temperature control unit used for sale

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

Shrink Tunnel Film Shrink Tunnel Manufacturer: Diez Type: HTC5030D Year of manufacture: 2018 No operating hours! Passage width: approx. 50 cm Passage height: approx. 30 cm Total length: approx. 220 cm

Dimensions (L/W/H): 0x0x0 mm Weight: 65 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 57 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 60 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Total power requirement: 0,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 61 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 set = 3 new centring units, zero point system, Micro grip 50, Parotec, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - Comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Hydraulic power unit REXROTH consisting of: Hydraulic tank 250 Ltr. Electric motor 15 kW REXROTH Internal Gear Pump HYDAC Accumulator SCHMÖLE Heat Exchangers Temperature monitoring Hydraulic filter Return filter

Drive motor: 400 V, 0.55 kW, 2,800 rpm. Thread diameter range: M 1 - M 6 Spindle stroke: max. 15 mm Output: max. 120 rpm

Complete set condensing Unit Rivacold with 1 compressor Copeland Scroll ZF24 for a freezing room with a capacity of 80 to 120 m3, Rivacold condensing unit -Compressor type: ZF24KVE-TWD -Cooling capacity: 15.7 kW at -5°C/40°C, 12.97 kW at -10°C/40°C, 7.03 kW at -25°C/40°C -Dimensions: 1750 x 1000 x 1500 mm -Number of fans: 2 x 500 mm Evaporator Rivacold -Type: RX50338 -Cooling capacity: 8 kW -Fin spacing: 8 mm -Electric defrost -Dimensions: 1750 x 570 x 460 -Number of fans: 3 x 350 mm We have 10 complete sets (condensing unit + evaporator) in very good condition/ready to work.

Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

The VISCOTHERM Hydraulic Power Unit B/C 11–22 Z/HP is a powerful, robust pump unit for the reliable supply of the ROTODIFF hydraulic motor in decanter centrifuges. With an 11 kW electric motor, a gear pump (22 l/min at 270 bar) and integrated proportional control, it enables infinitely variable adjustment of the screw speed during operation. The 85-litre tank, an efficient oil/water cooler and extensive monitoring and protection components ensure safe and long-lasting operation – even under demanding industrial conditions.

Inv. Num. : 8886 Type: RUR 2500 Producer: PIERCE Created: 2005 Parameters: Work table length: 6000 mm Work table width: 2000 mm Equipment: Source: Plasma and autogen

NUMBERING AND PERFORATING UNIT FOR SPEEDMASTER 52 -As new, used just few times -Shaft with 2 wheels -2 cams, one perforating arm -Available immediately in our warehouse

Demonstration machineTechnical data:Motor output power 3 hp at 100 % ED, voltage 400V, extraction capacity 3900 m³/h, extraction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kgPrices subject to change, errors, printing and typesetting errors excepted

Holzprofi Maker cyclone extractor with double chip filtering. The first dedusting is working via a cyclone, the second dedusting via a filter patrone. Including remote control. Technical data: Standard volume flow 1350 m³/h Filter surface 2,6 m² Vacuum V/min 2000 Pa Suction socket 150 mm Branch 150/100/100/100 Motor rated power 1,5 kW 400V Chip collection volume 160 Liter Weight 89 kg

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

Processing dust extraction substation COMPOSED OF: - Centrifugal dust extraction fan - N. 132 sleeves diam. 120 H 3000 mm. with baskets - Suction capacity 20,000 m3/h - Material discharge system with rotary valve - Bag cleaning system with blowers controlled by a cyclic economizer - Motor vibrator on discharge hopper - CAM Logic on the discharge hopper for clogging level signalling - Electrical control panel - Centrifugal fan mod. EUC 801 30 kW i14

Chamber filter press REWA 1000/55 Panel format 1000 x 1000 mm Number of filter plates 54 + deflection plate Filter area 85 m2 Press capacity approx. 1358 dm3 Panel package length approx. 3750 mm Filter pressure approx. 15 bar Dimensions L x W x H 6000 x 1600 x 1700 mm Weight approx. 8 t Refurbished delivered by REWA in 2019, only 3 years in operation for vegetable oil Optionally with Abel CM-G-C261-ED piston diaphragm pump, 5.5 kW

table width: 6000 mm table length: 2000 mm burner heads: 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Function: It serves as a housing and processing unit for the PacDrive controller cards (such as C400 or C600), which take over the logic and motion functions for up to 16 or more servo axes.

New Spindle Oil Cooler for Emco Lathes Year of manufacture: 2023

Deep Drilling Machine brand Buck Year of construction 2000

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

used hydraulic power unit with accumulator, for the operation of a screen changer �

Power supply model Trio PS/1AC/24DC/5, used but in very good condition.

Width 45 cm Year of manufacture 1997 flexible sword folding unit MS 45 Self-control Delivery date: immediately Price on request. Worldwide Delivery & Installation

Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Additional independent injection unit with its own supply and control system

Two built-in refrigeration units from the manufacturers Güntner and Riedel are available. Both units have been in storage for a long time and are uninspected. Documentation available. An on-site inspection is possible.

Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock

REF-2732-2733 BELCA SLEEVE WRAPPER WITH SHRINK TUNNEL Manufacturer: BELCA 1) Sleeve wrapper: • Model: BEP 60 REVISTAS • Serial no.: L-433-E • Year: 2012 • 1 kW/380 V • Sealing bar: 650 mm • Overall dimensions (mm): 1,400 x 1,250 x 2,000 (LxWxH) 2) Shrink tunnel: • Serial no.: L-288-V • Year: 2005 • 17.53 kW/380 V • Aperture: 670 x 380 mm (WxH)) • Tunnel length: 1,030 mm • Overall dimensions (mm): 2,200 x 1,250 x 1,750 (LxWxH) Both machines can be purchased together or separately.

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008

Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 36 edge banding machine -Motor: 0.18 kW -side: adjustable -Height: adjustable -Number: 2x aggregates available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price per piece -Dimensions: 260/370 / H510 mm / 260/370 / H480 mm -Weight: 22 kg / pc.

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Hemag, saw unit can be swiveled by 30 ° -Saw blade: max. Ø 350 x 30 mm -Motor: Perske type DKNS 120/2 3.0 kW / 2830 rpm -Protection class: IP 54 -Dimensions: 950/780 / H630 mm -Weight: 115 kg