temperature control unit used for sale

CNC control, power supply, switching power supply, controller, control unit, Promodul -Manufacturer: AEG, control unit -Type: LOGISTAT CP 80-A04.1 -Dimensions: 485/130/H170 mm -Weight: 5.3 kg

Unused, condition unchecked Auction-ID: A7-47109-108

Two Dong Do industrial control/display units with keypad, PROFIBUS and RS232C interfaces, AC100–240V, 30W max, tested powered on

Lot of 2 Lenze 8100 industrial frequency inverter / motor drive controller units.

Frequency Control Device, Synchronous Relay, Frequency Controller MSR ELEKTRONIK SYNF-2 230 / 400 V 3 VA 50 Hz Relay Output(AC): 250 V 250 W Relay Output(DC): 30 V 30 W used !10 V Dimensions: 100 x 75 x 110 mm

Control Unit, Control Electronics, Numerical Control WMW, NILES TDR 700-112 ( TDR700-112 ) Input: 260 V 3AC 41 A 49 - 62 Hz Output: 275 V DC 50 A used, tested ! Dimensions: 280 x 250 x 160 mm

Control Unit, Control Electronics OFD Feinmess Dresden MS1 - Control Unit ( MS1 Control Unit ) SG 101 V17 ( SG101V17 ) 110 - 240 V 50 - 60 Hz 50 VA New !' Dimensions: 430 x 280 x 140 mm

Control Unit, Control Electronics, Numerical Control WMW, VEM VEB NUMERIK CNC - H 645 ( CNC-H645 ) 19623212 4518784 220 V 48 - 62 Hz used ! Dimensions: 550 x 320 x 630 mm

Directional Control Valve Unit, Directional Control Valve Assembly HAWE BWN1A-5-Z3/50 2105 New ! Dimensions: 200 x 150 x 110 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

Control cabinet cooling unit, control cabinet cooling unit TRAUB 380 V 3 AC spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 490 x 320 x 1320 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

Circulation pump, centrifugal pump, water pump, chemical pump KSB ETALINE GN40-160/902 Ausf. GN6, CD4090 with control unit VarioDrive Type:30FV1 DN60 380 V very good condition Dimensions: 680 x 310 x 470 mm

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!

3 pcs proportional valves + control unit, R900948284 + VT-HNC100-2…, Rexroth, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die-casting machines. The scope of delivery consists of: 3 used Rexroth proportional valves. It is possible that the valves function without any problems or that some may require refurbishment. The current market price of the new valve is approximately € 20,000. Our selling price is € 490 per unit. 1 used Rexroth control unit VT-HNC100-2-30/P-I-00/000. These control units are no longer available on the market, but are necessary for these valves. Our selling price is € 990. Applies to both items. Sale ...

6SL3040-1MA00-0AA0 SINAMICS S120 CONTROL UNIT CU320-2 DP SINAMICS Control Unit CU320-2 DP with PROFIBUS interface without CompactFlash Card As good as new. The device was only installed once briefly for testing. Was then replaced by another model. Comes in the box according to the picture, which is not the original box: Sale without warranty. VAT. The price is Euro 250,- + VAT. Pick-up in Bielefeld Jöllenbeck, or free shipping. You will receive replies to messages within our business hours. Mon - Thu 8:00 am - 3:30 pm / Fri 8:00 am - 1:00 pm

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Cyclus Battenfeld, operating unit from injection molding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 -Type: MDE-BDE -Number: 3x control unit available -Price: per piece -Dimensions: 290/50/190 mm -Weight: 0.8 kg/pc.

PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Linde, forklift control with voltage converter from forklift Linde R14 -Type: LDC-32/10-HE01 390 360 53 68 Inverter 79 174 01 236 -Dimensions: 265/170 / H55 mm -Weight: 1.5 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Manufacturer: Festo, maintenance unit with filter and control valve orig -Type: LFR-1/8-D-MINI -Pressure: max. 16/12 bar -Number: 1x filter control valve available -Price per piece -Weight: 0,5 kg/pc.

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: KUKA, control panel control panel -Type: VKCP2-SP -AN: 00-136-938 -SN: 0000036 24V/0.5A/DC -Quantity: 1x panel available -Dimension: 330/320/H120 mm -Weight: 3.2kg

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Handover: in the current condition as seen -Maintenance unit: incomplete, see photos -Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2 -Type: D-MIDI BD43 BO43 Individual components see photos -Pressure: max. 16/12 bar -Dimension: 530/105/H270 mm -Weight: 4.9 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Maintenance unit: with stable bracket -Outputs: 2x individually lockable -Pressure: Max. 10 bar / 150 PSI -Dimension: 390/325/H520 mm -Weight: 16 kg

Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 4 BIOS : P0097-01 -Number: 9x control unit available -Price per piece -Dimension: 150/135/H50 mm -Weight: 0.7 kg/pc.

Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 8 BIOS : P0159-01 -Number: 5x control unit available -Price per piece -Dimension: 150/135/H50 mm -Weight: 0.5 kg/pc.

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: bader, control cabinet - cooling unit -Type: W 25/8 A -Voltage: 230V -Power consumption: 0.120 kW -Number: 1x cooling device available -Price: per piece -Dimensions: 300/80/H750 mm -Weight: 11.0 kg/piece

Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm -Weight: 2.5 kg.

Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm -Weight: 48 kg

Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Sim, heat exchanger control cabinet cooling unit -Type: 4299 -Voltage: 230V -Cooling capacity: 1,350 W -Dimensions: 400/245/H1000 mm -Weight: 54 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance device combination, filter control valve -Manufacturer: Festo, maintenance unit D-MIDI -On valve: HE-D-MIDI / HEE-D-MIDI-24 -Branch module: FRM-D-MIDI -Control valve: LFR-D-MIDI -Pressure: max. 16 bar -Individual components: see photos -Dimensions: 340/100/H270 mm -Weight: 3.1 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS9-EE-G-V24-S-VS -Branch modules: MS9-FRM-G-VS -Individual components: see photos -Price/Fee: complete -Overall dimensions: 880/500/H210 mm -Weight: 17.7 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D7-CRV-AS -Branch modules: M56-FRM-1/2-AD7 -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 470/300/H110 mm -Weight: 4.5 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D6-CRV-AS -Branch modules: M56-FRM-1/2-Y -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 440/340/H110 mm -Weight: 5.3 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, filter regulator with pressure gauge -Type:LFR-1/4-D-MINI 159631 -Pressure: max. 16 bar -Quantity: 1x filter control valve available -Dimensions: 210/120/75 mm -Weight: 0.6 kg

CNC control unit, power supply, switching power supply, servo module, control unit, Pro module, controller, compact control -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-DX1 / LE4-116-XD1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

CNC controller, power supply, switching power supply, servo module, control unit, Pro module, controller, compact controller, PLC controller -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-XD1 / LE4-116-DX1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc.

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.