134,941 used machines on RESALE, but how to find them? Machine Search
Automated assembly and processing unit from the manufacturer Böllhoff Automation GmbH, designed as a complete, ready-to-use special system. The unit is designed for industrial joining and setting processes (including Rivset® technology) and consists of a stable mechanical mount, integrated drive technology and complete electrical control. The system comes from an industrial series application, is visually in good condition and has been professionally dismantled. All essential assemblies such as control cabinet, operating unit (HMI), drive and process module are available. Due to the special design, the system is particularly suitable for users with appropriate process know-how or for integration into existing automation solutions. Technical data: Technical data Manufacturer: Böllhoff Automation GmbH Designation: Automated assembly/setting unit (special system) Product no.: 9524-71 ...
On-board documents: ok, MTM 19000kg, TTM 20500kg, MTM TOW 44000kg, 315Kw Auction-ID: A1-49292-3
New and unused modular high-end living unit from the AB-Cabins brand Dimensions approx. 11,400 x 3,400 mm Modern architectural design with rounded corners and panoramic glass façade Earthquake-resistant steel frame construction Insulated with 50mm high density polyurethane panels Additional polyurethane foam insulation Façade finish in coated aluminium panels Panoramic curtain wall with double-tempered insulating glass (LOW-E 6 + 12A + 6) Thermally broken aluminum window and door system IP-integrated smart home system with voice control (Siri compatible) Gree central inverter air conditioning (2 units of 1.5 HP, heating and cooling) Haier Electric Storage Water Heater for Hot Water Supply Integrated smoke detector with smoke concentration monitoring Cement Fiber Floor Base with Waterproof Composite Wood Finish Bamboo Charcoal Fiber Interior Wall Finish Fiberboard or alumi ...
50x50 cm PANELS, used. Total sqm. 13,5 Auction-ID: A1-49187-84
On-board documents: ok, MTM 19000kg, TTM 20500kg, MTM TOW 44000kg, 315Kw Auction-ID: A1-49292-12
Automated assembly and processing unit from the manufacturer Böllhoff Automation GmbH, designed as a complete, ready-to-use special system. The unit is designed for industrial joining and setting processes (including Rivset® technology) and consists of a stable mechanical mount, integrated drive technology and complete electrical control. The system comes from an industrial series application, is visually in good condition and has been professionally dismantled. All essential assemblies such as control cabinet, operating unit (HMI), drive and process module are available. Due to the special design, the system is particularly suitable for users with appropriate process know-how or for integration into existing automation solutions. Technical data: Technical data Manufacturer: Böllhoff Automation GmbH Designation: Automated assembly/setting unit (special system) Product no.: 9524-71 ...
On-board documents: ok, MTM 19000kg, TTM 20500kg, MTM TOW 44000kg, 315Kw Auction-ID: A1-49292-4
On-board documents: ok, MTM 19000kg, TTM 20500kg, MTM TOW 44000kg, 315Kw Auction-ID: A1-49292-14
Galli TCE3000/2T leather die-cutting/punching machine with marking unit – 3,000 kg – incl. punching Specifications: Brand: Galli Type: TCE3000/2T Serial number: 20797/B86 Application: Professional Leather Industry Suitable for: leather belts, belts and leather strips Version: double-head punching/punching machine with central marking/stamping unit Drive punching units: hydraulic Maximum hydraulic pressing force: approx. 3,000 kg Drive marking/stamping unit: pneumatic Maximum pneumatic pressing force: approx. 900 kg Maximum cutting length: approx. 1,500 mm Adjustable material/conductor width: approx. 5–125 mm Tool length: approx. 280 mm Maximum marking/embossing area: approx. 280 x 80 mm Installed power: approx. 2.7 kW Electrical connection according to factory data: 400 V / 50 Hz / 3-phase Dimensions according to manufacturer's specifications: approx. 160 x 75 ...
Evaluation Unit PERPERL+FUCHS DENT-M MVI-D2-2HRX Part No. 33770 24 V DC see also EL2739 ! used, tested !' Dimensions: 140 x 100 x 80 mm
Evaluation unit BALLUFF BIS S-6022-019-050-03-ST10 ( BISS-6022-019-050-03-ST10 ) series BIS S used ! Dimensions: 190 x 120 x 60 mm
Electronic Module, Interface Unit GE FANUC FIELD CONTROL GENIUS BUS INTERFACE UNIT IC670GBI002G 09847 New ! Dimensions: 130 x 115 x 105 mm
length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm
weight:400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine
material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m
Solar Measurement Unit, Solar Measurement Unit SCHULZ SYSTEMTECHNIK SMU200//2 220 to 240 V suitable components: EL407, S482, EL872, EL874, EL875, EL876, EL877 used ! Dimensions: 480 x 560 x 260 mm
Drive unit, three-phase electric motor VEM, ELMO motor: Type 1255.3/3 0.04 kW 2800 rpm 220 / 380 V 50 / 60 Hz IP 44 The drive unit is designed to operate on 220 V single-phase AC !' shaft diameter: Ø 7 mm approx. 1.0 m Connection cable New, Aluminum housing ! Dimensions: 250 x 140 x 175 mm
Return filter unit, surface-mounted return filter HYDAC RFDBN/HC161G10D1.1 VR2 - D.0L24 25 bar switchable, with 2 pressure switches ! Dimensions: 335 x 320 x 220 mm
Valve Daisy Chain Unit ORSTA EV 10 - 08 / 1 TGL 26263 / 20 Pressure Rating: 32 MPa Current Limiting Valve SB 10 - 21. 01 / 0 TGL 26245 / 20 Dimensions: 160 x 90 x 65 mm
Valve Daisy Chain Unit ORSTA 10 - 02.01 TGL 26244 / 20 Current Limiting Valve Dimensions: 170 x 110 x 55 mm
Valve Unit, Directional Control Valve ORSTA 06-088.11-0 TGL 26223/60 Valve Chaining System TGL 26215/30 Pressure Switch D5 CO 2 TGL 10952 pressure inder valve 06-20.06-20 02 TGL 26234 control magnet G45 H TGL 32094 Dimensions: 340 x 210 x 60 mm
Hydraulic power unit with tank LINCON KV 18-102-141/0.12 ( KV18-102-141/0.12 ) 8 bar 1 l/min motor: 0.12 kW 220 / 380 V used, tested ! Dimensions: 380 x 300 x 400 mm
Valve interlinking unit with key ORSTA 10 - 05 TGL 26265 / 20 Nominal pressure: 32 MPa current limiting valve 10 - 02.11 TGL 26244 / 20 New !' Dimensions: 170 x 110 x 55 mm
Maintenance unit, three-piece PPT PNEUMATICS, PRVA PETOLETKA WA1-101 M NW 10 229-28200 0 - 10 bar New ! Dimensions: 270 x 220 x 155 mm
Maintenance unit, three-part PPT PNEUMATICS, PRVA PETOLETKA WA1.101.Z 229-28200 0 - 10 bar New ! Dimensions: 270 x 220 x 125 mm
Pneumatic unit FESTO PEV-1/4-B-0D 175250 HEL-D-MIDI 165080 FRM-H-D-MIDI 170688 Dimensions: 180 x 140 x 55 mm
Maintenance unit, three-piece PPT PNEUMATICS, PRVA PETOLETKA WA1 061 M NW 6 229-28100 0 - 10 bar New ! Dimensions: 270 x 220 x 155 mm
Maintenance Unit, Pressure Regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar Explosion-proof ! Dimensions: 300 x 250 x 120 mm
Maintenance unit, three-piece LANDEFELD 1/2 Block CL 123 7107289 0.5 - 10 bar New ! Dimensions: 265 x 210 x 80 mm
Maintenance unit LANDEFELD COMPRESSED AIR CL 14-6 MULTIFIX 0.2 - 6 bar G 1/4 New ! Dimensions: 275 x 100 x 60 mm
Maintenance unit with pneumatic switch WMW, EAW Type: 3 1026/19 switch st H2 NW 6 0 - 1 MPa New ! Dimensions: 380 x 240 x 150 mm
Maintenance unit, three-piece MARTONAIR, NORGREN M8B-A68-B39D R15-000-RNL0 F15-000-M3H0 L15-000-0P90 G 1 1/4 0.4 - 8 bar New !' Dimensions: 450 x 280 x 145 mm
Maintenance unit, maintenance device combination FESTO LFR-D-DI-MAXI LFR-1/2-D-DI-MAXI-KF 192445 G 1/2 12 bar used, tested ! Dimensions: 360 x 290 x 125 mm
Maintenance unit with soft start valve SMC EAW300-F02 EAV300-F03-5Y0 EAL300-F02 0.5 - 8.5 bar 24 V DC used ! Dimensions: 420 x 210 x 105 mm
Maintenance unit with pressure switch REXROTH 3 x 0 821 100 023 2 x 0 821 300 306 1 x 0 821 302 515 4 x 0 821 300 920 1 x 0 821 300 264 0,0,0 5 - 16 bar used, Accessories for AGIE CUT 300 ! Dimensions: 340 x 250 x 100 mm
Evaluation unit PEPPERL+FUCHS Ident - M MVI-F57-2HB12 108068 Dimensions: 340 x 260 x 190 mm
maximum number of results exceeded
please refine your search
750 € 
