127,375 used machines on RESALE, but how to find them? Machine Search
For sale is a high-quality industrial picking crane from the manufacturer VETTEN Krane & Service GmbH, specially developed for the efficient storage and picking of long goods such as steel pipes, steel bars and other elongated goods. This particular model was made in 2016 and is in excellent condition. It is ideally suited for the fully automated handling of long materials in industrial environments such as warehouses, production facilities and logistics centres. Technical details: - Manufacturer: VETTEN Krane & Service GmbH - Year of construction: 2016 - Type designation: ZLK 5tx23550 S - Load capacity: 10 tons - Net weight: 36 tons - Factory number: 16-215302 Features and Benefits: - Efficient material handling: significant time savings and efficient use of storage capacity - Automated processes: fully automatic handling of long goods, reduction of personnel costs, increa ...
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive ...
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit
For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Connection: 230V Auction-ID: A1-46037-29
Equipped with Joskin distributor, Auction-ID: A1-40136-193
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Caterpillar C4.4 - Unused - 110 kW - JKT
Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...
Injection Unit Screw Diameter: Ø 70 Injection Volume: 1,239 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 4,500 kN (450 t) Clamping System: Two-platen design (Jupiter II series) Platen Size (H × V): approx. 1,140 × 1,040 mm Mould Opening Stroke: 950 mm Max. Daylight Opening: approx. 1,650 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 100 / 70 kN Drive & Control Drive Type: Servo-hydraulic system Main Motor Power: 62 kW Full Load Current: 104 A Short Circuit Rating: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Haitian KEBA touchscreen control Equipment / Features Clamping Concept: Two-platen system for space efficiency and ...
B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm
Used machine in good condition. Available for immediate delivery.
Decoiler D = 1000 Auction-ID: A7-46309-16
Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footp ...
Unaudited Auction-ID: A7-46327-249
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and com ...
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
The GED Intercept line is fully integrated and includes the production of Intercept spacer bars directly from coil and the assembly of insulating glass units. Production capacity: 1,200–2,880 complete IGUs per 8-hour shift. Typically 150 IGUs/hour (for standard sizes, e.g., 24\" x 36\"). Line type: Horizontal, automated production of Intercept spacer bars + glass washing + assembly + sealing + pressing. Main components of a typical line: 1. Intercept spacer bar machine (Intercept Ultra, 2.5, or I-3) - with automatic coil feed, U-shape forming, notching, gas-powered punching, and corner crimping. 2. Glass washer - stainless steel, low profile, air knife drying. 3. Sealant application station — precise dispensing of butyl/hot-melt and desiccant. 4. ATLAS assembly system — for dual/triple IGUs, with sequential assembly capability. 5. IG Oven & Roll Press — infrared with intelli ...
Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
Complete registration papers Electric Auction-ID: A1-41964-62
FAG, SKF and INA - Batch of industrial bearings 248KG Auction-ID: A1-46070-352
Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg
SKF - 331714A - Large industrial bearing 1x Auction-ID: A1-46070-339
Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm
with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg
maximum number of results exceeded
please refine your search
30 € 
