technical used for sale

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,230 mm Number of fields / row of shelves: 01 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 16x Shelf supports, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,425 mm Number of fields / row of shelves: 02 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 32x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 4,815 mm Number of fields / row of shelves: 04 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 05x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 16x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 64x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 17,960 mm Number of fields / row of shelves: 15 pcs. á 1,160 mm Number of levels plus floor level: 04 pcs The scope of delivery includes: 16x shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 60x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 240x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 04x Cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image  ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,010 mm Number of fields / row of shelves: 05 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 20x shelf, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 80x Shelf support, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image m ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 7,205 mm Number of fields / row of shelves: 06 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 07x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 24x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 96x Shelf support, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 8,400 mm Number of fields / row of shelves: 07 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 08x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 28x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 112x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image m ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 10,790 mm Number of fields / row of shelves: 09 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 10x shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 36x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 144x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 03x Cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image  ...

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Description of the Berko compressor model BFA108 (serial number: 080016590), manufactured in 2009: The Berko compressor model BFA108 is a powerful solution for various applications. With its robust design and reliable performance, this compressor provides an efficient compressed air supply for industrial processes, construction sites or other applications. The compressor has been carefully manufactured and is in good condition. Further information on technical details and features can be found in the attached images. All relevant information about the accessories and functions of the compressor is also displayed there. We would like to assure you that we can make the price of this Berko compressor negotiable. If you are interested or have any further questions about the device, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries p ...

The KUKA KPC4 industrial robot from 2014 is a high-quality and powerful solution for industrial applications. This robot provides precise and reliable movements to perform various tasks in manufacturing or automation. The robot is in very good condition and has been carefully maintained. For further information on technical details and properties, please refer to the attached images. There you will find all relevant information, such as working range, load capacity and other specific features. If you would like more information about this industrial robot or have specific questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. We are confident that we can come to an agreement on the price. Please do not hesitate to contact us for more information and possible negotiations. Please note that additional details an ...

RAFAMET KM 4 mechanical folding machine manufactured in Poland in 1990 is designed for producing bent sections from metal sheets with a maximum thickness of 4 mm, made by consecutive folding along the length of the workpiece strip. The highly reliable machine also allows for shaping sheet metal boxes, winding sheet metal edges and making wrapped and crimped connections after installation of special equipment. The folding machine is equipped with a control panel, back stop, workspace illumination and pedal for foot control. The machine has the same design and appearance as its twin folding machine OZAMECH KM 4. The total weight of the machine is 3750 kg. Technical parameters of the RAFAMET KM 4 folding machine - working width of the bending slats: 2000 mm - maximum workpiece length: 1500 mm - maximum workpiece thickness: 4 mm - smallest length of crimped sheet metal strip betwee ...

The YCSA 08 TP air conditioner, manufactured by York, is an efficient solution for regulating room temperature. With its dimensions of 1120x43x90 cm, it fits easily into different environments. The air conditioner has a nameplate with detailed technical data that contains all relevant information. The device is ideal for use in homes, offices or other indoor spaces and ensures pleasant temperatures during the hot summer months. With York quality, you can rest assured that the air conditioner will be reliable and durable. Please note that not all items are immediately available online, as we receive new items every week. If you are interested in this particular air conditioner or need more information, please feel free to contact us. The price from the warehouse is available on request. ---------------------------------------------------------------------- ----------------------- ...

Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...

Electric annealing furnace make NOLZEN type WL 20/16/30Machine -No: 3517 built in 1971 Technical specifications Max. Temperature 1150 ° Internal dimensions 200 x 160 x 300 mm Electrical consumption 6.0 kW Power connection 380 V / 50 Hz External dimensions approx. 600 x 700 x 1000 mm With - Temperature display / timer used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally stiff shell construction • Er ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Serial Number: 121098013092 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally sti ...

Shelf stand: 9,650 mm x 800 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 17,180 mm Number of fields / row of shelves: 06 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 800 mm deep 60x pallet racking beam, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distributed  ...

Shelf stand: 9,650 mm x 1,500 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 22,860 mm Number of fields / row of shelves: 08 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 1,500 mm deep 80x pallet rack traverse, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distrib ...

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,345 mm Number of fields / row of shelves: 09 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 10x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 36x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 72x locking pins, used Version: complete. galvanized To secure ...

Rectangular T-groove clamping plate made of cast iron (hollow body)Technical specifications:Outside dimensions approx: 700 x 1050 x 350 mmNumber of T-slots horizontal: 6Size of the T-slots: 20/34 mmWall thickness: 60 mmVertical elevation each: 3 clamping slotsDistance of T-slots: 150 mmWith- 2 suspension lugsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.38 s Location: Lodz, Poland Year of construction: 2011 Low-speed granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator knives, 18 rotor knives, the sieve - interchangeable Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

Hydraulic Press Brake make Colly Type PS 125/3 Year of construction 1991 Technical specifications: Max. Pressure capacity 125 t Work length 3100 mm Through 2550 mm Stroke 250 mm Drive power 9.0 kWwith - Tools - CNC Control Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...

M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...

aircraft piston compressor Mobilboy 301/50 AC Product name: Reciprocating compressor Mobilboy 301/50 AC Manufacturer: Aircraft Item number: 2004304 Year of construction: 2023 Condition: New device Technical details: • Maximum flow rate: max. 240 l/min • Hopper volume: 50 l • Filling capacity: approx. 150 l/min • Maximum pressure: 10 bar • Sound power level Lw: 96 dB(A) • Cylinders/Stages: 1/1 • Weight: 36.5 kg • a one-hand quick coupling • One pressure gauge each for working pressure and container pressure •Reducer • Powder-coated boiler • Automatic pressure switch • Connection cable length: 1.8 m Engine data: • Power drive motor: 1.5 kW • Power supply: 230 V / 50 Hz • Speed: 2850 min-1 Transport dimensions: • L x W x H: 790 x 330 x 725 mm Our price: €229.00 (EUR) plus VAT from Grunow (Brandenburg) (Subject to  ...

Hongming HM-600E + PK850 Automatic Case Making machine for Book Cover or rigid box The automatic case maker is made up of two models: the HM-600E and the HM-PK850. When these two machines are used together, they form an automatic case making line. 1-Hongming HM 600E Book cover + box glueing and positioning machine Age: 2021 The Automatic Rigid Apparel Box gluing and positioning Machine is an automatic multifunctional equipment for high precision positioning of hard cover and premium rigid boxes. It is suitable for mass production of a variety of rigid boxes such as jewelry boxes, mobile phone boxes, gift boxes, cosmetic boxes, watch boxes, chocolate boxes and some special rigid boxes, etc. Features: 1. Suit to all kinds of rigid box for positioning 2. Suit to all kinds of hard cover for positioning 3. Computer control for all parameter setting 4. Auto error stop and displ ...

ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process, the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitter  Rewinder  Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die- ...

MPS EF330 Servo Flexographic Label Press  Age: 2004  Automatic register control  Web width: 330mm  Servo unwind  BST Electronic web guide  Vacuum web cleaner  8 x Servo Driven Flexo Print Stations  8 x UV dryers  8 x water cooled chill rolls  2 x Rotary Die Stations  Waste Rewind  Edge Slitting Unit  Rewind  BST camera system To include: Magnetics: 80z, 96z, 100z, 104z, 108z, 116z, 124z Print tooling: 7 x 80z, 5 x 96z, 1 x 104z, 6 x 108z, 7 x 116z, 7 x 124z Anilox x 8 Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly) -Online Video Inspection by WhatsApp Video-

Product name: Feeder VSA 2048L Manufacturer: Holzkraft Item number: 5119048 Condition: Brand new Technical details: • max. projection: 1050 mm • Number of PU feed rollers: 4 • Roll diameter: 120 mm • Roll width: 60 mm • Wheel travel: 20 mm • 2-speed transmission • 8 x speeds: 2/4/5.5/6.5/11/13/16.5/33 m/min • Motor power 50 HZ: 0.75 kW • Voltage: 400 V • Weight: 73.5 kg (incl. tripod) • Right-left rotation • Individual adjustment options in vertical and horizontal position for optimal feed •Metal casing • without counter for height adjustment • Dimensions (L x W x H): 1,665 x 220 x 540 mm Price: €1,090.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!)  ...

Prati - Vega Plus LF330 CNT Machine information: Prati converting products are proven in practical applications with selfadhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty slitter/rewinder with missing label checking will rewind rolls on a full automated 3-spindle turret in a perfect register with a max. diameter of 1000 mms and a max. width of 330 mms into smaller sized Rolls. During the process, the labels can be checked for quality and missing Labels. Specifications:  Brand / type: Prati / Vega Plus LF330 CNT  Age : 2014  Min. / max. web width: 150 - 330 mms  Min. / max. paper weight: 90 - 160 gsm  Max. roll diameter unwind: 1000 mms  Max. roll diameter rewind: 400 mms (300 when in use with the 3 shaft turret)  Shaft diameter: unwind: 76 mms / rewind: 40, 50 and 76 mms (3 sets)  Max. speed:  ...

Band saw 400 mm Product Name: Band Saw Type: Model 402 Manufacturer: Country Bulgaria Serial number: 1594 Year of construction: 1980 Condition: used, completely refurbished Technical details: - Table size: 630 x 630 mm - Table inclination: approx. 30° - Cutting height: approx. 220 mm - Cutting width without stop: 380 mm - Saw blade guide with one back roller each at the top and bottom - Belt length: 3,015 mm - Roll diameter: 400 mm - Diameter of suction nozzle: 80 mm -Incl. 2 pieces of saw blades - 10 mm for plastic 1 piece of saw blade – 12 mm for wood 14 saw blades – 18 mm for wood - no stop available ! Engine data: - 380 V / 50 Hz / 2.5 A (see nameplate!) - Power: 1.1 kW - Speed: 1410 rpm Transport dimensions: - Width: 1,050 mm, Depth: 640 mm, Height: 1,850 mm - Transport dimensions (L x W x H): 1,200 x 800 x 2,020, stored on E ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Gallus EMS 410 Servo Flexo Press – 9 colour  Age: 2004  SERIAL NUMBER: 410-13S  Web width: 420mm  Print width: 410mm  Sensotec automatic register control Unwind  E+L electronic web guide  Teknek two-sided web cleaner  Arcotec Corona treater  9 x Servo Driven Flexo Print Stations  9 x IST UV dryers  9 x servo driven water-cooled chill rolls  Partial rail system  Lamination unit  1 x rotary die station with K&B GapMaster)  Waste rewind  Magnetic die crane and hoist  BST Video inspection system  Tubescan 100% inspection camera  Exit nip with die slot  Rewind with 2 rewind shafts  Rewind  Touch screen operator control panel  Anilox: 20 x anilox  Print sleeves: 9x92, 9x96, 9x98, 9x100, 7x108, 9x110, 6x115, 8x144, 6x200  Magnetics: 92, 96, 98, 100, 108, 109, 110, 115, 144, 200 Description ...

Machine information: Flat screen printing - a printing process with impactScreen printing is the ideal process when high coverage, detail accuracy and colour intensity are required to achieve brilliant, high-quality image effects when decorating hollow glass and body printing. Specifications:  Brand/Model: GALLUS T200  Year of construction: 2006  Unwind  Rewind  8 x Screenprinting Units  8 UV dryer, air-cooled  Max. web width: 200mm  Screen Printing webwidth: 175mm  1 Flat die-cutting unit with semi-rotary counter-pressure cylinder Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Lord: Simon Blank Technical data and further information: Shelving system: Jung Heinrich Type: G Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 8,830 mm Number of fields per row of shelves: 04 pcs á 2,145 mm Number of levels plus floor level: 04 pcs. Included in delivery are: 05x wide-span rack stand, used Material color: blue Stand type: M515 Stand profilem.: P 50 x 50 x 1,50 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,350 mm high 1,000 mm deep 32x wide-span rack trusses, used Material color: yellow Z-profile: 50 x 30 mm clear width: 2,145 mm load per pair of trusses 500 kg at the same. distributed load 64x safety pins, used Version: completel ...

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished

MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...