teach in used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 21 mm -Dimensions: see photo technical drawing -Dimensions total: 78/63/H56 mm -Total weight: 1.3 kg

Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg

Clamping device extension, workpiece clamping device, extension, guide stop -Aluminum profile: with double T-slot -Groove width: 35/50 mm Dimensions: see photos / technical drawing -Number: 1 profile available Dimensions: 175/80/H135 mm -Weight: 2.4 kg

Immediately available used injection pump

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Evacuators/ Infeeders/ Conveyor systems Manufacturer: Budde Year of construction: 2011 Condition: Good (Used) Colour: Blue -galvanized Total length: approx. 2500 mm Short side (ejector) : approx. 780 mm Total width incl. motor: approx. 1300 mm Straps: 18 pieces - approx. 40 mm wide Conveying width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading y ...

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: ifm, Input module -Type: AL2401 -Number: 27 modules available -Price: per piece -Dimensions: 165/60/H30 mm -Weight: 0.4 kg/pc.

KEG Bottling Line Manufacturer Tonsen / China Semiautomatic Type St 1F Max. 40 KEG/h at 30L Depending on the operator and the degree of dirt Year of construction 2023 Further enquiries and price on request

TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module -Manufacturer: ifm, IO-Link input module -Type: AL1102 -Number: 7 modules available -Price: per piece -Dimensions: 210/60/H35 mm -Weight: 0.4 kg/pc.

Used staniless steel juice and other liquids pressure filling line into glass bottle 0,25-1L with twist off closure made by Polish company Robak Konin. Capacity 2000 bottles/h. The line includes: Bottle washer with 10 rinsing heads suitable for: Bottle diameter 45 mm to 100 mm range. Bottle height 105-260 mm. Standard bottle head diameter 28mm. Bottle head regulated 18-43mm. Bottle transporter, Bottle filler with 10 filling heads. Automatic closer for bottles. More info available upon request. Line includes automation control cabinet. Technical documentation available in Polish. MIssing labeler. Also available for this line is bottle cooler for a separate price. The line is in good condition

Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) angle: 45°, 90° Construction year: 1995 nominal voltage: 380-480 V Nominal / outside width in mm: 600 Roll width in mm: 500 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,68 scope of delivery: without supports and side guides For ...

Transnorm angled inlet outlet rejector infeed conveyor 45°-700-685 RA2060 Year of manufacture: 2014 discharge angle: 45° Nominal/external width (NB): 700 mm Useful width (NUB): 600 mm ( 685 mm ) Conveyor speed: 0,97 m/s Roller diameter: 50 mm, steel rolls with rubber cover Drive: Interroll drum roller Electrical data: 24V, 2A center distance: 75 mm Height: 80 mm Length: shortest length: 900 mm, length to tip: 1700 mm Optionally available: Supports Side guide one-sided and both-sided Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) angle: 45° nominal voltage: 24V Conveying length in mm: 1300 Nominal / outside width in mm: 700 Roll width in mm: 685 Roll division in mm: 75 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,97 scope of delivery: withou ...

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module -Manufacturer: ifm, IO-Link input module -Type: AL2400 -Number: 16 modules available -Price: per piece -Dimensions: 130/60/H30 mm -Weight: 0.3 kg/pc.

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

Transnorm Rising falling Incline with arch belt conveyor GF 1115+800-700-600 RA2228 Technical data: Conveyor length (NL): 1915 mm ( 1115 mm incline + 800 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1915 ( 1115 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eur ...

Inductive sensor, electronic sensor, proximity switch, infrared sensor, IR sensor, web edge sensor, photoelectric sensor -Manufacturer: Fife, infrared sensor -Type: SE-42R M280746 -Number: 11 sensors available -Price: per piece -Dimensions: 140/100/H25 mm -Weight: 0.1 kg/pc.

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera, 16x speed, 2-megapixel camera (B/W) -Type: CA-H200MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg

Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera, 16x speed, 5-megapixel camera (B/W) -Type: CA-H500MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg

Ring sensor, hose sensor, light barrier, ring light barrier, frame light barrier, inductive ring sensor -Manufacturer: ifm, Inductive ring sensor -Type: I7R201 -Inner diameter: 10.1 mm -Voltage: 10...35 V DC -Quantity: 1 sensor available -Dimensions: 74/35/H20 mm -Weight: 0.1 kg

Neumärker Induction Plate 3.5 kw tested-Buttons Signs of use

General - Bertolaso Filling and Sealing Combine, YOC 2006 - Running direction left/right - Capacity range up to 8,000 bph 63-digit clamp overhead rinser - Ozone sterilization medium - Fully automatic sterilization before the start of filling - Centrally adjustable inlet stars, easy inlet screw replacement 40-Digit Vacuum Filler - with new gearbox - Centrally adjustable inlet screws - Easy inlet screw replacement - Fully automatic damping - Central height adjustment 6-digit natural cork seamer - with separate cork supply 6-head screw capper for BVS 30/60 and MCA 28 - Central cap supply - with central control station - Automatic faulty bottle ejection and collection station - With fully automatic star adjustment and easy screw change The filling and capping combine is immediately available and can be visited at any time after consultation. Used machines ...

M. No.: 27830/85 Paper size range(cm) : max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Station: TS36/4J Feeder: FT36J Folding unit: KB36

Transnorm inclined inlet Rejector Rejector Roller spiral 45°/90°-900-800 RA2236 Year of construction: 2008 Conveying angle (WZ + WR): 45° + 45° Mean length (ML): 1150 mm Nominal/outer width (NB): 900 mm Effective width (NUB): 800 mm Conveyor speed: please contact us Roller diameter: 50 mm steel + conical plastic-coated rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Center distance: 75 mm Overall height: 120 mm, 450 with motor Overdrive with chain Optionally available: Supports Lateral guide on one and both sides Frequency converter for infinitely variable speed control Ball roller table for infeed and outfeed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Construction year: 2008 angle: 45°, 90° nominal voltage: 380-480 V Nominal / outside width in mm: 900 Roll width in mm: 800 Roll division i ...

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: ifm, Input module -Type: AL1402 -Number: 1 module available -Dimensions: 205/60/H35 mm -Weight: 0.5 kg/pc.

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/95/H70 mm -Total weight: 4.4 kg

WMW SI 4/1 Internal Grinding Machine YOM 52/1999 VEB Berliner Werkzeugmaschinenfabrik Grinding diameter 5-250 mm Max. grinding length 250 mm Max workpiece dia 370/450 mm (with/without safety cover) Spindle head speed 35-1400/min Work piece spindle speed 70-775 mm Max. table travel 560 mm Table speed stepless 0,5-6 m/min. Total power 16,5 kW Total Dimensions 3300x1440x2000 mm Machine 2200x1400x2000 mm Weight 4.8t.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 21 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H60 mm Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 52/48/H36 mm -Total weight: 0.4 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module -Type: 6ES7 131-6BF01-0BA0 -Number: 6 modules available -Price: per piece -Dimensions: 70/15/H55 mm -Weight: 0.1 kg/pc.

Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera 16x high-speed line scan camera with 4096 pixels -Type: CA-HLO4MX -Dimensions: 110/50/H70 mm -Weight: 0.4 kg

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Number: 8 modules available -Price: per piece -Dimensions: 140/20/H75 mm -Weight: 0.1 kg/pc.

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Robot KUKA KR30L15/2 - Control KRC2 This used robot (built in 1998) from KUKA is perfect for metalworking and locksmithing. With a load capacity of 15 kg and a reach of approx. 3100 mm, it offers a high degree of flexibility and precision. The KRC2 controller allows for easy programming and operation. The robot is in very good condition and comes with a warranty. Ideal for companies that want to automate their production processes. The stated net price is exclusive of the statutory 19% VAT.

The KUKA KR30L15/2 robot is offered with the KRC1 controller. The robot (built in 1998) is ideal for automated metalworking and locksmithing. The KUKA brand stands for high quality and reliability. With a payload of 15 kg and a reach of approx. 3100 mm, the robot can be used flexibly and can automate a wide range of industrial applications. The KRC1 controller makes it easy to program and operate the robot. Get the high-quality KUKA robot for your business now. The stated net amount is exclusive of the statutory 19% VAT.

Ball valve internal thread -Internal thread: 2 -Full bore, solid sphere -Quantity: 195 pieces in stock -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

KUKA KR 60L30/2 Robot Robot Mechanics Only Year of construction 2003 Load capacity 30kg Reach approx.:2429mm 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. Free loaded/ex-works. The indicated retail price is exclusive of the statutory VAT of 19%.

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums -Connection: 220 volts -Stainless steel container (not a wet vacuum cleaner) -Power: 1400 watts -Weight: 25 kg

Small-character inkjet printer -Machine: is untested and sold as a source of spare parts -Dimensions: 500/600/H1750 mm -Weight: 40 kg

Inductive sensor -Manufacturer: Pepperl Fuchs -Product type: NJ40 U1 E2 -Packaging unit: 5 pieces -Number: 5 packs available -Price: per sensor

ABB Robotics Robot IRB 2400/16 S4C M98 Control: S4C M98 Number of axles: 6 Max. load capacity: 16 kg Max. working area: 1550 mm Year of construction: 2000 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Digital input device, Interbus -IBS Rl 24 Di 16/8-LK-2MBD -Weight: 1.5 kg

Inductive sensor -10-65 VDC 200 mA -Sn: 100 mm -Quantity: 5 pieces available Price: per piece -Weight: 1 kg

Inductive sensor -10-65 VDC 200 mA -Sn: 40 mm -B5MNH Quantity: 10 pieces available Price: per piece -Weight: 0.5 kg

Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...