temperature control unit used for sale

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

Dräger Protection Unit 6904409 complete unit Year of construction 2013 The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

a pasteurization unit with pouch packer for liquid product Find more here - /

Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005)

Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Refer to code 1172 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Manufacturer: Uniteam, Type: Unicawood KR, Year: 2011, Control: yes, Year :2011

Size: 520 mm Equipments: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold

Size: 480 x 650 mm Equipments: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Size: 520 x 740 mm Equipments: 1 cam left and right 2 X Mounting Rings 2 Perforating arm 1 X Inking Unit 1 X Numbering Shaft

table diameter: 500 mm table load: x t table height: x mm spindle diameter: 0 mm x-travel: 500 mm y-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

UNITRONICS Display V570-57-T20B Functional, Year of build: Unknown, Construction year: unknown, Type of control: conventional, Stock location: 75242 Neuhausen DE, storage location: 75242 Neuhausen, Coutry of origin: -, Country of origin: -, Delivery time: immediately available, delivery time: immediately available, Freight base: in stock, Price: On demand

Unitech Boot wash station Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph

Min. schuifraamhoogte: 200 mm Max. Schuifraamhoogte: 460 mm 230v / 50 Hz Gassenfilters: Type A (Organisch) / Type BE (zuur) , Type F (Formaldehyde) en Type K ( Amoniak en Amines)

Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability

1 UNITECH stenter type Redevo, year 2014, width 220 cm, 6 fields, gas heating, combined pin and clip horizontal chain, BIANCO finishing padder, MAHLO weft streigthener

General SKU316S537 LocationBarneveld MakeGericke Typeingredënten dosering Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm Information Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m CEcheck Weight1000kg Extra Specificationsfitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pitch: 30mm length:600mm with rib ...

Engine Brand: IHC/CASE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ihc-case-p110-power-unit-u sed/613, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DJA-P110; Transport weight [kg]: 710

ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg  ...

Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!

1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor

1500L Mixing Vessel with Mixer Vertical stainless steel tank 1500L Gross Volume Manufacture: Unitstaal A/S Denmark Year of Manufacture: 2000 Diameter Approx 1350mm Height Approx 2300mm (Including Motor) Bottom Outlet DIN Butterfly Valve Top Manway Double Walled with Insulation Pressure Gauge on Top Sight Level Sight Tube Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU316W644 LocationBarneveld CEcheck MakeEMDE TypeEntleer-u. Forderanlage/ FSH 315 X 315 X 120/ BE 1500 Main Features MaterialStainless steel Motor0.62 KW Specified Features - Miscellaneous transport MaterialStainless steel 1.4306 (304L) Miscellaneous transport Capacity127 l (Hopper) Information No.A111.0990/ A111.0990-1.1 Year of construction2011 Mounted in framecheck With switchgearcheck Floorspace1.7 x 2.8 m Total height2.21 m Weight550 kg ATEX compatiblecheck Extra SpecificationsFibro feeder length: 2 meters Thickness of the feeder: 12 cm Width of the feeder: 38 cm Miscellaneous transportEmde NassauConveying systems > Miscellaneous transportBrand > Emde Nassau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

General SKU294W556 LocationBarneveld CEcheck MakeAtec Pharmatechnik TypeT-195L Main Features MaterialStainless steel Volume230 Ltr. Motor2.2 KW Specified Features - Miscellaneous MaterialStainless steel 1.4404 (316L) Miscellaneous Closed stirring vesselcheck Capacity230 l Vessel sizes600 x 700 mm Dished bottomcheck ManholeDN300 Top connectionscheck OutletDN40 Max. temperature5°C/95°C Information No.309220-01 Year of construction2003 Mounted on legsOn wheels With switchgearcheck Floorspace1,80 x 1,30 m Total height2,0 m Extra SpecificationsWith 2x Fristam centrifugal pumps 2x CIP dosing pumps Atec condensor stainless steel control cabinet and instrumentation MiscellaneousATECMiscellaneous > MiscellaneousBrand > ATEC What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU355S835 LocationBarneveld CEcheck MakeVomatec BV (NL) TypePilot plant 19.096 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4404 (316L) Processing vessels Capacity80 Motor2.2 Information No.0211-025-19096 Mach.No.0211-025-19096 Year of construction1996 / 2002 Floor space3.3x1.5 M Total height2.05 M Weight2000 Kg Extra Specificationsthis skid contains a Vomatec BV tank of 80 ltr with heating jacket, a worm pump brand van Wijk en Boerma, 0.14 m3/h, a Vomatec BV heat exchanger 0.25 m2 heated surface. 2 buffer tanks under which 3 pumps are mounted. 1 Lenze screw pump, 1 Speck pump VH0040-41-10-000, 1 Lenze rotary lobe pump 8F4-981H, 1 Vomatec scraped heat exchanger, 1 Bran Luebbe dosing pump type N-P31, 1 small vessel of which the agitator is missing. and electrical control of the whole. : P ...

Máquina destroqueladora para el pelado del trabajo de troquelado de forma automática. No es necesario tener moldes para la operación, operando con pines que se seleccionan de forma sencilla en la preparación del trabajo. Formato máximo de pliego: 1080x780 mm Tamaño máximo destroquelado: 440 x 420 mm

Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.

Power cable, solar cable, fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, data line, video cable -Manufacturer: Lapp Kabel, data line on cable drum -Type: UNITRONIC Li2YCY PiMF 5x2x0.5 ROHS -Cable drum: schill IT 380.RM -Cable length: 97 m -Number: 7x cable drums available -Price per piece -Dimension: 410/260/H450 mm -Weight: 21 kg/pc.

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Vacuümhefunit - Type: V01174 - Maximaal hefvermogen bij 60% werkvacuüm: 1650 kg - Gewicht: 700 kg - lengte: 10,3 meter - breedte: 500 mm - hoogte: 950 mm

Technical details Manufacturer: GS-System (Germany, partially visible) Model: 528 (marking on unit) Type: Industrial oil temperature control unit Configuration: Single-circuit thermal control system Heating: Electric oil heating system Control: Analog gauges (temperature and pressure) with manual switches System: Integrated oil circulation (internal pump assumed) Cooling: Ventilated housing for heat dissipation Connections: Fluid inlet and outlet for thermal oil circuit Application: Tool heating, mould temperature control, and industrial thermal processes Condition: Used, with corrosion, wear, and partial control panel damage; functionality untested Dimensions and weight (approx.) Length: 1200 mm Width: 800 mm Height: 1200 mm Weight: 600 kg Auction-ID: A7-46498-166

Technical details Manufacturer: Robamat Automatisierungstechnik GmbH (Austria) Model: Thermocast 3212 Type: Industrial oil temperature control unit (thermoregulator) Year: 2002 Max temperature: 250°C Voltage: 400 V / 50 Hz Current: 35 A Control voltage: 24 V DC Control: Dual digital control panels System components: - Heating unit (thermal fluid heater) - Circulation pump - Heat exchanger - Pressure gauges - Main isolator switch Application: Mould temperature control, injection moulding, die casting, and industrial thermal processes Condition: Used, with wear and partial disassembly; functionality untested Dimensions and weight (approx.) Length: 1200 mm Width: 800 mm Height: 1300 mm Weight: 350 kg Auction-ID: A7-46498-170

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

Wittmann temperature control unit

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

Key data: 300 °C, 2 kW, 144000 W

used oil temperature control unit with 5.5 kW pump max. pre-fuse 80 A electr. Connection 35 kW little used

Key data: 100 °C, 8 kW, 30 W

HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg Find more here - / Contact us at -

Key data: 140 °C, 10 kW

Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended

Key data: 140 °C

Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 160 °C, 20 kW

Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 140 °C, 10 kW

Temperature control unit for tools - Wittmann Tempro Plus (15 pcs.) Year of manufacture: 2009-2018 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request