teach in used for sale

Position Sensor, Inductive Sensor IFM EFECTOR100 IB0004 IB-2020-ABOA 20 - 250 V AC / DC New ! Dimensions: 150 x 125 x 35 mm

Three-phase electric motor with inverter LENZE MDEMAXX112-22 4,000 0 /4.8 / kW 1435 / 1735 / 2545 rpm 400 / 480 / 400 V 3AC, 50 / 60 / 87 HZ IP 54 Design: B35 Shaft diameter: Ø 28 mm Wavelength: 60 mm Groove width: 8 mm Flange diameter: Ø 180 / 250 mm Bolt circle diameter: Ø 215 mm Hole diameter: Ø 15 mm Motor foot: 175 x 230 mm Hole spacing ( parallel to shaft ): 140 mm Hole spacing ( transverse to shaft ): 190 mm Hole diameter: Ø 11,11,000 5 mm inverter: Type E82MV402_4B001 Input: 400 / 500 V 3AC, 50 / 60 Hz Output: 0 - 400 / 500 V, 3AC 0 - 650 Hz, 4.0 kW used, tested ! Dimensions: 460 x 260 x 390 mm

Intermediate plate REXROTH HSZ 10 A216-30/M01 ( HSZ10A216-30/M01 ) 527519/3 DBDS 10K18/100 New ! Dimensions 240 x 70 x 80 mm

ABUS Indoor Crane / Overhead Crane – 5,000 kg Lifting Capacity For sale is a used ABUS indoor crane with electric wire rope hoist type GM2050 L6. The crane is ideal for workshop, production, steel construction or warehouse operation. Crane is in very good condition, tests were carried out regularly. Technical data: Manufacturer: ABUS Kransysteme Type: GM2050 L6 Load capacity: 5,000 kg Wingspan: 9,800 mm Hook travel: 6,000 mm Control: Push-button button / pendant button Year of Make: 1991 The crane comes from ongoing operation and was used until the end. Robust industrial design with proven ABUS technology. Dismantling by buyers Viewing possible by arrangement. Loading can be supported. Sale exclusively to tradespeople. The sale is used, excluding any guarantee, warranty or return.

ABUS Indoor Crane / Overhead Crane – 3,200 kg lifting capacity For sale is a used ABUS indoor crane with a lifting capacity of 3,200 kg. The crane comes from ongoing, productive operation and was used until the end. Robust industrial design with proven technology from ABUS Kransysteme . The crane is ideal for workshop, production, steel construction or warehouse operation. The condition is used, but functional. Regular maintenance was carried out. Technical data: Manufacturer: ABUS Kransysteme Year of Make: 1995 Load capacity: 3,200 kg Wingspan: 8,035 mm Type: (not specified / on request) Control: Pendant button / push button button button (if applicable) Other: The crane comes from ongoing operation and was used until the end. Disassembly by the buyer. Viewing possible by arrangement. Loading can be supported. Sale exclusively to tradespeople. The  ...

PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Intermediate plate, directional control valve, hydraulic valve REXROTH HSZ 06 A401-31/FGM1-A06G24K4M00 ( HSZ06A401-31/FGM1-A06G24K4M00 ) R901033738 315 bar used, tested ! Dimensions: 265 x 50 x 80 mm

Intermediate plate, directional control valve, hydraulic valve REXROTH HSZ 06 A327-3X/M01 ( HSZ06A327-3X/M01 ) R900523147 315 bar used ! Dimensions: 110 x 45 x 40 mm

Intermediate flange for hydraulic pumps size 1 ORSTA TGL37069 hole spacing hydraulic pump: 72 x 60 mm bolt circle electric motor: Ø 165 mm New ! Dimensions: 170 x 170 x 90 mm

Intermediate flange for hydraulic pumps PAGUS PL 300/7/0 ( PL300/7/0 ) Bolt circle hydraulic pump: Ø 145 mm Bolt circle electric motor: Ø 265 mm used ! Dimensions: 300 x 300 x 200 mm

Fine Gauge Indoor Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm 16 mm missing Dimensions: 250 x 180 x 70 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 75 - 100 mm M 0.8 - M 6 incomplete! with protective box Dimensions: 310 x 140 x 40 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 125 x 40 mm

Threaded Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 110 x 35 mm

Fine Gauge Internal Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm Dimensions: 250 x 180 x 70 mm

Iron gauge, trade passometer CARL ZEISS 75 - 100 mm TGL 20250 in wooden box Dimensions: 275 x 170 x 40 mm

Indoor gauge, fine indicator Indoor gauge Feinmesszeugfabrik Suhl Into 300 - 500 mm 320 - 330 is missing with protective box Dimensions: 730 x 210 x 120 mm

Threaded Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 110 x 35 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMSSZEUGFABRIK SUHL Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

Threaded Measuring Screw, Threaded Bracket Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 2.5 incomplete with protective box Dimensions: 255 x 110 x 35 mm

Threaded Measuring Screw, Threaded Bracket Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 50 - 75 mm M 0.7 - M 5.5 incomplete with protective box Dimensions: 300 x 130 x 35 mm

Iron gauge, Passameter CARL ZEISS 50 - 75 mm in wooden box Dimensions: 250 x 145 x 40 mm

Iron gauge, trade passometer CARL ZEISS 100 - 125 mm adjuster for tolerance area is missing ! in wooden box Dimensions: 300 x 175 x 40 mm

Iron-on gauge, trade passometer CARL ZEISS 125 - 150 mm in wooden box Dimensions: 330 x 195 x 40 mm

Fine iron indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of measuring screw: 0.01 mm Reading dial gauge: 1 μm TGL 20250 in wooden box in wooden box used ! Dimensions: 240 x 115 x 40 mm

Fine Gauge Throat Gauge MAHR 15 - 60 mm in wooden box Dimensions: 140 x 160 x 50 mm

Infrared Thermometer, IR Thermometer, Pyrometer EAW MESSGERÄTEWERK MAGDEBURG Ursatherm Pyrovar HPR F100 Temperature range: -20 - 200°C with case Dimensions: 490 x 390 x 150 mm

Threaded Measuring Screw, Threaded Bracket Measuring Screw Feinmesszeugfabrik Suhl Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 115 x 35 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw Feinmesszeugfabrik Suhl Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

Thread Measuring Screw, Threaded Bracket Measuring Screw Feinmesszeugfabrik Suhl Range: 25 - 50 mm M 1 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 20 - 75 mm M 0.5 - M 6 204194B with protective box Dimensions: 200 x 155 x 55 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 75 - 200 mm M 0.4 - M 7.5 204194B with protective box Dimensions: 310 x 150 x 55 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 75 - 200 mm M 0.4 - M 7.5 with protective box Dimensions: 310 x 150 x 55 mm

Internal measuring screw, internal measuring device FEINMESSZEUGFABRIK SUHL 60 - 300 mm with protective box Dimensions: 200 x 145 x 35 mm

Internal measuring screw, internal measuring device FEINMESSZEUGFABRIK SUHL 60 - 540 mm with protective box Dimensions: 305 x 125 x 35 mm

Iron gauge, trade passometer FEINMESSZEUGFABRIK SUHL 125 - 150 mm TGL 20250 in wooden box Dimensions: 360 x 215 x 45 mm

Iron-on precision indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of screw: 0.01 mm Reading dial gauge: 2 μm TGL 20250 in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Iron-on precision indicator, passameter with plate FEINMESSZEUGFABRIK SUHL 45 - 70 mm in wooden box Dimensions: 280 x 165 x 45 mm

Iron-on precision indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of screw: 0.01 mm Reading dial gauge: 2 μm TGL 20250 in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Internal measuring instrument, fine indicator Internal measuring instrument FEINMESSZEUGFABRIK SUHL 10 - 20 mm in wooden box Dimensions: 305 x 110 x 60 mm

Infrared Thermometer, IR Thermometer, Pyrometer EAW MESSGERÄTEWERK MAGDEBURG Ursatherm Pyrovar HPN Temperature range: -200 - 200°C with case Dimensions: 490 x 390 x 150 mm

Indoor measuring instrument, fine indicator Indoor measuring instrument Feinmesszeugfabrik Suhl INTO 35 - 60 mm in wooden box Dimensions: 530 x 120 x 70 mm

Indoor measuring instrument, fine indicator Indoor measuring instrument FEINMESSZEUGFABRIK SUHL INTO 35 - 60 mm in wooden box Dimensions: 450 x 120 x 60 mm

Fine indicator throat gauge MAHR Marameter F 25 - 60 mm Dial gauge holder: Ø 8mm used, tested ! Dimensions: 180 x 80 x 40 mm

Threaded Screw, Threaded Bracket Gauge, Threaded Screw Gauge with Fine Knife CARL ZEISS Range: 100 - 150 mm M 0.6 - M 10 Measuring Tip M 0.4 - 0.6 is missing ! with protective box used, tested ! Dimensions: 445 x 180 x 50 mm

Fine indicator throat gauge MAHR 50 - 160 mm dial gauge holder: Ø 8mm in wooden box used, tested ! Dimensions: 285 x 185 x 50 mm

Incremental module FESTO TAB-2N-PK-3-01-B series: N401 10536 2 - 8 bar New ! Dimensions: 90 x 80 x 40 mm

Indicator set TELEMECANIQUE PXVF141 080342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Indicator set PARKER PXV-F141 80342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

SIME INDUSTRIE brake type 650 RM N° 27231 50 V Dimensions: 200 x 200 x 300 mm