temperature control unit used for sale

Manufacturer: IMA Radienschleifeinrichtung oben und unten, Spare part from machine: IMA, Profile sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 600, Max. roller diameter: 40, Slewable horizontally: yes, Sanding belt hight: 20, Slewable sanding head: yes, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,25, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: yes, Oscillation: no,

Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013

Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,

Manufacturer: Rippert, Type: Abdunstwand, Year: 1990, Control: hand, Filter surface in m³: ca.1800 X 2200 X 300, Exhaust air m³/h: 5000, Exhaust air m³/h: 5000, Year :1990

Manufacturer: Homag Eckenkopierschwabbeln, Type: FS 11/FS 10, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Eckenkopierenfunktion: yes, Motorenanzahl: 1, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Year :1996

Manufacturer: Homag, Type: Schwabbelaggregate, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Oszilierend : yes, Motorenanzahl: 2, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Year :1996

Manufacturer: IMA, Type: Schwabbeln, Ersatzteil aus Maschine: IMA Combima, Polieraggregat: yes, Oszilierend : yes, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Preis pro Stück Euro: 1.000, Gebraucht: yes, Preis pro Stück Euro: 1.000,

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg R410A refrigerant. 1000 g 5 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Hydraulic power unit with pressure accumulator

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: 60 l/mim engine output: 2 kW turning speeds: 2850 U/min feed pressure: 9 bar Dimensions (LxWxH): 2400x1060x560 mm Total Dimension: 2400x1250x1200 mm empty weight: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Composite system houses with 4 pcs compressor Bitzer screw Type: HSN 7471-75-40P Cooling capacity 1351KW at minus 41 °Celsius evaporation temperature. Including condenser, oil cooler, control box, etc. with Economiser. Refrigerant R404A, R507A, R449, etc. Can be used for blast freezers or freezers. Price on request 0043-6641838175 or infofrigocom.at

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

Horizontal Plate Freezer Self contained with built in Gram Compressor Pack 6 station In cabinet Needs service/overhaul "AS IS"

table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 1000 kg : 190 mm connected load frequency: 380 V total power requirement: 0,75 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 500-10,000g | filling hopper capacity: 100 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.75kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 10-5000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.25kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-1000g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 1-200g | filling hopper capacity: 15 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...

NC Branch Hofmann RWNC 160 Tip height: 160 mm With tailstock

Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.

Gestra Condensate Compensator 50 l, 8 bar stainless steel with connection flanges DN 50, DN 80, DN 20, with stainless steel shut-off valve DN 20, emptying oval flange and 3 foot spindles + Check valve DN 80 Cylinder 240 Klepper floors each 100 long

Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.

Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.

2.090 litre, Stock number: T3638, Litre: 2.090, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 5 pcs., Item: Filter tank, Standing: Hanging in legconsol, Top: Dished, Bottom: Dished, Filter: In the top and bottom, Inner diameter: Ø 800 mm, Total height: H 4240 mm, Manufacturer: Shanghai Chengdong Technology CO., LTD, Model/type: SX-800, Year: 2017

Nummerierwerke Buchdruck / Numbering Units Letter Press Leibinger NW

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

Hydraulic power unit with hydraulic pump BOSCH REXROTHHydraulic power unit Year of construction approx. 2000Operating pressure pump1: 10 barVolume flow pump1: 24 litres/min. Engine power pump1: 1.5 kWoperating pressure pump2: 120 bar (max.140 bar)Volume flow pump2: 44 litres/min. Engine power pump2: 11 kWTankle capacity: 200 litresMains connection: 400 volts, 50 Hz- 2 independent hydraulic pumps, each with its own drive motor- 6 hydraulic valves built- Cleaning cover in the oil tankSpace requirement L x W x H 1000 x 700 x 1200Weight:

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMAHydraulic power unit Year of construction approx. 1985Operating pressure: max. 65 barVolume flow: 20 litres/min. Fuel tank capacity: 110 litersEngine power: 3 kWMortor speed: 1440 rpm. Mains connection: 400 volts, 50 Hz- 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1- 1 piece drive motor KATT, type FFN 100L- 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM- 1 piece return filter- 1 piece 4/2-way hand valve (e.g. for retracting and extending a double

Hydraulic power unit with hydraulic pump RACINE / VICKERSHydraulik gensetOperating pressure: max. 44 barVolume flow: 13 litres/min. Tank capacity: 40 litersEngine speed: 950 rpm. Engine power: 0.75 kWNetz connection: 380 Volt, 50 Hz- 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11- Hydraulic tank with maintenance cover and oil level sight glass- 2 pieces hydraulic hoses with 12L connections, length = 950 mmSpace requirement L x W x H:: 700 x 400 x 750 mmWeight: 97 kg (without oil content); used

Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used