temperature control unit used for sale

Control cabinet for ELB surface grinding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 950 mm, 850 mm, 650 mm

CNC Universal Machining Center DECKEL MAHO DMU 95 monoBlock NEW DMG Design With track control Heidenhain TNC 640 Year of construction: 2024 Travel: X 950 Y 850 Z 650 Speed range: 0 – 20000 rpm infinitely variable (HSK 63) With the following accessories: NC swivel rotary table 1000 mm x 750 mm clamping surface 3 D Probe Heidenhain TS 460 Vertical tool changer with 120 magazine positions (HSK 63) Tool breakage detection Chip flushing in workroom door Chip rinsing gun with pump 1 bar/40 l min Blowing air d.d. spindle center Accuracy Package Application Tuning Cycle MPC Machine Protection Control Net Service App, Service Agent Operating mode 3 + 4 Electronic handwheel IKZ 40 bar with paper belt filter Chip conveyor Rotoclear Coolant Setup Spindle Oil Cooler Oil mist extraction 3-Piece Height Adjustable Machine Shoes Control cabinet cooling unit (Rittal)  ...

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

Key data: 3000 mm, 800 mm, 800 mm

German Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travel X/Y/Z: 3000 / 800 / 800 mm. 4-axis swivel head – PREPARATION FOR 5-AXIS MACHINING – 36-speed tool magazine – SK40 – 20–9000 rpm – 30 kW – IKZ 20 bar – 450 l tank – chip conveyor – Ethernet – central lubrication – Renishaw preparation. Condition: Tool changer overhauled. Machine in good condition and ready for demonstration under power. English Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travels X/Y/Z: 3000 / 800 / 800 mm. 4-axis swiveling head – PREPARED FOR 5-AXIS MACHINING – 36-position tool magazine – SK40 – 20–9000 rpm – 30 kW – 20 bar through-spindle coolant – 450 L tank – Chip conveyor – Ethernet – Central lubrication – Renishaw probe preparation. Condition: Tool changer overhauled. Machine in good workin ...

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

Mazak VTC 800/30SR CNC Bearbeitungszentrum (2009) Hersteller: Mazak Typ:VTC 800/30SR CNC Bearbeitungszentrum Baujahr: 2009 Zustand: gebraucht, unter Strom in Produktion Betriebsstunden: 34.000h Spindeldrehzahl 18.000 U/min Werkzeugmagazin 48 Werkzeuge Weitere Informationen folgen.

POSmill E 1100 Bearbeitungszentrum ITNC 530 (2014) Hersteller: POSmill Typ: E 1100 Bearbeitungszentrum ITNC 530 Baujahr: 2014 Zustand: gebraucht, gut unter Strom vorfühbereit Einschaltstunden ca. 43.559h Spindelstunden ca. 15.789h Steuerung ITNC 530 Verfahrwege POsmill E 1100 X-Achse 1100 mm Y-Achse 600 mm Z-Achse 510 mm Eilgang bis 32 m/min Kugelgewindetriebe bis 50 mm Vorschub 1 ? 10.000 mm/min. Werkzeug-Aufnahme ISO 40 Drehzahl, max. 10.000 U/min. Leistung, max. 25 kW Abstand Spindel/Tisch 120-630 mm Abmessung Tisch 1300 x 600 mm Abstand Boden/Tisch ca. 855 mm Belastung, max. 1.000 kg Abstand Spindel/Ständer ca. 600 mm Anzahl Werkzeuge 60 Stk. Werkzeuglänge, max. 300 mm Werkzeug-Gewicht, max. 8 kg Wechselzeit ab 5,5 s Gewicht 8.500 kg ? Original Dokumentation ? 3D Messtaster ? Bandfilteranlage mit IKZ 20 bar ? Wasserpistole ? Luftpistole ? Maschinen ...

Akira Seiki Dugard 1350 XP Bearbeitungszentrum (2017) Hersteller: Akira Seiki Typ: Dugard 1350 XP Baujahr: 2017 Steuerung: Heidenhain iTNC640 Zustand: gut, gebraucht Spindelstunden: 6300h Verfahrweg X-Achse: 1.350 mm Verfahrweg Y-Achse: 640 mm Verfahrweg Z-Achse: 660 mm Eilgang X-Achse: 33 mm/min Eilgang Y-Achse: 33 mm/min Eilgang Z-Achse: 25 mm/min Werkstückgewicht (max.): 2.300 kg Gesamtlänge: 3.800 mm Gesamtbreite: 2.495 mm Tischbreite: 1.500 mm Tischlänge: 600 mm Tischbelastung: 2.300 kg Spindeldrehzahl 20 -12000 U/min Werkzeugmagazin 36 Werkzeugaufnahme SK 40 Kratzspäneförderband Infrarottaster TS 460 Werkzeugvermessung TT160 IKZ 20 bar Dokumentation/Handbuch

Kunzmann WF 650 5-Achs-Bearbeitungszentrum Simultan (2009) Hersteller: Kunzmann Typ: WF 650 5-Achs-Bearbeitungszentrum Simultan Baujahr: 2007 Inbetriebnahme: 2009 Zustand: gebraucht, sehr gut Maschine EIN: 46181 h Spindelstunden: 12959 h Steuerung: Heidenhain iTNC 530 Software-Paket 1 zu iTNC 530 X ? Achse 650 mm Y ? Achse 500 mm Z ? Achse 450 mm Schwenkbarkeit des Vertikalfräskopfes -5° + 95° NC-Einbaurundtisch Ø 630 mm Tischbelastung 350 kg Spindeldrehzahl 12.000 U/min Werkzeugaufnahme SK40 Werkzeugwechsler mit 20 Werkzeugen IKZ: Werkzeugspanner mit Kühlmittelzulauf und Ausblaseinrichtung durch die Spindel Förderleistung 25l/min bei 40 bar Wahlweise Wasser/Luft durch die Spindel Papierbandfilter Gesteuerter CNC-Fräskopf (B-Achse) Anrüstsatz für Tastkopf TS 640 3-D-Taster mit Infrarot-Übertragung Abmessungen LxBxH ca.: 3,1 x 2,4 x 2,45 m Gewicht ca 6. ...

Wagner WMC 1800 CNC Bearbeitungszentrum (2013) Hersteller: Wagner Typ: WMC 1800 Baujahr: 2013 Siemens 828 Steuerung Zustand: gut, gebraucht, unter Produktion X-Weg 1800mm Y-Weg 900mm Z-Weg 700mm Werkzeugaufnahme SK40 IKZ 25 bar mit Bandfilteranlage Werkzeugvermessung Handrad Dokumentation Ohne Werkzeug

Posmill C1050 3 Achs Bearbeitungszentrum (2010) Hersteller: POSmill Typ: C1050 3 Achs Bearbeitungszentrum (2010) Baujar: 2010 Maschinenart: 3 Achs Bearbeitungszentrum. Zustand: unter Strom, sofort einsatzbereit. Betriebsstunden: ca. 29800h Spindelstunden: ca. 9000h Steuerung: iTNC 530. Spindeldrezahl: 10.000U/min Werkzeugmagazin: 30 x-Achse (mm) 1.050 y-Achse (mm) 530 z-Achse (mm) 630. Abstand Spindel/Tisch (mm) 85-715 Zubehör: Dokumentation Späneförderer Kühlmitteleinrichtung Werkzeugwechsler 30 pos. Linearmassstäbe in allen Achsen X / Y / Z 3D-Taster elektr. Handrad . Ab sofort verfügbar.

MTCut V110 4 Achs Bearbeitungszentrum (2012) Hersteller: MTCut Typ: V110 Baujahr: 2012 Zustand: gebraucht, sehr gut, in Produktion. Einschaltstunden: 14150h Spindelstunden: 3710h Steuerung: Itnc 530 Verfahrbereich. X x Y x Z = 1100 x 640 x 610mm ? 30-fach Werkzeugwechsler ISO 40 ? 4. Achse, 200mm Futter mit hydr. Werkstückklemmung und 350mm Planscheibe. ? Innere Kühlmittelzufuhr 50bar ? Spindelkühlung ? Meßtaster ? Abmessungen ca. L x B x H 3,2 x 3,2 x 3,1m (Transporthöhe 2,5m).

Mikron VCE600 Pro CNC Bearbeitungszentrum Hersteller: Mikron Typ: VCE600 Pro Zustand: gebraucht, unter Strom und in Produktion Steuerung: Heidenhain iTNC 530 Inkl. Werkzeug Weitere Informationen auf Anfrage

Mori Seiki DuraVertikal 5080 3Achs Bearbeitungszentrum (11/2006) Hersteller: Mori Seiki Typ: DuraVertikal 5080 Baujahr: 11/2006 Zustand: gebraucht, gut, in Produktion

DMG Mori CMX 600V CNC Bearbeitungszentrum (2018) Hersteller: DMG Mori Typ: CMX 600V CNC Bearbeitungszentrum Baujahr: 2018 Zustand: gebraucht, unter Produktion Einschaltstunden: 514h Spindelstunden: 142h Weitere Informationen folgen

Two identical QAVERtec testing and measuring machines for quality control of freshly produced concrete products are offered. Facing/core porosity measuring range: 0%-100%, porosity resolution: 1%, height measuring range: 35mm-130mm, height measurement resolution: 0.1mm, weighing range: 0kg-25kg, scale resolution: 0.01kg, density determination: calculation of bulk density, max. vacuum: 900mbar, tolerance: +/-2%, working radius: 5m, PC unit: CX5130-0175, operating system: Windows 10, display: 19 inches. Machine dimensions X/Y/Z: 1550mm/1150mm/530mm, weight: 120kg. Documentation available. Inspection by arrangement is possible.

A used control cabinet with Elau interior see photos If you are interested, more information

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm CNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 10.000 U/min drive capacity - spindle motor: 13 kW feed stepless: 20.000 mm/min rapid traverse: 25 m/min tool change unit: 20 Pos. coolant: IKZ 20 bar voltage: 400 V total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,55 x 2,30 x 2,25 m chip conveyor: 3,90 x 0,95 x 1,60 m coolant tank: - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fanuc Type: A16B-3200-0330 Item condition: used You can find more Fanuc robots and components in our shop! In some cases, larger quantities are also in stock.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

Encoders, 2 pcs. Heidenhain, ROD 426.000B-1500 Id.Nr. 2295 434 KL, Ser.Nr. 7412 736V02, φ 56mm 2 pcs. TR Electronic GmbH, D-78647 Trossingen Type: CE100M, Art. No. 101-00024, SN 0125 Voltage : 11-27VDC, steps/revolution: 4000/4096, φ approx. 105mm, unused -new

Key data: 1050 mm, 530 mm, 510 mm

CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

For sale: a Heinzmann TECJET (gas control valve) for the gas intake section of a gas engine, as shown in the photos. Like-new. Barely used condition. Please send any questions via email.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: total power requirement: --- kW weight of the machine ca.: 6,8 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer DMG-MORI Model DMF 260 Year 2011 CNC SIEMENS SINUMERIC 840D Table Table surface 2,900 x 700 mm. Maximum weight on table 2,150 kg. Routes and advances Longitudinal (X-axis) 2,600 mm Transverse (Y-axis) 700 mm Vertical (Z-axis) 700 mm Fast forward of the axes (X,Y,Z) 40 m/min Working progress of the axes (X,Y,Z) 40 m/min Axle acceleration 4 m/s2 Head Revolutions 14,000 mm/min SK 40 Head Cone DIN 69872 Main engine power 18.4 / 14 kW Automatic tool loader No. of Charger Tools 30 Maximum tool length 300 mm Maximum tool weight 6 kg. Maximum tool diameter with adjacent free positions 130 mm Maximum tool diameter without adjacent free positions 80 mm Equipment Refrigeration 40 Bar / 600 l. INCLUDED Longitudinal chip evacuator INCLUDED Coolant cleaning gun INCLUDED Portable steering wheel INCLUDED Direct Measurement System INCLUDED Machine hours  ...

Key data: 800 mm, 800 mm, 800 mm

DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Interchangeable Table – Used For sale is a used DMG MORI DMC 80H duoBLOCK horizontal machining center. The machine is currently still in productive use and is reliably used in series production. It is mainly used for processing steel and cast iron. Condition: Fully functional and operational. Viewing under power possible by arrangement. Equipment: 4-axis machining Horizontal design for efficient chip removal Changing table (pallet changer) for reduced non-productive times duoBLOCK design for high stability and precision Tool Changer Generous working space for complex components Further details on the equipment are available on request Control manufacturer: Siemens Control model: Sinumerik 840D Workpiece weight (max.): 1,200 kg Total height: 3,100 mm Overall length: 4,850 mm Overall  ...

Key data: 700 mm, 400 mm, 330 mm

A FANUC Robodrill α-D21LiA5 High Power vertical machining centre from 2014 is for sale. No repair machine – no known defects – ready for immediate use. The machine features the powerful FANUC Series 31i-B5 controller, a 21-fold tool changer, MAS BT30 tool holder and extensive equipment with a Renishaw touch probe and tool measurement. This machine also has a 100 mm stand raiser. The machine is ideal for the fast and precise machining of individual parts and series and is very productive, especially due to the high travel and feed speeds. Technical data Manufacturer: FANUC Model: Robodrill α-D21LiA5 Version: High Power Version Year of Make: 2014 Control: FANUC Series 31i-B5 Weight: approx. 2,200 kg Connected load: approx. 11 kVA Travels: X-axis: 700 mm Y-axis: 400 mm Z-axis: 330 mm Machine table: Table size: approx. 850 × 410 mm 3 T-slots ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: total power requirement: --- kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA:  ...

CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain TNC 640 Year of Make: 2015 Internal machine number: 76 Travels: X-axis 600 mm Y-axis 400 mm Z-Axis 400 mm Z-Axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm

X-axis 1250/420 mm Y-axis 510/315 mm Z-axis 480 mm B-axis 220° C-axis 360° Drive power 19 kW Max. spindle speed 12000 rpm Tool holder SK40 33 tool positions

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm

Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...

FEATURES: • Longitudinal travel 1020 mm • Cross travel Y 510 mm • Vertical travel Z 575 mm • SIEMENS CNC Type • Table length 1200 mm • Table width 500 mm • Max. Authorized weight 800 kg • Number of tools 30 • ISO 40 spindle taper • Max spindle speed 8000 rpm • Spindle motor power 15 kW • Length x width x height 3275 × 2948 × 2996 • Weight 7500 kg

Key data: 760 mm, 640 mm, 760 mm

X-axis travel:760 mm Y-axis travel:640 mm Travel Z-axis:760 mm Control manufacturer:FANUC Control Model:Series 18i-MB Workpiece height (max.):800 mm Workpiece weight (max.):500 kg Spindle speed (max.):6,000 rpm Number of slots in tool magazine:120 horizontal machining center with patette changer, two pallets 500x500, 120 tool holders, touch probe Tool length:400 mm Tool weight:15 g Equipment:Chip conveyor, documentation/manual

Horizontal single-stage exhaust air scrubber with integrated liquid tank, packing and mist eliminator for cleaning exhaust air containing acids and lyes. Principle: A scrubbing liquid is injected into the horizontally inflowing exhaust air in a circuit. Water-soluble impurities are washed out by adding alkalis or acids.

Control touch panel Siemens MP277 10 SD - 4 x Siemens Sirius power contactor 3RT1015-1BB42 - 2 x Siemens Sirius power contactor 3RT1034-1B - 2 x ABB S201 B10 circuit breaker - Control cabinet lighting Bosch Compliant 2002/95/EC - Switch cabinet socket 18A / 250V - Control cabinet lighting RoHS Rittal automatic 250V / 26W - Service unit Festo LFR D Mini - Festo valve terminal MPAL - VI - Pilz 2 channel safety relay s2 / 24 V dc / 2 x safety contacts - ABB S201-C4 automatic circuit breaker - Siemens selectivity module SITOP PSE2000U - Siemens Sirius circuit breaker 2.2-3.2 A - Siemens Sirius Innovation motor protection switch 3RV1011-0GA10 / 0.45 - 0.63 A 3RV1 - 2 x Siemens Sirius thermal motor-protective circuit-breaker 3RV1011-1DA10 / 3.2A 690 V AC DC - 1 x Siemens Sirius circuit breaker 3RV1011-1FA10 / 3.6 - 5A - 2 x Siemens Sirius motor protection switch 3RV2021-4DA10 / 20 - 25 A 3RV1  ...

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 2x compressed air diaphragm pumps Almatec Futur 50T / 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125), 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

The cabinet (hydrochloric acid tank module) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as with a compressed air diaphragm pump. The tank module was used to convey the delivered chemical through the filters into a storage tank. The equipment is of very high quality and can be used for many chemicals.1x Almatec Futur 50T, valve and filter units, sampling box, flow controller with pressure transducer, flushing by spray gun, compressed air unit and E cabinet.