134,938 used machines on RESALE, but how to find them? Machine Search
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.
Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.
Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...
feed pressure: 60 bar liter capacity: 40 l power capacity: 5,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,2 x 0,8 x 1,55 m No. 4972 Hydraulic Aggeregat 250 l / 60 bar / 40 l/min formerly HEYLIGENSTAEDT Heynumat 10 Drive: 5,5 approx. 300kg ( estimated ) Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet ) Dimension: 1200 x 750 x 1550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Refrigeration unit FRASCOL LB2-Q736-0Y-2T with condenser USAC16E and compressor Q7-36.1Y1000. FRASCOL Q7-36.1Y1000 Compressor Power: 7 hp Flow rate: 35.86 m³/h with 2 pcs fan HIDRIA R11R-4525A-4T-5747 Power: 315W and 1420 rpm Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
throat: - mm tool adaptor: MK power requirement: 0 kW max. pitch circle: ca. 250 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: Ø 500 x 500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Make: BITZER Compressor BITZER 4J-13.2Y Power: 13 hp Flow rate: 63.5 m³/h Condenser EKO with 4 pcs fan for positive and negative cooling Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Hot melt machine 3~, 3LNPE, 20A, 5.8 kW, 400V, 50/60Hz very little used / replacement device Complete with: 2 application heads 2 heating hoses length: 120 cm W08T200 Encoder Balluff BDG 6110-2-10-30-Z061-1200-65 Product Recognition Photocell Manual approx. 15 kg hot glue
Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.
Falzniederdruckpresse / Joint Nipping Press Gantenbein ROLONG RE SN. 1060 Serial-No. 1060 hydraulische Press / hydraulic press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometer Auf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4 Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52 Year 1997 - SN. 790490 Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
3. Falzstation - Eigensteuerung - 3. Folding unit - SelfControl MBO T92/444 - 56/4 Year 1986 - Serial-No. 20860601 Infeed width max. 560mm 4 buckles SELFControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
maximum number of results exceeded
please refine your search
200 € 
