We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.
used
used
used
Sell a used 3D printing system, Manufacturer: 3D Systems, Type: ProJet 3510 SD 3D Printer, Printing mode: High definition, nice space (xyz): 298 x 185 x 203 mm, resolution ( xyz): up to 375 x 375 x 790 DPI/ 32 layer thickness, accuracy (typical): 0.0025 - 0.05 mm each 25.4 mm of partial dimension, email notification: yes, remote monitoring: yes, uvm Build Hours 953h In addition, a CAD program: 1 pc. Solidworks Network Installation FEE. 1 Liz. Solidworks 2015 Standard 3D â CAD. 1 Liz. Solidworks Professional 3D â CAD. 1 pc. MoldWorks + SplitWorks + ElectrodeWorks. 1 Liz. Solidworks Plastics Standard. SUB End of April 30, 2017
used
used
used
used
used
used
Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
There is a large item available to Zebra printer 140 and 170 width Versions Xi2-Xi4 Zebra's super-fast and durable 140Xi4 is easy to integrate and provides high reliability for action-critical applications. The 140Xi4 is super fast at 356 mm per second. This high performance and its steel sheet construction make it the ideal printer for high-throughput, high-throughput applications. The 140Xi4 is also well-used for applications where labels are needed quickly, either on demand or in larger quantities.
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...
used
DESKTOP METAL STUDIO SYSTEM 2 3D printer (year 2018) Ideal printer for printing high-performance metal parts in the office. Desktop Metal’s Studio System 2 Metal 3D Printer extrudes a metal filament (in the form of rods) to create the desired geometry. You don’t need a removal step for the plastic binder that holds metal dust in a filament (or associated equipment) when printing with 316L stainless steel. Impressions from the Studio system are transferred directly to the accompanying furnace, which first heats the parts to remove all binders from the parts, then increases the temperature to nearly melt for sintering. This printer is working and live demo can be done. Work hours: Printer: 164 jobs x 10h = 1640h Debinder: 46 jobs x 18h = 828h Furnance: 21jobs x 48h = 1008h Includes software and transformer to convert the American frequency into European.
used
Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.
used
IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...
used
Offer consists of: - High-performance finisher DocuCutter DC-745 Duplo DocuCutter DC-745 High-performance finishers for digital color printing: - Investors: Suction/blowing air feeder with alignment line - Operation: via LCD display - PC included - Software included - Business card module - Job memory: 80 memory slots for retry jobs - Error avoidance: Ultrasonic double leaf control Control compartment Test running program Print mark reading - integrated knife 6x 2x Edge cut 4x for card cutting - Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Speed: 50 sheets/minute - Current: 230V / 50Hz / 2.7A, 550W - Dimensions: 3.040x1.020x1.115mm - Weight: 450kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing o ...
used
STANDARD-EQUIPPED
used
Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.
used
50 Zebra label printers Are sold here Thermal Transfer / Thermodirect as a package Printers originated from insolvency and were still in use until closure
used
Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...
used
Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.
used
Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg
used
used
used
used
used
used
Pad printing machine: Manufacturer: Tampomark Model: TM 85-2 C year: 2010 (ran very little) closed color system 2-colored electro-pneumatic Technical specifications: Cliché format: 100mm x 200mm Squeegee cups: W 85mm Printing format max .: 75mm Printing force: 110 kg Output: up to 1200 cycles / hour Weight: 136 kg Pneumatic connection fine filter: 6 bar Operation: Digital display with piece counter Equipment: Machine base on castors, height-adjustable cross table 2 magnetic holding plates 2 squeegee cups (including 4 new squeegee rings) 2 pad holders incl. Pneum. Pad displacement foot switch Location: germany Price: on request
used
Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm
used
used
A3 Colour multifunction printer Canon iR Advance C5030i Scanner Printer Copier Finisher C1, used perfect condition, serviced by Canon service partner Features: - A4 30 ppm (B&W/colour) - A3 18 ppm (B&W/colour) - Grammages 52-266 g/m - Color Image Reader-N1 with DADF - Cassette base cabinet - Cassette feeder unit AD1 cassettes 2 x 550 sheets - Paper magazine B1 2,700 sheets (80 g/m²) - ColorDuplex Scanner B1 600 dpi - Cassette unit AD1 - Finisher C1 - UFR II, PCL5c/6 - PDF with tracing and smoothing - OCR (searchable text) PDF/XPS - Scan extensions PDF - Office Open XML - Weight approx. 200 kg Meter readings read 112 total (black/large) 113 101 total 1 2293 102 total 2 2476 106 total (full color 2) 1213 109 Total (black 2) 1263 915 SE Scan total 2 (color) 0 916 SE Scan total 2 (Black) 0
used
used
used
used
Hot print maschine,stainless steel,Elmoprint type M80 H
used
Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Reference Num.: 3734 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Reference Num.: 3070 Brand: Heidelberg Type: GTOZP 46 Construction year: 1978 Impressions: 97 mio Size: 320 x 460 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 320 x 460 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 1,270 mm, Width: 1,200 mm, Height: 1,550 mm Total weight: kg 900 / lbs 1,984 Equipment: - Wendung - konventionelles Feuchtwerk - Puderapparat Weko - Doppelbogenkontrolle
used
STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...
used
Reference Num.: 3662 Brand: Heidelberg Type: QM DI 46-4 Construction year: 1997 Impressions: 9 mio Size: 460 x 340 mm Available: directly Status: In production Location: Deutschland Sheet size: min 140 x 89 mm, max 460 x 340 mm Printing speed: max 10,000 sheets/hour Printing units: 4 Paper thickness: 17.72 mm Machine size: Length: 2,450 mm, Width: 2,550 mm, Height: 1,900 mm Total weight: kg 3,800 / lbs 8,378 Power: KW 11 / hp 11
used
OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display
used
M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg
used
Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.
used
Semi-automatic ink-jet marking system for thin profiles, rods and tubes With Domino inkjet printer
used
Item condition: maintained Availability: immediately Printheads clean and rinsed: yes The A300 offers consistently high quality – across a variety of formats – even in the harshest environments. The robust and durable housing made of 316 stainless steel offers excellent protection against dust and water. Thanks to the unique self-cleaning ink system and our patented SureStart operation with a single press, the total cost of ownership is low with minimal operator intervention. It's the perfect choice when you need a rugged, flexible printer that offers maximum productivity.
used
Number Of Colours: 6 // Rim Diameter (Max): 208 mm
used
Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg