technical used for sale

– after technical inspection – very good condition – year of production 1995 TECHNICAL PARAMETERS: turning length max. 1300 mm turning diameter 120 mm three bottom knives five top knives support hydraulic knife control automatic control magazine dimensions of the machine (L/W/H) 380 / 210 / 215 cm weight ~ 3490 kg

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

Technical data for the crate rack: Shelving system: SSI Schaefer Type: R3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,056 mm Number of shelves / row of shelves: 01 pcs. á 994 mm Number of levels plus floor level: 07 pcs. The scope of delivery includes: 02x Shelf Stand, Choice II Material colour: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. transverse and diagonal struts The stands are unassembled 1,534 mm high 300 mm deep 07x shelves, second choice Material colour: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / piece: approx. 2.64 kg max. load per floor at Evenly distributed load: 100 kg 01x Cross Association, Second Choice Type designation: KV31013 Material colour: sendzimir galvanized  ...

Technical data for the crate rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of shelves / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts Weight / piece: approx. 7.80 kg The stands are pre-assembled 1,700 mm high 610 mm deep 04x Shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 04x Balance plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material colour: sendzimir  ...

– after technical inspection – very good condition TECHNICAL PARAMETERS: saw wheel diameter 1100 mm saw wheel width 105 mm element height up to 380 mm maximum element width 375 mm cutting width to the right of the saw 170 mm cutting width to the left of the saw 205 mm feed speed adjustable 5 – 40 m / min ten feed rollers roller diameter 110 mm hydraulic material pressure rolls for material return electric belt tension cleaning of belt wheels ENGINES: main 22 kW hydraulic pump 3 kW belt tension 1,5 kW transport dimensions (L/W/H) 380 / 245 / 160 cm weight ~ 2700 kg The band saw is designed for longitudinal sawing of beams, edges and scoots. They are widely used in the sawmill, carpentry and furniture industries. These machines are characterized by high reliability, simple operation and high efficiency. The use of a tilting guide in the sawing  ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Technical data for the crate rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of shelves / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 06 pcs. Note: Since these are second-hand goods, damage, rusting, etc. exist. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts Weight / piece: approx. 7.80 kg The stands are pre-assembled 1,700 mm high 610 mm deep 06x Shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 04x Balance plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Materi ...

Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of shelves per row of shelves: 01 pcs. á 1,290 mm Number of shelves plus floor level: 05 pcs. Currently available in stock: approx. 30 shelf sets The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts Weight / piece: approx. 7.80 kg The stands are pre-assembled 1,700 mm high 610 mm deep 05x Shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 04x Balance  ...

Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,500 mm Number of shelves per row of shelves: 05 pcs. á 1,290 mm Number of shelves plus floor level: 05 pcs. Currently available in stock: approx. 30 shelf sets The scope of delivery includes: 06x Shelf stand, second-hand Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts Weight / piece: approx. 7.80 kg The stands are pre-assembled 1,700 mm high 610 mm deep 25x shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 12x S ...

– after technical inspection – good condition – Italian production TECHNICAL PARAMETERS: wheel diameter 800 mm cutting height 420 mm .max. width of cut material 780 mm cutting width at a ruler of 575 mm cutting width using rollers 195 mm .max. width of material cut with a feed of 355 mm .max. cutting belt width 40 mm top and bottom belt guidance feed speed range 0-12.5 m/min feed speed adjustable on the inverter feed roller height 140 mm pneumatic feed pressure main engine 4 kW feed motor 0.75 kW connection diameter 100 mm dimensions (L/W/H) 260 / 165 / 115 cm weight 700 kg

Injection moulding machines Dr. Boy Boy 55 A Stock No.: 503233 Manufacturer: Dr. Boy Type: Boy 55 A Control: Procan Year of construction: 2003 Operating hours: 64000 h Technical data closing page Clamping force: 550 kN Holmass v: 360 mm Holmass h: 335 mm Panel size h: 530 mm Panel size v: 500 mm Installation height min.: 250 mm plate pitch max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 42 kN Technical data spray side Screw diameter: 32 mm Displacement: 76.5 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.25m x 1.09m x 2.04m Total weight: 2250KG Equipment On-screen text german Core tension hydraulic 1x Levelling elements

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a dia ...

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

– after technical inspection – very good condition TECHNICAL PARAMETERS: maximum grinding width 1100 mm maximum element height 160 mm minimum grinding height 3 mm main engines 2 x 11 kW feed motor 2,2 kW height adjustment motors 0,37 kW 1 65 shore rubber shaft with a diameter of 270 mm 2 45 shore rubber shaft with a diameter of 400 mm belt size 2600 x 1050 mm two types of feed speed pneumatic oscillation at the ends connection diameter 2 x 150 mm tape in very good condition dimensions (L/W/H) 280 / 180 / 250 cm weight ~ 2600 kg

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

Working width: 630 mm Working height: 3-310 mm Motor output: 7,5 kW Number of knives: 4-TERSA St. Feed speed: 6-20 m/min. Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE Partnership Edition Technical specifications: ----------------------------------------------------- Working width: 630 mm 4-knife cutterblock system TERSA, d=120mm: 4,800 rpm max. chip removal planer according to CE: 8 mm min./max. Thickness passage: 3/310 mm Minimum workpiece length: 250 mm Feed speed: infinitely variable 6 - 20 m/min. Motor 380 Volt / 50 Hz.: 7.5 kW with manual star-delta switch Sound level according to EN 27960: 86 - 90 dB(A) basic equipment: Thicknessing table adjustment via 4 trapezoidal thread spindles Electromotive thicknessing table lift with electronic positioning device Electronics according to CE standard Magneti ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Machine Details Stock number 1105-03762 Machine type machining center - vertical Brand HURON Type VX 12 Year of construction 2012 Control type CNC Storage location FRANCE Country of origin france Delivery time immediately Freight Base EX WORK Price Technical details x-travel 1220 mm y-travel 600 mm z-travel 610 mm Total power requirement 10/14 kW Machine weight ca. 10 t Information electr. Equipment, coolant equipment, technical documents. CNC SIEMENS 828 D SHOPMILL SPAENEFOERDERER 8000 RPM WITH GETRIBESTUFFE SK 40 MAGAZINE 20 TIMES

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...

The machine is in good technical condition. Spindle passage: 42mm Counterspindle Lots of accessories included - collets, counterspindle jaws, double sided tool holders, some spare parts. Original technical documentation for the machine (instructions, diagrams, etc.) Bar feeder included. By prior arrangement, the possibility of a tour in progress.

Machine in good technical condition, possibility of testing after agreement. Technical parameters: - spindle passage: 105 mm - max. circulating diameter above the bed: 630 mm - max. rotating diameter above support: 400 mm - max. diameter for turning: 630 mm - max. turning length: 1800 mm - axis displacements: X 350 mm Z 1810 mm Machine weight: 3800 kg

The machine is in good technical condition, inspection possible upon agreement. Technical parameters: Machine weight: 6400 kg Circulating diameter above the bed: 800 mm Circulating diameter above support: 520 mm Distance between spikes: 3000 mm Machine dimensions L x W x H: 5560 x 1570 x 1700 mm

Catalog No. 6804 TECHNICAL DATA - max width of the workpiece 240mm - max height of the workpiece 130mm - spindle diameter 40mm 4 spindles: 1) horizontal bottom 240mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 5.5kW 4) horizontal top 240mm 4kW - all heads adjustable up / down, right / left - all spindles equipped with an electric brake - from above, 4 metal, toothed introductory rollers - rubber, smooth, pulling roller from above - rubber, sliding roller at the bottom - 2 types of feed speed - feed motor 1.25kW - feed on cardan shafts - rollers pressed pneumatically - length of the introductory tabletop 2500mm - electric planing thickness setting - diameter of the exhaust connection 3x120mm, 150mm - dimensions length/width/height 3900x1650x1600mm - weight 1640 kg – Italian production – technical documentation – unpainted - ...

– after technical inspection – year of manufacture 2017 – ATEX marking TECHNICAL PARAMETERS: fan power 15 kW flow rate 8000 m3/h compression 4603 Pa vibrating system for self-cleaning filter bags 2 x 0.12 kW Connection diameter 300 mm dimensions (length / width / height) 490 / 125 / 360 cm SET OF PIPES INCLUDED: – 6 pieces diameter 300 mm length 1250 mm – 2 pieces knee 90° – pipe set with tee diameter 250 mm, length 1400 mm – tee 300 mm by 2 x 250 mm – knee 45° – knee 15°

– after technical inspection – very good condition TECHNICAL PARAMETERS: saw wheel diameter 1100 mm saw wheel width 105 mm workpiece height up to 380 mm maximum width of the element 375 mm cutting width to the right of the saw 170 mm cutting width to the left of the saw 205 mm feed speed adjustable 5 – 40 m / min ten feed rollers Roll diameter 110 mm Hydraulic material pressure rollers for material return Electric belt tension Belt wheel cleaning ENGINES: main 22 kW hydraulic pump 3 kW belt tension 1.5 kW transport dimensions (length / width / height) 380 / 245 / 160 cm weight ~ 2700 kg

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Max working thickness (S235): do 8.0 mm - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OR 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...

Technical details: - Min. blade length: 4,330 mm - Max. blade length: 4,430 mm - Possible saw blade widths: 6 - 25 mm - Max. blade thickness: 0.6 mm - Cutting speed: 1,168 m/min - Roll diameter: 600 mm - Cutting height: 360 mm - Cutting width: 570 mm - Table length: 580 mm - Table width: 580 mm - Diameter of suction nozzle: 100 mm - Mobile on wheels, 1 x wheel brake available - With motor brake, can be unlocked for changing the saw blade Engine data: - Power: 2.2 kW - Voltage: 380 V - Current: 5.5 A - Frequency: 50 Hz - Speed: 2,890 rpm Accessories: - incl. 1 x saw blade 9 x 4,430 mm - incl. 1 x saw blade 15 x 4,430 mm - incl. 1 x saw blade 25 x 4,430 mm (already mounted on machine!) - incl. 1 x saw blade 30 x 4,430 mm (Note: Use is not recommended by the manufacturer.) Dimensions (LxWxH): 1,118 x 750 x 2,113 mm Transport Dimensions = Machine Dimensions  ...

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

2 pieces Ultrasonic Wheel Washer, Performtec / Tiresonic, BIGWHEEL 4 Wheel Washer – used- : Price per piece ex site: 12.500.-€ (net)! Manufacturer: Performtec / Tiresonic BIGWHEEL 4 Wheel Washer Year of manufacture/washes performed since purchase: - 2019/18.795 - 2020/18.003 42031 D TIRE RWA 302 TWIN 001000 Wheel washer ultrasonic car, type RWA 302 TWIN Serial number : 431013 L + 231014 R incl. accessories: -Workbench - Main switch IP 67 + self-adjusting bearing - 2 x Truck Clamping Cone, 2 x Car Clamping Cone - 2 x 14 inch adapters - Power Clean Agent, Multiboss bath cleaner - Instruction manual and quick operating instructions - Information sheet on washing-up liquid and void of warranty in case of Use of third-party detergents or third-party additives or sprays Original price: approx. 22.000.-€ (net) / piece Condi ...

DURMA E 2040 CNC press brake which was built in 2009 in Turkey, offers the highest productivity and precision in workpiece bending, while maintaining low operating costs. The machine performs excellently even during the most intensive processing thanks to its extremely stable design, high press force of 40 tonnes and intuitive CNC control DURMA DU 6000. The work area is protected by the DFS LASER photoelectric safety device, which automatically switches off the machine’s power supply in the event of an interruption of the emitted laser beam. The price also includes tooling shown in the photos, worth 15 500 PLN. The DURMA E-2040 press brake weighs 4060 kg. Technical data of the DURMA E 2040 CNC press brake - CNC control: DURMA DU 6000 - maximum press force: 40 t - maximum workpiece length: 2050 mm - slider stroke: 160 mm - reach: 350 mm - distance between columns: 1650 mm - ap ...

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

turning diameter: 350 mm turning length: 532 mm control: Mazatrol Smart total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zube ...

Emergency generator set 130 kVA Volvo Penta Demonstration machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine type: TAD 532 GE Engine no.: 5312957504 Motor power: 112 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 274 E Gen.Nr. N22G276184 Generator capacity: 130 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.140 Height approx. mm: 1.933 Length approx. mm: 2.990 Weight approx. KG: 2.050 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediately Ve ...

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...