temperature control unit used for sale

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Blocking unit Built in 1999; working condition

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

Upright stack delivery with pressing unit; working condition

Swivel unit, OSE-A45-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Used respirator AVT, type: PSH 3/3 - rust and aircraft stainless steel (1.4404) - ventilation unit with sight glass - seals with clamps - filter candles 3 x 30 ' maximum height 750 mm - operating pressure 0-10 bar - operating temperature 0-150 ° C - connections NW 4 0 - feet height adjustable - height instrument gauge 1,325 mm -Operating pressure 0-10 bar Inspection and test run are possible by arrangement like.

1 unit 2 buckles + 1 unit 2 buckles

Cross slide unit with 2 spindles, for conversions or adaptations

Spindle unit, for conversions etc - see picture

Feed-slide unit with multi-spindle boring head and turning unit, for conversions and adaptations

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Linear unit, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex KTR claw coupling GS24 ...

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

For DMG HSC 75

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

For sale: USED Diane XT HMI Control Panels , 1 x PP250 & 1x PP450, USED and in good working condition email for photos and price Ex-Stock UK

Good working conditions

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Good working conditions

Good working conditions

7.5 KW

Machine Type: Water Circulation Cooling Unit Make Jäckle Type FKG 3 Connection for the welding machine 230 V Schuko coupling Connection voltage 1 x 230 Volt Power connection 230 V Schuko plug Water pressure 3 bar at 2.3 ltr./min. Cooling capacity 1,000 W Burner connection 2 quick-release couplings Water tank 5.4 ltr. Content Dimensions L x W x H 1,080 x 520 x 830 mm Weight 44 kg Age approx. 10 years Condition workshop tested incl. UVV protocol Warranty: 6 months from the date of delivery Original price €1,350.00 + VAT Your price €590.00 + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Straße 31 81249 Munich The contact person is Mr. Manuel Maier. Of course, we will ship the machine to you for 60,- € by freight forwarder thro ...

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, the ...

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Qty. 1 Second-hand shot blasting chamber unit Mfc.: Getrasur Blasteco Type: BLASTECO PC-BE 2466 Built: 2007 Stopped: 2022 with complete handling equipment Dimensions: 24.0 x 5.85 x 5.95 m – L x W x H Construction: Modular bolted – steel sheet elements. The frame structure consists of 7 internal frames and 2 edge frames. The edge frames form the gate porticos. Access: Main roller shutter gate (2 pcs.), motorized - electrically driven Gate clearance: 5.0 m x 5.01 m (width x height) Consist of: Control cabinet GETRAFLEX abrasive recovery floor Recirculation machinery Recovery and separation system Lighting (top, side) Automatic gate (x2) Service doors (x2) Cleaner (x2) Dust extraction ventilation

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

Refrigeration unit Bitzer LH104 2CC-4.2Y-40S

Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee

2 pieces available For more information, please refer to the enclosed photos.

Manufacturer: Comatic, Bauyeshr : ca.1995, Feeding by belt: yes, Main engine kW: 1,5, Speeds: 4-8-12-24, Stand: yes, Year :ca.1995

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

MAKA

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

The DMG 3Decure post-exposure unit is used for the professional curing of 3D-printed components and ensures improved material properties through optimized UV aftertreatment. Thanks to its precise control, it enables uniform curing and thus ensures higher mechanical stability and surface quality of the manufactured parts. Particularly suitable for industrial applications in additive manufacturing. Properties: - Fully automatic material curing programs - Integrated 6-inch touchscreen - Network connectivity - Easy calibration with ACCS sensor to ensure instrument function - 360° UV illumination for even curing Specifications: - Power: 160 W - Voltage: 24V - Interfaces: LAN, USB, On/Off - Dimensions: 23 x 38 x 27 cm - Weight: 12 kg Condition: very good condition Manufacturer: DMG Dental Material Gesellschaft mbH Elbgaustraße 248 22547 Hamburg Germany Phon ...

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Moog Servo Valve Unit D665-5703 & D661-5623C High Performance Valve Module For sale is a fully functional, industrially used high-performance servo valve unit from MOOG, consisting of two perfectly matched valves Also available as a single component ! Moog D661-5623C – High-Response Valve Technical Property Value Model name: D661-5623C Type code G18H0A0NSA0HP Valve type 4-way, 2-stage with bushing slider Nominal volume flow 120–200 l/min (depending on version) Operating pressure P, A, B max. 350 bar Return pressure T (internal) 210 bar Return pressure T (external) 280 bar Control pressure 25–350 bar Coil stroke ±0.13 mm Control surface (AK) 1.35 cm² Actuation time (0–100 %) approx. 14 ms Hysteresis < 0.6% Zero displacement < 1% Supply voltage ±15 V DC Input signal ±10 V IP65 protection Mass approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94  ...

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Displacement unit

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...