129,176 used machines on RESALE, but how to find them? Machine Search
Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3100 ( 2200 + 900 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW ...
Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in mm (NB) ...
Transnorm inclined roller conveyor 3130-1180-840 RA1865 Make: Transnorm Roller width (RB): 840 mm Nominal/outer width (NB): 1180 mm Length: 3130mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Optionally available: Supports frequency converter for freely adjustable Conveyor speed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 3130 Nominal / outside width in mm: 1180 Roll width in mm: 840 Roll division in mm: 55 Driven: YES Engine type: 2 x SEW Getriebemotor scope of delivery: ohne Frequenzumrichter, inklusive 2 x SEW Getriebemotor For individual, expert advice, simply get in touch with us. Simply ...
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x
Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.
For sale is an unused Kambic I-250 CKA refrigerated incubator. For technical data, see Appendix.
- 1-lane rotary runner - Max. 2,400 cups / hour - Up to Ø95 mm cup conversion possible - Dimensions approx. 1,300 x 1,300 x 2,000mm - Year of construction approx. 1960s (unfortunately no more nameplate)
2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -
2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -
package of 16x pieces Find more here - / Contact us at -
Height=2.17 m, Overall length= 0.62 m, Overall width= 1.6 m, Net weight= 265 kg,
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,
Height=1.16 m, Overall length= 1 m, Overall width= 1.23 m, Net weight= 212 kg,
Height=1.4 m, Overall length= 0.95 m, Overall width= 1.5 m, Net weight= 160 kg,
Height=1.32 m, Overall length= 0.75 m, Overall width= 1.7 m, Net weight= 155 kg,
Height=1.1 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 134 kg,
Height=1.36 m, Overall length= 1.43 m, Overall width= 0.9 m, Net weight= 325 kg,
Height=0.98 m, Overall length= 0.85 m, Overall width= 1.7 m, Net weight= 580 kg,
Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,
Height=1.56 m, Overall length= 0.86 m, Overall width= 2.16 m, Net weight= 250 kg,
Height=2.3 m, Overall length= 1.3 m, Overall width= 2.45 m, Net weight= 1035 kg,
Height=2.022 m, Overall length= 0.75 m, Overall width= 1.6 m, Net weight= 750 kg,
Hot melt / melter for packaging industry for sealing cartons ProBlue 4 1022230A Serial Number: SA06C26938
DC Norris 2700 Industrial Wok Serial: 2827 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
Height=1.33 m, Overall length= 0.61 m, Overall width= 1.08 m, Net weight= 225 kg,
Key data: 220 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...
Kuka robot KRC2sr + KCP2 + KR5 sixx R850 Number of axes: 6 Max. load capacity: 5 kg Max. intervention: 850 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. Shipping costs within Germany 95€.
Memmert Precision Incubator 256 litres Manufacturer: Memmert Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 litres Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of slide-in plates: 7 Max. load per slide-in plate: 30 kg Max. load per device: 80 kg Weight: 144 kg More items - new and used - can be found in our shop! International shipping costs on request!
Robot ABB Robotics IRB 1600 8/1.45 IRC5 M2004 , complete Control: IRC5 M2004 Number of axes: 6 Max. load capacity: 8 kg Max. working range: 1450 mm Year of Make: 2008 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Forwarding costs on request or pick-up on site.
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,
Robot ABB IRB 2600 20/1.65 IRC5 M2004 , mechanics only Number of axes: 6 Max. load capacity: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Shipping costs on request or pick-up on site. Price indication per item.
Agilent 5110 SVDV which YOM 2018 for sale. It's an complete set including chiller, autosampler SPS4 and software.
For sale: Plotters, inkjet printers, in need of repair Manufacturer: HP Type: Designjet 500 Print size: A1 Areas of use: CAD plans, posters, architect plans, pictures, etc. Condition: in need of repair, Error code: 21:11 Fixed price: 250 Euro Extras: 15x paper rolls A1 /HP/Rauch. Price 150 euros extra!
4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008
General: Year of construction 2002 Power 1.5 kW Weight 172 kg
Injection moulding machine Engel e-motion 2440/380 T BJ 2008
2 x Husky HL500RS80 2016 injection moulding machines
1 Waldner cup filling machine Round version, 2 cups/bar 95 mm with slip-on lid, Type Dosomat 1.2, No. 2070 Capacity 4,200 U/h, Year of construction 2014 with main feeder, circuit board Welding and slip-on lid feeding spout on round plates, Packing in crates by hand. Roller conveyor for the discharge of the filled Get.
Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001
1 Galdi Gibelkarton filling machine for long-life fresh milk Type ESL milk with 30 days BBD Galdi model RG27Packaging format 1l, 0.5 l and 0.25 Cap at the moment OSO30 from 18.11.2025 (cap retaining ring) Year of Make: 2017 Operating hours September 2025 29,000 h Product ESL Milk, Soy & Oat Milk Performance 7,200 With outfeed belts, cap transport and our own CIP Most important spare parts package at 35,000 euros, still to be negotiated without ET
1 A&F Butter Pieces Carton Packing Machine Molded Butter Carton Packing machine for 2 pieces of butter By A&F Jagenberg Group Formats: 25p0 g, xxx g Type: 720/2.25.W4 Item no.: 930390 B Built in 1994 With garage content behind the A&F machine
2 Elopak aseptic filling machines Gable format with 3 pack sizes 0.25, 0.75 and 1.0 l Both machines built in 2003 Type: Pure Pak PA 830 Serial No. 22064 Capacity: 2 x 10,500 E/h with Lid Storage Magazine with 3 co-rotating Elopak lid applicators with cardboard packing machine for 12 E/carton with complete palletizing system with pallet shrink-wrapping machine and b.) 2 complete process technology plants for fruit heating as plate heating systems and 1 sterile tank each, capacity5,700 l and 1 sterile tank with 7,500 l with automatic valves and 2 control systems
Inspektor Linatronic along with contour detecion module: • Type: Krones Linatronic K735 • Manufacture year: 2012 • Capacity: max. 60 000 bottles/h. • Direction of operation: from left to right Possible detection: • Residual liquid (infrared) • Double check of residual sodium (high frequency) • Inspection of neck damage • Side wall control modules - 4 modules • Rejection of damaged bottles • Separate rejection of dirty bottles • Bottle contour detection • Bottle color detection • Separate rejection of bottle with wrong contour or color The Inspection unit contains the conveyor which separates bottles before the entry to the Inspector and the Ejector table after. Total lenght of the Unit: 11300 mm
Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...
Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m
maximum number of results exceeded
please refine your search
