technical used for sale

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 10.19 Working pressure max bar: 7,5 Total power installed kW: 63 Rotation speed max rpm: 1465 Weight Kg: 1480

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!

TECHNICAL DATA: Drive: Battery Technical type: Forklift Carrying capacity kg: 1000 Barycenter mm: 500 Passenger seat: Yes Cabin: Open Number of wheels: 3 "Bolzoni" clamps - PB 08 ENA

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Key data: 4200 , 2200

PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system  ...

PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

bore depth: 8850 mm swing diameter: 1000/900 mm total power requirement: 129 kW weight of the machine ca.: 47 t dimensions of the machine ca.: m core drilling diameter max.: mm CNC control Sinumerik 840D diameter of the face plate 1200mm steady rest chip conveyor Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm Max. Bohrtiefe / max. drilling depth 8850 mm Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm Drehzahlbereich / spindle speed 1-300 U/min Vorschubbereich / infeed 0,5-4500 mm/min Antriebsleistung / drive capacity 129 kW Werkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mm Max. Aussendurchmesser / max. outer diameter 900 mm Max. Werkstücklänge / max. workpiece lenght 8000 ...

pressure: 40 t table length: 670 mm table width: 570 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m wheel away & tiltable table hydraulic ejector upper plate movable Technische Daten / technical details: Druckkraft / pressure 40 to Durchgang zw. den Ständern / daylight between columns 620x470 mm max. Einbauhöhe / max. day light 740 mm Hub / stroke 770 mm Tischgröße / table size 670x570 mm Antriebsleistung / drive capacity 9,5 KW Gewicht der Maschine ca. / weight 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

TECHNICAL SPECIFICATIONS Manufacturer: GFA Name: Banana sieve Type: 1P 4000/1800 Design: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Sieve dimensions (length/width): 4,000 x 1,800 mm Separation deck 1 at: 2 mm (Isenmann) Weight: approx. 7,000 kg Drive power: 7.5 kW TECHNICAL SPECIFICATIONS Manufacturer: GFA Description: Banana screen Type: 1P 4000/1800 Version: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Screening dimensions: 4,000 x 1,800 mm Separation deck 1 at: 2mm (Isenmann layer) Weight: approx. 7,000 kg Drive power: 7.5 kW

TECHNICAL SPECIFICATIONS Manufacturer: METSO (SALA series) Description: Sludge Pump / Solids Pump Type: VT 50 Design: Vertical tank pump Year of construction: 2006 Outlet flange diameter: 50 mm (2") Throughput depending on head: 10 - 30 cbm/h head: approx. 22 m Diameter tank: 1,010 mm Volume setting barrel: 0.25 cbm Empty weight: 305 kg Drive power: 5.5 kW Speed: 1440 rpm (r/min) TECHNICAL SPECIFICATIONS Manufacturer: METSO (SALA series) Description: Slurry pump / Solids pump Type: VT 50 Version: Vertical tank pump Year of construction: 2006 Diameter outlet length: 50 mm (2") Throughput deppending on delivery head: 10 - 30 cbm/h delivery head: approx. 22 m Diameter tank: 1,010 mm Volume setting tank: 0.25 cbm Empty weight: 305 kg Drive power: 5.5 kW Rotational speed: 1440 r/min

SATURATOR WITH NAGEMA KOMI 160 MIXER Mix saturator - new control cabinet with documentation. Technical condition: used, for technical inspection Capacity 960 l Capacity 16 000 l/h

Diesel forklift Machine Brand: DOOSAN Designation: D90S-5 Year of production: 2012 Counter Reading (mtg): 7970 Empty weight (Kg): 12197 Lifting capacity (kg): 9000 Height. lift. (mm): 3100 Lateral fork travel Mast type: STD UDT review until March 2022 Fuel type: diesel After a large technical inspection for over PLN 30,000 (we have invoices for everything) - new tires - new fore fore fore - regeneration of actuators, - gearbox: discs + sealants - brakes: discs and bearings - all oils, liquids and filters Technical condition: used, very good

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

grinding diameter: 350 mm grinding length: 1040 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m internal grinding device magnet clamping chuck coolant device tail stock Technische Daten / technical details: Spitzenhöhe / center height 180 mm Spitzenweite / center to center 1120 mm max. Schleiflänge / max. grinding lenght 1040 mm gr. Werkstückdurchmesser / max. work piece diameter 350 mm Schleifscheibenabmessungen / grinding wheel diamensions 400x63x127 mm Schwenkbarkeit des Tisches / table swivable 9 ° Drehzahl Schleifspindel / spindle speed 32 m/s Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,5 kW Gewicht der Maschine ca / weight ca 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine a ...

Technical specifications Year of manufacture 1972 Working width mm 220 Planing height mm 120 Number of spindles 5 Spindle configuration b-r-l-t-b Spindle rotation speed max 1/min 6000 Infeed table length mm 2500 Feedrate max m/min 36 Type of feed roller drive Chain Further technical details Bottom spindles 2 Right spindles 1 Left spindles 1 Top spindles top 1 Spindle diameter mm 40 Seperate motor per spindle Lubrication pump manually Pneumatic top pressure Continuously variable feed Total power, kW 32 Weight kg 3700

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Horizontal sieve Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of construction: 1974 Screen covering: Steel screen mesh Weight: approx. 7 t Drive cable: no drive available SPECIFIC COMMENT - Incl. outlet tray and trigger belt (if desired) - Incl. approx. 30 steel screen coverings - Robust steel construction If you are interested, we can send you an offer with photos. EuroConsult Dimitrios Piretzidis TECHNICAL SPECIFICATIONS Manufacturer: IBAG Description: Horizontal screen Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of manufacture: 1974 Screen deck: steel screen cloth Weight: approx. 7 t Drive: no drive available SPECIFIC COMMENT - Incl. discharge trough and discharge conveyor (if required) - Incl. approx.  ...

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Product name: Compressor Manufacturer: Kaeser Type: EPC 340-100 Article number: 1.5746.7 Year of construction: 2011 Condition: in good used condition, checked technical details: operating pressure: 10 bar • Delivery quantity: 230 l/min (6 bar) • Speed: 1,500 rpm • Container: 90 l • Weight: 73 kg without consoles (per console 15.0 kg) • Sound pressure level dB(A): 73 Engine data: • Motor: 400 V, 1.7 kW Metrics: L x W x H: 1,120 x 350 x 910 mm Transport dimensions: • L x W x H: approx. 1,200 x 800 x 1100 mm • Transport on pallet: 1,200 x 800 mm Our price: 839,00 € (EUR) FP plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Type VL 1500-2/14000 Vacuum filter 2 PC Type: VL 1500-E Technical specifications: Length 2520 mm Width 1900 mm Height 1560 mm Filter performance max. 1200 l/min per filter unit Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

Vacuum filter 1 PC Type: VL 1500-E Technical data: Length 2520 mm, Width 1900 mm, Height 1560 mm Filter flow max. 1200 l/min Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double Knee Lever Jaw Crusher Type: DBS1200x960 Year of construction: 1979 Version: Heavy version for hard rock Drive power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. pusher SW1250x4000 - Incl. stepped grate with pre-screening - Incl. control unit TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double toggle jaw crusher Type: DBS1200x960 Year of manufacture: 1979 Version: Heavy duty for hard rock Driving power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. step grate with pre-screening - Incl. control unit If you are interested please let us know, we appreciate to send you a detailed quotation. EuroConsult Dimitrios Piretzidis

USED TOURNAIRE NUTSCHE FILTER 0.23 M2 STAINLESS STEEL REF.: C4751 General characteristics: Manufactured by TOURNAIRE Material Stainless steel Year built 1999 Technical characteristics: Capacity Cuerpo: 120 L Technical characteristics: Work pressure -1/+3 bar Work temperature -20/+150 ºC Filtration area 0.23 m2

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6842 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Rotational speed 1400 rpm Reducer characteristics: Rotational speed 25 rpm

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6843 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Reducer characteristics: Rotational speed 15 rpm

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6845 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Power 2.1 kW Rotational speed 690 rpm Reducer characteristics: Rotational speed 15 rpm

2 assembled aluminum circular saws make EISELE type LMS III PVMachine -No: 2224 + 2225 built in 1988xa0Technical specifications:Saw blade size: 400 x 4.0 x 40 mmCutting area 90 °: 500 x 140 mmhor. 45 ° L + R: 400 x 140 mmvertical 45 ° L: 500 x 90 mmVenetian blind box profile: 500 x 152 mm(with saw blade 410 mm)Saw blade speed: 2800 rpm.Drive power: 2.6 kWWeight per piece: 670 kgExternal dimensions per piece: 1800 x 800 x 1300 mmWith- hydr. stepless feed- Spraying device2 identical saws LMS III PV - mounted together on a base frame - for cutting larger widths and mitres 45 ° L and 45 ° R!The saws are sold together or single!If the saws are sold together, a designated cabinet is included.The saws come from a CNC controlled profiling machineThe technical. Data concerns 1 machine. When taken over and used in the now inflated state (both machines assembled opposite each other), the machi ...

Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make CSEPEL type RF 20Masch. -No: 69027Technical specifications:Technical specifications:Drilling capacity in steel: 40 mmDrilling performance in GG: 50 mmTapping up to: 50/60 mmThroat: 1600 mmQuill stroke: 300 mmSpindle mount: MK 512 spindle speeds: 45 - 2000 rpm.9 automatic feeds: 0.05 - 1.25 mm / rev.Column diameter: 360 mmsmall / large Spindle distance from base plate: 350/1420 mmPlaten size: 1675 x 930 mmPower of the drill motor: 3.0 kWtotal installed power: 4.97 kWWeight approx .: 3.2 twithout pictured cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Single-edge milling machine make DECKEL type SOMachine -No: 81659 built in 1981 (table model)Technical specifications:Tool holder: 17.5 mmTaper collets: MK 1 / MK 2 / GAGrinding spindle speed: 4500 rpm.Adjustment of the tool holder: 10 mmLongitudinal shift: 40 mmMax. Relief grinding angle: 45 °Drive power: 0.25 kWSpindle speed: 2800 rpm.Weight approx: 32 kgExternal dimensions approx: 510 x 565 x 290 mmWith- grinding wheel- several colletsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single-edge milling machine make DECKEL type SOMachine -No: 0221 (table model)Technical specifications:Tool holder: 17.5 mmTaper collets: MK 1 / MK 2 / GAGrinding spindle speed: 4500 rpm.Adjustment of the tool holder: 10 mmLongitudinal shift: 40 mmMax. Relief grinding angle: 45 °Drive power: 0.25 kWSpindle speed: 2800 rpm.Weight approx: 32 kgExternal dimensions approx: 510 x 565 x 290 mmWith- grinding wheel- several colletsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Laser cutting system make LSS LASER LAB type CONTOUR 3015/ 020 SLABTechnical specifications:Cutting area: 3000 x 1500 mmLaser source :Rofin-Sinar Laser DC 020- Output Power Range / Guaranteed:200 - 2000 W/ 2000 W- Performance stability:+- 2% (24h)- Laser beam quality Drm. : < 25mm- Beam index: K > 0.8- Pulse generator, pulse frequency: 0 or 8 - 5000 Hz Pulse Width: 26ms-CW- Laser gas: Rofin-Sinar special premix Consumption: < 0.3 Nl/hCutting capacity (according to the LSS company) approx. :10 - 12 mmRapid traverse: 10 m/min.programmable Z axis: 175 mmHigh-pressure cutting up to:20 barBeam data: 10.6 kgBeam quality: 20 - 25 mm K09Directional Stability: 0.15 mrad.Polarization linear:45°Pulse characteristics: 2 - 5000 HzLaser gas: 0.15 NL/h.Laser head dimensions: 1700 x 800 x 853 mmWeight laser head approx.: 500 kgDimensions control cabinet: 800 x 600 x 1900 mmWeight control cabinet approx ...

Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding.  ...

Measuring machine make MORA type 0190Fabr. -No: 16079/0888 year 02/88 for measuring rotational parts(as used to measure propellers)in 2 levels, in conjunction with a pivot point with encoderMeasuring height: 1500 mmMeasuring width: 1200 mmDistance of the pivot point from the measuring stand: 1400 mmInstallation height from the chuck to the highest position of the chuckProbe: 1260 mmChuck with inner jaws: 240 mm Drm.Space requirement with internal jaws: 2550 x 750 x 2550 mmWeight estimated approx .: 700 kgWith- Digital display with keyboard for X and Z attached to the machine- Turn-Check-Program MS-DOS Version 1.3 for measuringxa0propellers- EPSON FX 1000 printer- Calculator PEALOCK- Monitor- Measuring head RENISHAW with various buttons- technical documentsused, from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Pay ...

Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine type: 4 TNV 98 T Engine No.: 180067 Motor power: 37.7 KW Cooling: Water-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator Type: ECP32.2S4C Gene. Item #: P217148 Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 pole Delivery: Assembled Width approx. mm: Height approx. mm: Depth approx. mm: Tank: Design: Base frame tank with drip tray Width approx. mm: Height approx. mm: Depth approx. mm: Content / Litre: 100 Dimensions of th ...

TECHNICAL DATA: Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of construction: 2001 Drive power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT - Spur gear adjustable on both sides (left/right) - General overhaul 2012, since the reserve gearbox - Incl. new on-board disc and multi-wedge shaft (overhaul 2011) TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of manufacturing: 2001 Drive Power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT: - Spur gear adjustable on both sides (left/right). - General overhaul 2012, sinve then reserve - Incl. new flanged pulley and splined shaft (overhaul 2011)