temperature control unit used for sale

Single piece loading dimensions: 250 x 200 x 100 mm Auction-ID: A7-49226-403

Detailed manual attached Indoor Unit Model: AP12RT NSJ Model Code: S3NM12JA1YB Phase / Power supply: Single phase Voltage rating: 220–240 V~ Frequency: 50 Hz Maximum Current (Internal): 0.2A Maximum Pressure (High): 4.2 MPa Maximum Pressure (Low): 2.4 MPa Refrigerant: R410A or R32 Refrigerant Quantity: (Not indicated on the label provided) Degree of protection: IPX4 Markings/notes: CE, information symbols; Contains fluorinated gases Loading dimensions: 900 x 400 x 250 mm Auction-ID: A7-49225-107

Detailed manual attached Single piece loading dimensions: 1050 x 360 x 300 mm Auction-ID: A7-49225-215

Detailed manual attached Model: LG AC09BK UA3 Alternative model: S3UM09JARMA Type: Split room air conditioner / split air conditioner Power supply: Single-phase Voltage rating: 220–240 V~ Frequency: 50 Hz CAPACITY Cooling: 2 500 W (8 151 kcal/h) Heating: 3 300 W (2 839 kcal/h) BTU Capacity/hr: 8 538 BTU/hr (cooled) / 11 288 BTU/hr (heated) NOMINAL CONSUMPTION Cooling power consumption: 656 W Heating power consumption: 800 W Cooling current consumption: 3.30 A Heating current consumption: 4.00 A MAXIMUM CONSUMPTION Maximum cooling power consumption: 1 400 W Maximum heating power consumption: 1 600 W Maximum cooling current consumption: 6.00 A Maximum heating current consumption: 7.00 A MAXIMUM PRESSURES High pressure: 4.2 MPa Low pressure: 2.4 MPa REFRIGERANT Type: R32 Quantity: 0.70 kg CO₂ equivalent: 0.473 t OTHER INFORMATION Degree of protection:  ...

Detailed manual attached Model: LG AC12BK UA3 Alternative model: S3UM12JARMA Type: Split room air conditioner / split air conditioner Power supply: Single-phase Voltage rating: 220–240 V~ Frequency: 50 Hz CAPACITY Cooling: 3 500 W (3 011 kcal/h) Heating: 4 000 W (3 442 kcal/h) BTU capacity/hr: 11 950 BTU/hr (cooling) / 13 658 BTU/hr (heating) NOMINAL CONSUMPTION Cooling power consumption: 1 080 W Heating power consumption: 1 050 W Cooling current consumption: 4.70 A Heating current consumption: 4.70 A MAXIMUM CONSUMPTION Maximum cooling power consumption: 1 400 W Maximum heating power consumption: 1 600 W Maximum cooling current consumption: 6.00 A Maximum heating current consumption: 7.00 A MAXIMUM PRESSURES High pressure: 4.2 MPa Low pressure: 2.4 MPa REFRIGERANT Type: R32 Quantity: 0.70 kg CO₂ equivalent: 0.473 t OTHER INFORMATION Degree of protec ...

Detailed manual attached Single piece load size: 115 x 115 x 55 mm Auction-ID: A7-49226-120

Detailed manual attached Single piece loading dimensions: 640 x 840 x 300 mm Auction-ID: A7-49225-172

Detailed manual attached Single piece load size: 115 x 115 x 55 mm Auction-ID: A7-49226-377

Detailed manual attached Model: LG AC09BK UA3 Alternative model: S3UM09JARMA Type: Split room air conditioner / split air conditioner Power supply: Single-phase Voltage rating: 220–240 V~ Frequency: 50 Hz CAPACITY Cooling: 2 500 W (8 151 kcal/h) Heating: 3 300 W (2 839 kcal/h) BTU Capacity/hr: 8 538 BTU/hr (cooled) / 11 288 BTU/hr (heated) NOMINAL CONSUMPTION Cooling power consumption: 656 W Heating power consumption: 800 W Cooling current consumption: 3.30 A Heating current consumption: 4.00 A MAXIMUM CONSUMPTION Maximum cooling power consumption: 1 400 W Maximum heating power consumption: 1 600 W Maximum cooling current consumption: 6.00 A Maximum heating current consumption: 7.00 A MAXIMUM PRESSURES High pressure: 4.2 MPa Low pressure: 2.4 MPa REFRIGERANT Type: R32 Quantity: 0.70 kg CO₂ equivalent: 0.473 t OTHER INFORMATION Degree of protection:  ...

Never used / sold in original carton Auction-ID: A1-49235-432

Never used / sold in original carton Auction-ID: A1-49235-1336

Detailed manual attached Single piece loading dimensions: 1050 x 380 x 380 mm Auction-ID: A7-49225-180

Never used / sold in original carton Auction-ID: A1-49235-505

Inverters Part Number: ACS800-704LC-1370-7 Manufacturer: ABB The part is technically in good condition, but this is a used item that shows or may show signs of wear. Internal numbers: 397695573779 622 060 257398512065 622 059

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M5 - M24 turning speeds: 70 - 200 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous met ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 0 bar liter capacity: 0 l power capacity: 4 kW operating pressure: 150 bar : weight of the machine ca.: 200 t dimensions of the machine ca.: 1,1 x 0,7 x 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,18 kW volt: 400/230 V ampere: 0,6/1,05 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper bore: FETTE number: 2 thread pitch: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of knives: Fette z= Diameter: Fette mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mm material thickness: 0,8 - 5 mm Feed speed: 8 m/min. total power requirement: 10 kW weight of the machine ca.: 1,5 t Material width: 650 mm Material thickness: 0.8 – 5.0 mm Feed speed: 8 m/min Total power requirement: 10 kW Machine weight: approx. 1.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 850 mm total power requirement: 3,8 kW 5 to. Schleicher reel - max load: 5 to - Belt width: 1500 mm - Belt thickness: 1 mm - Year of construction: 23/04/92 - Voltage: 24/380 V 50 Hz - Power: 3,8 KW Including: Coil lifter, feed unit, control panel, hydraulic unit, control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: / mm plate length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

we sell two Frame 6B and C and new spare parts, as transition pieces, com ustion liners, blades and nozzles. Please ask for a quotation specificly. Thank you.

we sell one TM2500, 15 years old, 22 MW 50 / 60 Hz only test hours after 0 hours overhaul in operational condition, test repüorts and borescope report available More details available upon request from end users and buyers,

Inverters Model No.: ACS800-104LC-0700-7 +E205 Manufacturer: ABB The part is technically in good condition, but this is a used item that shows or may show signs of wear. Internal number: 622 056 257398513187 622 055 257398515598

feed pressure: ? 60 / 80 bar liter capacity: ? l power capacity: 4 kW tank: 250 l weight of the machine ca.: 0,3 t dimensions of the machine ca.: 900 1050 1100 (2100 ) mm Inclusive: - Hydraulic diagram ! - External valve block - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 160 / 180 mm Control: NC total power requirement: ? kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 500 x 230 x 270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 70 bar liter capacity: - l tank: 80 l power capacity: 2,2 kW weight of the machine ca.: 400 t dimensions of the machine ca.: 0,83 x 0,6 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M36 turning speeds: 30 - 150 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change ...

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

JUNG OTA 76 (optique) ist ein Teilapparat mit Reitstock, konstruiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Spitzenhöhe 76 mm, Spitzenweite 160 mm, Spindelaufnahme 3 CM. Technische Daten: Abmessungen L×B×H 720×210×215 mm. Ausgelegt zur Erzielung enger Toleranzen; geeignet für Präzisionsbranchen wie Optik, Uhrmacherei und Werkzeugmaschinenbau. Technische Daten ohne Gewähr

FEHLMANN AT 100 NC ist ein Teilapparat hoher Präzision, entwickelt für hohe Genauigkeit und Zuverlässigkeit beim Teilen/Indexieren. Betriebsdaten: Spitzenhöhe 100 mm; Länge 380 mm; Breite 160 mm; Höhe 300 mm; Eigengewicht 32 kg; Auflösung: °. Kernangaben: Eigengewicht 32 kg; Abmessungen LxBxH 380x160x300 mm. Zur Erzielung enger Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

OLAER CW 19 NBSQC ist ein Oelkühlgerät ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Abmessungen – Länge 700 mm, Breite 450 mm, Höhe 360 mm. Hauptspezifikationen: Anschluss 50 Hz 3x: 400 Volt; Leistung der Heizung 2 kW; Maschinengewicht ca. 48 kg. Ermöglicht enge Toleranzen; typische Anwendungen: Automobil, Werkzeugmaschinen, Hydraulik, Luftfahrt. Technische Daten ohne Gewähr

STUDER ist eine Kühleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten wie Durchmesser oder Verfahrwege sind nicht angegeben. Technische Hauptdaten: Eigengewicht 500 kg; Abmessungen L 1400 mm x B 1000 mm x H 2300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen und findet Anwendung in Branchen wie Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Maschinenbau Technische Daten ohne Gewähr

SCHAUBLIN ist ein Fräsapparat, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Bearbeitungsumfängen und technischen Daten liegen nicht vor. Er ermöglicht enge Toleranzen und eignet sich für Automobil-, Uhren-, Werkzeugmaschinen-, Luftfahrt- und Medizintechnikbranchen. Technische Daten ohne Gewähr

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg

sheet width: 1.250 mm plate thickness: 1,0 mm cutting speed: 10 m/min blade shaft - diameter: 70 mm Working width: 1,250 mm Sheet thickness, steel: max. 0.8 mm with 3 pairs of knives Sheet thickness, copper: max. 1.0 mm with 3 pairs of knives Knife shaft: Ø 70 mm Number of knife pairs: 3 Cutting / feed speed: approx. 10 m/min Power supply: 380 V Equipment: Manual longitudinal and cross-cutting line for sheet metal strips with rubber transport rollers. Knife shaft Ø 70 mm 3 pairs of knives Length measuring device with measuring scale Automatic and manual operation Brake motor Manual rotary shear for cross-cutting The RULI 120 / SBVA is a longitudinal and cross-cutting line designed for processing sheet metal strips. The machine enables longitudinal slitting and cutting to length and is particularly suitable for processing thin sheet metal. The sheet material is fed to the knife shaft vi ...

Sale from candelabra/lamp post factory liquidation. PlymoVent FM-35 welding fume exhaust unit. Arm first section = 400 cm Arm second section = 160 cm Arm Third section = 150 cm Support column height = 280 cm. Operational condition. Possible missing parts, damage. Unverified quality. Auction-ID: A7-49389-3

KAESER SIGMA AIR MANAGER 4.0, a higher-level compressed air management system for the central control and monitoring of a compressed air station. Version with large touch display and wall bracket. The system is used, among other things, to coordinate several compressors as well as connected compressed air preparation components. The device was installed and switched on at the time of the recording. Used version with signs of age and use. A further technical functional test was not carried out. Sale as shown. Auction-ID: A1-49382-83

Sameka SAM 65, No Fab 3504, Hydraulic power unit Auction-ID: A7-49053-192

Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph

Exiway Smart - Ambient emergency unit - fault reporting - SATI - IP42 | Schneider Electric - OVA59300 Exiway - Stand-alone emergency lighting unit - SATI panic control BAEH with LED fault reporting - 1 hour autonomy - Luminous flux 410 lm - IK07 - IP42 - H x W x D (mm) 240 x 122 x 45 - Fire resistance 850DEGC Schneider Electric has designed Exiway Smart: easy-to-install blocks for all professionals, with a unique footprint regardless of the type of block. The emergency units in this range have a sleek, modern design and guarantee easy commissioning and efficient maintenance for optimal comfort in your everyday life. The emergency lighting range covers all market needs as defined by the regulations. This ambient emergency unit is a stand-alone SATI emergency lighting unit with fault reporting. The SATI system makes it possible to highlight faults on the stand-alone block and to highlight  ...