127,374 used machines on RESALE, but how to find them? Machine Search
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
Insulated multilayer pipe Ø26 - - Auction-ID: A7-46421-55
Very nice and young complete Ammonia Bitzer screw pump system. The pump system exists out of one Bitzer OSNA8571K screw compressor, a 110 kW WEG E-motor, oil separator, Low pressure separator, economizer, air-cooled oil cooler, air-cooled condenser and a control panel with Siemens PLC. The Bitzer compressor is driven by a 110 kW Vacon inverter. Capacity is 91kW at 60Hz and -35/+40°C (with 50Hz capacity is 75kW). All documentation is available. Also visit our website: used-refrigeration
Insulated multilayer pipe Ø26 - - Auction-ID: A7-46421-54
Insulated multilayer pipe Ø16 - - Auction-ID: A7-46421-50
Insulated multilayer pipe Ø26 - - Auction-ID: A7-46421-48
Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2 ...
ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Control: S4C+M2000 Number of axes: 6 Max. load capacity: 175 kg max. working range: 2800 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.
3 needles; with applied elastic Auction-ID: A7-45992-190
KUKA KR 3 robot Control: KRC3 Number of axes: 6 Max. load capacity: 3 kg Max. intervention: 680 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams.
ABB Robotics IRB 140 S4C+M2000 Robot Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 6 kg Max. working range: 810 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams
Including pressure vessel, oil cans, axes and bucket Auction-ID: A1-41682-66
Robot Yaskawa Motoman YR-SV3-J30 Control: XRC Year of Make: 2001 Load capacity: 3 kg Reach: 677 mm Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Insulated multilayer pipe Ø16 - - Auction-ID: A7-46421-52
Insulated multilayer pipe Ø16 - - Auction-ID: A7-46421-51
I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
Key data: 2500 kN, 618 g/PS, 60 mm
Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes
SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.
Insulated multilayer pipe Ø26 - - Auction-ID: A7-46421-56
Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg
HPL and Honeycomb board; FSC Auction-ID: A1-46266-336
According to photos, weight estimated Auction-ID: A1-45666-31
630x2115 mm; white pre-treated Auction-ID: A1-46266-345
Pneumatic Injection Unit Kremlin A25 P air: 6 bar P prod. 6 bar Dimensions:45 x 160 x 45 mm
S/s weighing scale with Yaohua indicator, dimensions scale: 1100 mm x 510 mm x 70 mm, model indicator: XK3190-A12+ SS, maximum weight: 300 kg, minimum weight: 2 kg, d=e= 100 gram, dimensions indicator: 260 mm x 160 mm x 140 mm.
Steel 40 feet high cube insulated cooling container, weight: 4580 Kg, dimensions: 12170 mm x 2460 mm x 2880 mm.
Bizerba optical inspection machine, type: Trieur Optique, serial number: 02SPL025, year of construction: 2017, 230 V, 50 Hz, dimensions: 1200 mm x 1200 mm x 2400 mm.
Velati double shaft paddle mixer, inside dimensions: 1550 mm x 1040 mm x 750 mm, total dimensions: 2700 mm x 1300 mm x 1900 mm.
The screw compressor is in good and working condition. Auction-ID: A3-43525-34012
Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm
Condition: used and untested. 230 V. Auction-ID: A1-45996-273
Condition: used and unchecked. Auction-ID: A1-45996-237
Twist drill bits with internal cooling RWR SBV 11,000 65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11.65 mm shank Ø 12 mm spiral length 70 mm total length 118 mm New !' Dimensions: 125 x 17 x 17 mm
maximum number of results exceeded
please refine your search
50 € 
