temperature control unit used for sale

Power: 6KW , Ratio: 320:1 , Speed in/out: 1.450 / 4,53 , Shaft ø in: 70mm. , Shaft ø out: 125mm. (hollow)

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Evaporator for freezer, shock freezer, evaporator, make: Güntner with two pieces fan (650mm diameter), quick fan, blowing, Lamb spacing is 12 mm 55 litres capacity

Programming Trolley KP-Qume QVT52 III composed of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35.5 cm) Picture tube flat, white phosphorus Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character representation - 80 characters: 14 x 15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x 15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Refresh rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM Codepage 437/850 Screensaver yes, adjustable times Memory 4 or 7 screen pages depending on emulation Keyboard New ASCII (N.A.), various languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38.4kB / ...

Dampening engine for SHIVA 572

Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The  ...

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Storage number: 3572 Various Manufacturer: GRUNDFOS PUMP , Type: CRK 4-100/10 A-W-A-AUUV Specifications: Rated Flow 66.7 l/min Stages impellers 12 pc Volt 380 v Depth of the pump 385 mm Engine Power 2.2 Max Print 8 Bar Weight: 29.6 kg

Stretch wrapping machine IMA model: MS300AM

Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg

Pester Pewo pack 450 compact

Fabr. Walter Tip height: 105 mm

Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

Angular milling unit suitable for IMA - incompatible with a Weeke plug

Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

ID-Nr. 1-056-11-0400

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

?dapter unit flat scraper

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Central unit, control system, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Overall dimensions: 255/130/H220 mm -Weight: 2.3 kg

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PROFROID QC MT 100 PK Brand:PROFROID Type:QC MT 100 PK Stock number:M21-1293 Cooling capacity:6.82 kW Application:Cooling Number of fans:2 Refrigerant:R744 (CO2) Voltage:400 Volts Motor power:2x 0,25 kW Dimensions:1200 x 390 x 1430 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please visit also our website: used-refrigeration

PROFROID QC MT 30 PK Brand:PROFROID Type:QC MT 30 PK Stock number:M21-1292 Cooling capacity:2.25 kW Application:Cooling Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 360 x 1028 mm Weight:125 kg Year:2019 New/unused Number in stock:1 piece(s) Price:Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please also visit our website: used-refrigeration

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg

PROFROID QC LT 75 PK Brand:PROFROID Type:QC LT 75 PK Stock number:M21-1291 Cooling capacity:2.04 kW Application:Freezing Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 690 x 1028 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 2 scroll compressors. Mentioned capacity at an evaporating temperature of -32°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Lateral Perforating Unit GTO 46 (EXTRA TOOLS) • incl. numbering shaft • 2 extra perforating knives (unused)

Pneumatic cylinder, air cylinder, standard cylinder, guide unit -Manufacturer: Festo, guide unit -Type: FEN-50-0250-KF -Stroke: 250 mm -Bore: for piston Ø 40 mm -Price: per piece -Number: 1 piece -Dimensions: 437/135/H70 mm -Weight: 4.7 kg/piece

INTENSIVE Nozzle Filter JC 20/1-2 BS 22.6 Filter Area Attachment filter without funnel 20 baskets ø 160 x 2250, control unit S 6022-220 V Diaphragm and solenoid valves new, filter bags new Housing approx. 1.35 m x 1.35 m x 3 m Space requirement horizontally to change hose approx. 1.8 m

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

Guide unit for pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Festo, FEN control unit... -Type: FEN -X-S1-SA see image of type plate -Stroke: approx. 200 mm -Bore: for piston Ø 48 mm -Dimensions: 465/190/H105 mm -Weight: 14.2 kg

Central processor unit CPU, also with model number: 170174 recognizable, price ex stock