temper used for sale

Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

Kreuter Chocolate temperer Model: TMK100 Serial: 7906/91 Refurbished by Wolf in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

SKU: 90410-0051 Temperature controller KS 40 for e.g. TBA 8 Tetra Pak aseptic filling machine

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Sollich Type: MSV 750 A2 available: 2 machines YOM: 1995 output: from 350 to 850 kg/hour. different: good condition electrical: 330/400 VAC, kW different: 2 identical machines with water chiller We offer this machine in 'as is' condition, without warranty

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Temperature control device for couverture Model: Thermo-Quick Uno with 1 removable bowl double-walled version with thermal-oil filling for 6 kg each filling quantity Control by thermostat (70°C) 230 V, 350 watts Dimensions: 410 x 410 x 240 mm WxDxH Used equipment cleaned and tested

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48700 watts very good condition with operating instructions LWH: 1600 x 600 x 1400 mm

Tempering unit #5270 Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Refrigerant type: R134.6

The RE100 tempering oven is a product manufactured in the former GDR and dates back to 1982. It has a rated output of 18 kW and can reach a maximum temperature of 300 degrees Celsius. The furnace type RE100 is particularly robust and suitable for various industrial applications where high temperatures are required. With dimensions of 1.8 meters in length, 1.3 meters in width and a height of 2.05 meters, the tempering furnace offers enough space for larger batches of material. Although the product has been around for several years, it is in good condition and functional. ---------------------------------------------------------------------- -------------------------------- The tempering furnace RE100 was manufactured in the former GDR in 1982. This furnace type has a rated power of 18 kW and a maximum operating temperature of 300 degrees Celsius. With exterior dimensions of 1.8 mete ...

Temperature control unit table unit Model: TG 05-1 T Container approx. 9.5 litres Stainless steel Dry heating electronic temperature control Connection 230V, 400 watts Dimensions: 330 x 420 x 220 mm, WxDxH Used equipment cleaned Come to our big sales shop!

The RE100 tempering oven is a product manufactured in the former GDR and dates back to 1982. It has a rated output of 18 kW and can reach a maximum temperature of 300 degrees Celsius. The furnace type RE100 is particularly robust and suitable for various industrial applications where high temperatures are required. With external dimensions of 1.8 meters in length, 1.3 meters in width and a height of 2.05 meters (internal dimensions 1x1x1.3m), the tempering furnace offers enough space for larger material batches. Although the product has been around for several years, it is in good condition and functional. ---------------------------------------------------------------------- -------------------------------- The tempering furnace RE100 was manufactured in the former GDR in 1982. This furnace type has a rated power of 18 kW and a maximum operating temperature of 300 degrees Celsius. ...

Used HB-Therm tool temperatureizers, W-90, AW-90, CW-90, SW-90, SW-140 for sale. They have an output of 6-15 kW, for 90-140C of water.

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Capacity up to 250 kg/h Melting container capacity 35 kg stainless steel with casting device with vibration table Connection 8.2 kVA Electrical heating resistance 4.5 kW with cooling compressor, coolant R134a Cooling capacity 7.5 kW with touchscreen operation with 1 year warranty, operating errors excluded

WATER TEMPERATURE CONTROLLER TOOL-TEMP TT-133 MP-345 (a little leaky) M. No.: 21-06498-3 // Pressurized water device up to 140 ° C mould weight up to 1'000 kg Equipment / Additional information: Temperature control: self-optimizing microprocessor controller With digital display of the setpoint and actual value. Cooling capacity: 47000kcal / h at 120 ° C Cooling system: indirect Pump output: pressure operation max. 4.5 bar / max. 100L / min. Suction operation vacuum max. 8mWS Refilling: automatic with water filter Volt: 3x380-400 Watt: 14100 Hz50

Pressure flange for STARTER MAN 40/54 recon MAN part number: 161.01.011

RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

RS Simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test room dimensions: 530 mm x 630 mm x 530 mm (WxHxD) External dimensions: 820 mm x 1750 mm x 1300 mm (WxHxD) Current consumption: 13.5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments:   1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC                                   Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner ⌀ at exit: 508 Capacity: 300.000 MT per year Crew: 3 Operators                                                                                                                                                    

Temperature control unit of the tools - HB-THERM HB-100 U1 Year of construction: 2007 Description: heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, without operation Price: On request

Temperature control unit of the tools - TOOL TEMP TT-188 (20 pcs.) Year of construction: Description: heating capacity - 90°C Heat transfer medium – water Power: 9850 Watt Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, without operation Price: On request

Temperature control unit of the tools - BOE-THERM BT-095-09-D2-M5-V5-EG (2 pcs.) Year of construction: 2012,2014 Description: heating capacity - 95°C Heat transfer medium – water Power: 10.5 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, without operation Price: On request

Temperature control unit of the tools - HB-THERM HB-140 U1 Year of construction: 2002 Description: heating capacity - 140°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, without operation Price: On request

Temperature control unit of the tools - Wittmann Tempro plus D (10 pcs.) Year of construction: 2014 Description: The device in perfect technical condition The two-piece temperature control unit. This has 2 independent circuits and 2 controls. Each circuit can work independently with different tools and temperatures Power: 20 kW heating capacity - 90ºC Heat transfer medium – water Device has: - a vacuum chamber - a vacuum pump with a suction function of the medium from the tool - the device can be integrated with the machine, without operation Price: On request

Temperature control unit of the tools - REGLOPLAS P140/9/SG51.1/1K/RT45 (4 pcs.) Year of construction: Description: heating capacity - 140°C Heat transfer medium – water/oil Power: 9.9 kW Control: RT45 Price: On request

Temperature control unit of the tools - Regloplas 300S/6/FM25/1K/RT50 (2 pcs.) Year of construction: 2010 heating capacity - 300°C Heat transfer medium – oil Power: 7 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unoperated Price: On request

Temperature control unit of the tools - Tool-Temp TT-142N Year of construction: 2015 heating capacity - 160°C Heat transfer medium – water Power: 13.9 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unoperated Price: On request

Temperature control unit of the tools - Tool-Temp TT-133 Year of construction: heating capacity - 140°C Heat transfer medium – water Power: 13.9 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unoperated Price: On request

Temperature control unit of the tools - Tool-Temp TT-160E Year of construction: heating capacity - 140°C Heat transfer medium – water Power: 6.8 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unoperated Price: On request

HEF Durferrit Line - carburizing, quenching and tempering Nitrocarburizing in a salt bath and hardening of steel parts. Technology for saturation in a liquid medium of cyanide salts, consisting of: -SWQ 60/80/90 and - Salt bath for quenching and tempering -STC 35/80- Electrode furnace for carburizing, hardening and annealing -LSU 60/70- Salt bath for carburizing, hardening and annealing In this technology, the surface layer of the materials is saturated with small amounts of nitrogen and carbon in a temperature range from 480 ° C to 630 ° C. Bath size - 350 x 800 mm Basket size – Ø 300 mm x H 300 mm Saturation of the surface layer with carbon and nitrogen at a depth of 0.4 ÷ 0.6 mm Hardness HRC 64 ÷ 66 Maximum dimensions of details for cementation: Lmax = 550 mm, Ø 300 mm

Universal temperature control unit WEINREICH Type WTD 4 Fabr. No.: 11932217 Year of construction 1993 Temperature max. 140C Operating overpressure max. 6 bar Pump capacity 30 l/min. Tank volume 4 litres Heating capacity 4 kW cooling capacity Heat exchanger 15 kW Engine power of the pump 0.37 kW Circulation water Flow + return G 3/8 Cooling water flow + return G 3/8 Total power 4.4 kW Mains connection 380 Volt, 50 Hz, CEE plug - Temperature control medium Water temperature control with actual and setpoint values STÖRK-TRONIC Type ST 96-35.02K- Water circulation pump SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - mobile on 4 wheels Dimensions L x W x H 620 x 260 x 670 mm Weight 55 kg good condition; used

Stainless steel mixing tank with liftable, heated lid. Manufacturer: Essiccatore Granplast Type: AS2 Dimensions: 800 x 950 x 1900 mm Tank size: diameter 800 x 200 mm

Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

Size approx. 23x64xH62cm

Usable space: 7.7m³, max. temperature: 250°C, heating output: 54kW, volume flow: 15m³/min.

Max. operating temperature: 950°C, connected load: 179kW, weight: 4.2t.

Mobile temperature control unit for water up to 90 °C. Filling quantity: 36.5 l.

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A. Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C. Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

FMB Proxima Tempering machine 2018, stainless tempering machine, 25Kg bowl with agitation, heated vibrating table, 100Kgs per hour, with cooling, mobile, 3Ph