagulls, 60 per box, total 12 boxes Auction-ID: A1-47452-1302

Out of Service Control System Auction-ID: A1-51925-27

Anti-bird pin stx302-50 100% stainless steel, 120 pieces per box, total 40 boxes Auction-ID: A1-47452-1300

Pallet included Auction-ID: A1-50943-485

BILLION - Dixit 4 - SN 06315351 (Broken emergency stop button) Injection molding machine control screen Auction-ID: A1-51953-148

QUANTUM MACHINES Q250_EU QSwitch with Fisher Connector_EU QSwitch is a versatile low-frequency signal routing box that integrates seamlessly with your existing setup. Auction-ID: A1-51953-8

Type: HB-FB51, Voltage: approx. 24 VDC, Power: approx. 30 W. For more details, see photos of the nameplate. Auction-ID: A7-51948-197

- 1x stainless steel control box with Festo pneumatic valve block - 1x stainless steel control box with 3 Pilz PNOZ X3 safety relays - 1x industrial brake resistor unit with 2 cylindrical resistors in ventilated metal housing. - Pallet included Auction-ID: A1-50943-434

PALAS Mas-Q-Check + Pump + Mas-Q-Head + Accessories The Mas-Q-Check was developed by Palas to test protective masks quickly, simply and yet appropriately before use Auction-ID: A1-51953-133

A total of 2 pieces, including a control unit, Type: SINAMICS CU320-2 DP, and a control system, Type: SIMOTION D435, Power supply: 24 V DC. See photos for more details. Auction-ID: A7-51948-222

ECA Group - Loop Controller PN 20549SI-1 This tool is designed to measure the key characteristics of the fire detection system's CFD element loops: Core strength measurement Measurement of the insulation resistance between the core and the shielding braid Auction-ID: A1-51953-18

CARL ZEISS OPTOTECHNIK - T-SCAN 20 + T-CONTROL 20 + T-TRACK 20 The T-SCAN 20 is a handheld 3D scanner produced by ZEISS Auction-ID: A1-51953-11

LOT VIDEMUS Showcontrol System Server + MEDIALON Embedded Show Controller + DATATON allows you to compose and manage all the multimedia content of your show: videos, still images, animations, graphics, video acquisitions, audio, Auction-ID: A1-51953-16

SCORTEX - SPARK MULTIVIEW 46 With 8x Swivellink Spark Multi View performs high-performance inspections at a speed of up to 3 parts per second Auction-ID: A1-51953-99

ZINSER 2425-I/3600 CNC Plasma Cutting Machine Year of construction 2017 With Hypertherm XPR300 plasma system incl. bevel head incl. Hypertherm ProNest software The facility is in a very well-maintained and functional condition and is ready for immediate use. Equipped with the modern Hypertherm XPR300 high-performance plasma system for high-precision cutting work with excellent cutting quality. Particularly noteworthy is the integrated bevel head, which enables automatic weld seam preparation and bevel cuts. The cutting head can be swivelled in automatically. Technical equipment: • ZINSER CNC plasma cutting machine type 2425-I / 3600 • Hypertherm XPR300 plasma source • Hypertherm XPR VWI Interface • CNC control with touch operation • Automatic Bevel Head • Cable towing system • Extractable cutting table • ProNest nesting software included Maximum cu ...

industrial control cabinet / control cabinet equipped with a Siemens frequency converter and various electrical control components. Pallet included Auction-ID: A1-50943-420

Type: SQ23382.00. Instruction manual available. Voltage: 400–480 V, 50/60 Hz, Connected load: 12 kVA. For more details, see photos of the nameplates. Auction-ID: A7-51948-40

BYK-7070 Type 345000016 Color Control Handheld Spectrophotometer This instrument combines a spectrophotometer and a fluorometer in one handheld device. For the first time, color and brightness at 60° are measured Auction-ID: A1-51953-3

TSING-STANDARD XPENG - MCGS XTQM1007 Vehicle Motor Controller Test Auction-ID: A1-51953-118

Pallet included Auction-ID: A1-50943-465

A total of 2 pieces, Type: CP6900-0001-0000, Display: 10.1 inches, Touch screen, Power supply: 24 V DC. See photos for more details. Auction-ID: A7-51948-212

With approx. 11 servo drives, Types: Drive 4003, Drive 4009, Drive 4020, Voltage: approx. 400 V. For more details, see photos of the nameplates. Auction-ID: A7-51948-94

Type: SQ23382.00, Control type: ST214. Voltage: 400–480 V, 50/60 Hz. For more details, see photos of the nameplates. Auction-ID: A7-51948-41

2x Philips PR 1613 digital weighing indicators with display and control panel. 1x CAS NT-570A digital weighing indicator, suitable for industrial weighing systems. 1x Klöckner-Moeller PS3-DC industrial control module, 24 V DC, with digital inputs and outputs and RS485 connection. 1x Gröninger Cleaning Systems stainless steel control box 1x Pallet included Auction-ID: A1-50943-483

MAE CONTROLS - C311R Resonance 58E0035-C Electronic Resonance Precision Instruments Auction-ID: A1-51953-175