136,416 used machines on RESALE, but how to find them? Machine Search
A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.
CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32
CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm
Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request
CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm
CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular
PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (
CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever
A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.
CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version
Semi-Automatic Shrink Packer – Smipack BP600 (2020) This Smipack BP600 is in excellent condition. It is a semi-automatic shrink-wrapping system featuring a pneumatic infeed pusher, a horizontally operated pneumatic sealing bar, and a single-chamber shrink tunnel integrated into a compact monoblock design. The machine is designed for low- to medium-output consumer packaging applications using LDPE shrink film. It is suitable for a wide range of rigid and semi-rigid products, including bottles, cans, jars, carton trays, and various industrial items. The BP600 is intended for grouping and packaging products in LDPE shrink film, with optional use of pads or trays depending on specific operational requirements. Technical Characteristics Manufacturer SMI Italy Manufacturer’s model Smipack BP 600 Manufacturing year 2020 Total operating hours Approx 700 Capacity upto 600 p ...
CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular
A gravimetric dosing and mixing unit for plastic granulate Motan is available. Dosing stations: 4, throughput capacity: approx. 150kg/h, reference bulk weight: 0.6kg/dm³, container volume: 4x18l. Machine dimensions X/Y/Z: approx. 600mm/650mm/920mm, weight: approx. 100kg. An inspection on site is possible.
Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg
Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.
Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.
I am selling a shocker - shocker ELEKTROLUX RBC 201. Functional. Price negotiable.
Professional fully automatic packaging system from a renowned European manufacturer consisting of 3 components: feed belt, fully automatic angle welder and shrink tunnel. The machines can therefore be operated together or individually. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. Feed belt GH 1000 / 400: -Speed infinitely adjustable. -Automatic / manual operation selectable. -Length approx. 1 m. -Usable width approx. 400 mm. -Adjustable side guide. -Height adjustable via machine feet. Fully automatic angle welder FP 6000 CS -The angle welder has several monitoring sensors, light barriers or photocells to control the automatic process, as well as mechanically adjustable product chicanes. User-friendly control panel with extensive functions and setting options such as automatic and set- ...
Professional packaging line from a renowned German manufacturer. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. -Packaging output up to approx. 16 packs per minute. -Dimensions of the welding rail approx. 580 x 440 mm. -Tunnel opening approx. width 510 x height 230 mm. -Maximum package size theoretically about L 580 x W 440 x H 230 mm. -Maximum film roll width 550 mm. -Perforation of the film via 2 adjustable needle rings possible. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. machine can be moved and locked with castors. -Approximate dimensions of the machine: length 2.5 x width 1.2 x height 1.6 m. -380 V/ 5.5 KW. Setting options on the display: tunnel temperature. -Welding temperature. -Conveyor belt transport time. -Roll ...
Compactor for SALE - good price! Producer - Pottinger Type - MP1900 Year of production - 2004 Power - 5.5 kW Condition - used in working condition (without reconstruction)
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg
Project number: 920239, Kettle: 280 litres, double jacket, Heating: steam, Weighing cells: Tedea-Huntleigh max 300kg, Pump: Unibloc-PD displacement pump, Flow meter: Endress + Hauser promass F, Indicator: Ian Fellows LUCID-76711, Recorder: Eurotherm Chessell paperless graphic recorder, Measuring device: Knick Stratos 2401 Cond, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 2000 x 1200 x 2000 mm
Kistler NC joining module with double station/spindle unit Kistler NCFH 60 servo press with feed carriage & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial double station/spindle unit for automated series production (e.g. friction welding or precision pressing). The system is characterized by the highest precision, integrated force-displacement monitoring (piezoelectric sensors) and an extremely robust design for continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electrical manufacturing or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces during the pressing process depending on the position. ...
Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic do ...
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg
The trailer delivered with all necessary equipment installed, such as 2000l watertank and 1800l fuel tank. No accessories. The trailer has a valid TÜV / MOT approval. Performance: 2 x HAMMELMANN HDP 170 units with 2 x pressure steps: 1- 2900bar 29l/min 2 - 3000bar 27l/min Diesel Engine = Caterpillar 3126B ATAAC The units has always been maintained as they should. The units are running and performing as they should. Sold without any warranty.
YOC: 2024 - bought in 2026 1234 y for new vehicles
A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.
Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.
This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels
Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 8000 l/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohn ...
The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology
Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet
The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)
2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise
Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main
Ref.nr 00925 A and Ref.Nr 00926 B Please note in the video: the gray left Esta filter system is Ref.nr. 00925 A (sold separately) Ref.nr. 00925 B Designation of the system Filter + Extraction System Manufacturer Esta Extraction Technology Model EU 562-2 Year of construction ? KW 15 kW Volt 400/690 A 28 Hz 50 IP 55 B3 2930min Housing position LG 0 Remark: Outside under power Ref.nr. 00925 A Name of the filter system For sale is an ESTA Dustex F84 filter system for the extraction of grinding, polishing and processing dust. The system is suitable for industrial workplaces and ensures a clean working environment. Manufacturer: Esta Model Dustex F 84 Year of construction ? Research found: The ESTA DUSTMAC F-84 (often referred to synonymously with the Dustex F series) is a high-performance, IFA-certified central extraction system. It is special ...
Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.
General Description TRUMPF laser cutting head assembly (Schneideinheit) for CO₂ laser cutting systems. The unit is designed as a replacement cutting head for TRUMPF TruMatic/TruLaser machines equipped with TruFlow laser resonators. The assembly includes the autofocus unit, height sensing system, gas connections and electrical interfaces. Technical Details Manufacturer: TRUMPF Component: Laser cutting head (Schneideinheit) Material No.: 2014986 Serial No.: Partially visible Compatible with TRUMPF CO₂ laser systems Integrated autofocus drive Height sensing unit Pneumatic and electrical connections Condition: Used Condition Complete assembly supplied in the original protective packaging. Connectors and housing appear intact with minimal cosmetic wear. Lens condition, focus cartridge, cooling circuit and operational status have not been tested. Delivery Available im ...
Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperatin ...
Compact shrink machine with angle welder Schlichter Profi Packer SCK 5844 A shrink wrapping machine. Compact, space-saving design: angle welding unit and shrink tunnel. Suitable for packaging food, technical items, gift items, printing and paper products, household and toy goods, textiles and much more. Create multipacks and bundles. Year of manufacture 2012, condition very good immediately ready for use VAT reclaimable, ex stock - Fixed sweatband, low-wear with long service life. - High-quality, high-performance shrink tunnel, - Bar chain transport in the shrink tunnel with 25 mm bar spacing. - Product table and film roll holder can be adjusted together. - Modern, very simple LCD control display. - Setting options: welding and heating temperature, cooling time, automatic cycle, modern microprocessor control. - Modular component design, easy to service - Robust steel fra ...
throat: - mm tool adaptor: siehe Fotos power requirement: 0 kW internal diameter: ca. 240 mm max. pitch circle: ca. 200 mm total power requirement: 0 kW Shipping weight: 230 kg Packing: ca. 800 x 500 x 400 mm Multi-spindle drill head Drilling bell incl. a total of 34 drilling plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
vacuum pump: Fezer RA 0100t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...
maximum number of results exceeded
please refine your search
500 € 
