We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,225 used machines on RESALE, but how to find them? Machine Search
used
Fischerscope XDLM 237 XRAY / X-ray fluorescence spectrometer XRAY spectrometer for non-destructive determination of layer thicknesses for all common metal coatings as well as other material analyses using X-ray fluorescence. Contact us if you have any questions about the previous application. The device is fully functional and will be reset to factory settings before delivery. All maintenance was carried out by the manufacturer's service team according to the manufacturer's specifications. Any repairs and acceptances were also commissioned from the manufacturer. It is a full protection device with the appropriate type approval. Periodic inspections in accordance with the requirements of the Radiation Protection Ordinance have always been carried out by approved experts.
used
Mobile pump set built on an open skid. The pump is powered by a reliable hand-started Hatz 1D81Z diesel engine., Max yield : 51 m3/h, Max head : 30 MWK, , If you are interested in this pump, please do not hesitate to contact us., We have 4 pcs. in stock., , Throughput capacity: 51 m3/h, Motor brand: Hatz, Max. head: 30 MWK, Max dirt passag: 3400 rpm, Weight: 200 kg, , = More information =, , Year of manufacture: 2010, Applicable material: Water, Empty weight: 200 kg, Connector size: 3 Bauer, Cargo space capacity: 850 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physi ...
used
VTT Pipe racks ideal for storing all types of pipes and tubes., The frame is fully galvanized., If you have any question dont hesitate to ask them., , = More information =, , Year of manufacture: 2021, Colour: Grey, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.
used
Year of manufacture: 2022, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.
used
For sale are used LENZE frequency inverters. The devices are in very good condition and fully functional. Technical data can be found in the description as well as the nameplate (see photos). We will be happy to answer any further questions you may have about the goods. Yours sincerely, Your M&E Trading Team Information about the seller: We, M&E Trading GmbH & Co. KG, are a long-standing dealer in the field of used food technology, specializing in the dairy industry. We now have satisfied customers in over 27 countries on 6 continents around the world. We are a 5⭐️ company on GOOGLE and have the Trusted Seal on the trading platforms Trade Machines, Machinio and Resale. We would be happy to prove to you that we are a reliable business partner.
used
Dear Sir or Madam, we offer a refurbished ELDAN M 6. The machine is currently undergoing an overhaul in our workshop. In a few days the original pictures will follow. Producer: ELDAN Type: M 6 Electric motor/Drive electric motor : 11 Kw / 400 V Diameter range/Diametre cable: 25 - 160 mm Cutting speed 34 metres per minute Weight/Full weight approx. 1500 kg Heavy peeling machine for iron and lead alloyed cables. Just ask. We will be happy to advise you. There are other cable cutting machines in stock. Your Diebels recycling machines team.
used
Telemequanice frequency converter, ATV18D16N4, 11kW - top condition. For sale is a used Telemecanique frequency converter. The device is in very good condition and fully functional. The technical data can be found on the nameplate (see photos). We will be happy to answer any further questions you may have about the goods. Yours sincerely, Your M&E Trading Team Information about the seller: We, M&E Trading GmbH & Co. KG, are a long-standing dealer in the field of used food technology, specializing in the dairy industry. We now have satisfied customers in over 27 countries on 6 continents around the world. We are a 5⭐️ company on GOOGLE and have the Trusted Seal on the trading platforms TradeMachines, Machinio and Resale. We would be happy to prove to you that we are a reliable business partner.
used
LIQUIDATION of automatic debarking machine from the manufacturer MAJA, mod. VBA500A. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Characteristics: Tape width 450mm, blade width 450mm. Measures input tape: 1000 mm long x 450 mm wide. Output belt: 870 mm long x 450 mm wide. External measurements: 920 mm wide x 1190 mm high closed lid – 1790mm open lid, 960 mm high entrance tape x 2130 mm long. Electrical power: 1.1Kw, 2.6A, 380V, 50HZ, Equipment to plug and work. Its condition is excellent re-release. Equipment reviewed and guaranteed. OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you need any information, more photos, or videos and do any type of test in our exhibition pavilion you have at your disposal by calling the commercial attention phone. If you are really interested in the team, call us at our sho ...
used
It sells machine revealing pieces of meat of the brand MAJA, model EVM 3002. Built in stainless steel in its entirety. Used equipment completely revised, with guarantee and in prefect condition. Characteristics: cutting width 440 mm, external measurements of the machine 830 mm wide x 620 mm deep x 1000 mm high, working height 960mm. Average speed 30m/min, air pressure 6bar/10bar, weight 180kg, voltage 400v 50Hz, three-phase, 2.2 A, 0.75 Kw. Meat shaper , bark peeler, meat peeler, fish peeler, cephalopod peeler. Practically new re-release team. Reviewed and guaranteed. NEGOTIABLE PRICE, transport costs on behalf of the buyer. If you need any information, more photos, videos and do any kind of test in our exhibition pavilion. Contact by phone, one of our experts will gladly assist you in a personalized way and make you the best offer. If you are really interested in the team, call us at ou ...
used
LIQUIDATION of complete line of chapata forming with the option of 2 sizes. Our "Multipurpose Line" allows us to continuously and automatically produce a wide range of products such as chapata. Manufacturer: CANOL. The line includes the following models of CANOL machines: MCI 690, PRE 700 C/O, MUL 700, TR/D, GH/MR/65. Thanks to the 'Zero Stress' technology applied to our pasta extruder, it is possible to treat all types of sourdoughs with a high moisture content gently and without stress, safeguarding the gluten structure, keeping the structure of the dough stable and avoiding the loss of yeast gas from it. Thanks to the use of this methodology, the final quality of the products obtained, both frozen and cooked, is considerably superior to traditional systems and lines. Our line "Multipurpose Line" is characterized by the ease and speed in the passage of production from one product to ...
used
We sell slicer, fully automatic vertical sausage cutter, of the German brand GRAEF, model VA 300. Made of stainless steel and anodized aluminum. Ideal machine for automatic slicing depositing stacked in the form of staggered. It has different ways to set working speed. Graduation of the thickness of the manual slice. Equipment completely rebuilt and overhauled by GRAEF technical service. Stainless steel cutting blade of 300 mm diameter. Product tray measurements: 420 mm long x 220 mm. Machine dimensions: 900 mm x 670 mm x 560 mm high. Cutting thickness: 0 to 10 mm infinitely variable Cutting length: 210mm Cutting height: 175 mm Cleaning and maintenance applications are developed with ease. Power 230V, 50Hz, 0.5Kw, 2.4 A . IP33 Weight: 75kg. Slicer, semi-automatic slicer, meat cutters, industrial meat cutters, industrial slicer, meat machinery, sausage machinery, food slicer. I ...
used
LIQUIDATION of indirect fire electric kettle for capacity of 100 liters. Manufactured by METOS, mod. VIKING BASIC 100E. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Electrical power: three-phase, 400V, 3P N, 50Hz, 25 A, 16 KW, . Equipped with inlet tap for hot and cold water. External measurements: 1200 mm wide x 800 mm deep x 1210 mm high). 304L outdoor stainless steel construction, frame and cooking vessel in stainless steel, cylindrical in shape with rounded bottom. Electronic thermostat. Its condition is excellent re-release. Equipment reviewed and guaranteed. OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you need any information, more photos, or videos and do any type of test in our exhibition pavilion you have at your disposal by calling the commercial attention phone. If you are really interested in the te ...
used
Traysealer Ilpra model Food Pack Tank with vacuum pump Bush. As characteristics of the machine we highlight the following: automatic film collector, macula detector for printed film, new BUSCH vacuum pump of 63 m3, input feed belt for trays in automatic, Exit of the machine by dragging by chains to roller outlet, prepared to pack with protective atmosphere, with vacuum and only heat-sealed. Automatic traysealer, works at cycles of 2 trays and production capacity of 12 cycles per minute with heat sealing with vacuum and gas. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material, using heat and pressure. It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine ...
used
LIQUIDATION of automatic vacuum packaging machine. SUPERVAC brand, model GK 169 B. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. This automatic vacuum system, which includes an outlet belt assembly, is a flexible solution for fast and automatic vacuum packaging. Characteristics: Dimensions of the vacuum chamber internally: 900 mm x 750 mm. Bell height 170 mm. Useful length of sealing bars: 650mm Total machine dimensions: 1550 mm high, length 2100 mm, width 1200 mm, 1090 mm working height. Electrical power: 6.8kw, 400V 3 PHASES, 50Hz, 17 A. Pneumatic power: 6-7 bar. BUSCH vacuum pump of 250 m3/h. Equipment fully revised, reconditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you ne ...
used
LIQUIDATION of Double hood vacuum machine from the German manufacturer of high quality KRAMER GREBE, model QUICK AUTOMATIC. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and aluminum. The machine is ready to plug in and work with. Busch empty pump: 63m3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 1000 mm long x 800 mm wide x 950 mm maximum height down lid, 850 mm working height. Camera dimensions: 430mm x 470 mm x 160 mm high. Welding bar measurements: 430 mm x 2. Weight: 175 Kg. Voltage: 380 V, 3 Ph, 50 Hz, Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buye ...
used
Hot-dip galvanized stacking frame for the installation of a water pump or aggregate., , If you are interested, please do not hesitate to contact us for a quote., , = More information =, , Year of manufacture: 2018, Applicable material: Water, Empty weight: 75 kg, Technical condition: good, Visual appearance: good, Damages: none, Please contact John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.; Accessories: NL: Direct ...
new
Boiler capacity: 270l; Volume flow rate: 680l/min; Motor power: 5.5 kW; Refrigerant dryer: Yes; DESCRIPTION The two-stage compression 2-cylinder high-performance unit achieves a very low speed, resulting in particularly smooth and low-vibration running This ensures a longer service life due to less wear and Large fan wheel and a cooling air deflector on the cylinder for optimal compressor cooling Aftercoolers with cooling fins and intercooler to the aftercooler ensure a low tank inlet temperature and thus less moisture in the compressed air quality electric motor with high tightening torque electric motor equipped with motor protection switch With high-quality CONDOR pressure switch Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain tap Ten years warrant ...
used
BBA ( Cornell )5RB-F16 NEW and UNUSED driven by a DEUTZ BF4M2012C(2007) with 5700 workinghours, Machine is fully serviced and checked by manufacturer.( BBA), Electrical part is completely renewed, Pump is new and unused, Is offered with 8 DN200 suction hose with strainer., Motor is built in a soundproof housing., Vacuum pump is a BBA MP50, , Machine is ready for immediate use and in stock!, , Throughput capacity: 600 m3/h, Max dirt passage: 35 mm, Motor brand: DEUTZ BF4M2012C, Max. head: 110 MWK, Max dirt passag: 2300 rpm, , = More information =, , Year of manufacture: 2022, Applicable material: Water, Empty weight: 4.750 kg, Connector size: 8 inch, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , ...
used
BBA MP 50 Vacuum pump this MP series pump with air treatment capacities of 50 m3/h. He is, designed with a clear focus on reliability, efficiency and durability., Pump specifications:, Type.MP50 Diaphragm pump, max. air capacity.100 m3, /h (59 CFM), max. vacuum..8.5 m (29 inHg), Diaphragm/valves...Rubber, , Throughput capacity: 100 m3/h, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Cargo space capacity: 1.667 l, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappoint ...
used
This Qualicaps inspection machine combines computer image processing technique and CCD line sensor camera to capsule rectification-transfer mechanism. The appearance of the capsule is inspected by direct image capture with the camera, controlling its orientation and rotating the capsule during intermittent transfer. The machine controls filled hard capsules directly on the line by meticulous examination of pharmaceutical or nutraceutical products. It allows accurate inspection of capsule appearance performed by color line sensor cameras with the possible immediate expulsion from the production line through an appropriate rejection system, when the machine detect itself anomalies on the product. Technical data: Dimensions mm 2000 x 700 x 2450 Total weight Kg 1000 Voltage Volt 400 Frequency Hz 50 Production characteristics: Capacity 50,000 capsules/hour Compatible capsules: ...
used
Gallus R200 B02 10-color – Age: 2007 Manufacturer: Gallus Ferd. Rüesch AG Configuration: 10 x Letterpress Units 2x unwinder, 2 DW left, 3 DW left, 3 DW right, 2 DW left, K250 Year of construction: 2007 (extension 10 colours) Rotastance 360° servo drive Rotastanze 360° servo-drive (middle 6's block) Rotor dryer servo-drive IS UV system M25-8x1-R-HP-SLC, UCS 6 Chill-roller technology 2 Web Edge Controls Softal corona system VS Tecknek web cleaning Sensotec register control system (LCD touch screen monitor) K250 winder automatic Tech. Specifications: Colour: Gallus NCS blue 7 red blanket printing units left 3 units red blanket printing unit right 1 screen printing unit left 1 screen printing unit right 1 hot stamping unit incl. temperature control unit All positions prepared for ...
used
Böhl Junior /S 450 - TVP fully automatic wrapping machine Böhl Junior /S 450 - TVP fully automatic wrapping machine for all types of profiles and long goods Product Dimensions Width 175 – 320 mm Height up to 45 mm Length 1,000 mm to infinity Maximum cross-sectional diagonal 420 mm Packaging materials PE stretch film thickness approx. 17 – 50 my (recommended 23 my) Roll diameter 250 mm Roll width 80 mm Core Diameter 76 mm Specifications Machine dimensions: Width 1,700 mm / Depth 1,500 mm / Height 2,100 mm Weight approx. 1,500 kg Max. speed 20 m/min (frequency controlled) Control voltage 24 V DC Connection voltage 400 V – 50 Hz, 3 phases Power consumption approx. 3 kW Noise level 79 db Manual cutting and clamping device for the packaging material Automatic Product Recognition Automatic motorized product transport Manual height adjustment of the win ...
used
This Damen DOP 1515 multifunctional, submersible dredging pump is in very good condition., As you can see, it is part of a complete set for worry-free underwater dredging., The heart of this versatile dredging tool is, a wear-resistant, compactly built dredger, pump fitted with maintenance-friendly seals., All wear parts are easy to replace., The set consists of, Dop 1515 Hydraulic driven dredging pump incl. hydraulic hoses., 38 pcs. floats, 2 pcs. Suction nozzles, Type A Sand production head, standard jet water nozzles, Type B Flat bottom head with standard jet water ring around the head, , For more information feel free to contact us., , Throughput capacity: 500 m3/h, Max dirt passage: 75 mm, Max dirt passag: 1200 rpm, Weight: 900 kg, , = More information =, , General information, Applicable material: Water, , Measures and weights, Empty weight: 900 kg, Dimensions (LxW): 101 x 83 cm, , ...
new
T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0. ...
used
Key data: 900 , 252 , 48
Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault ...
used
Impulse SIP 150-6 dirty water pump. This Impulse dirty water pump is equipped with a reliable Hatz 2M41 diesel engine with an electric start/stop system., Built in a super sound attenuated housing. The pump is equipped with an analogue control unit., This analog control unit is solid built and fully integrated into the pump set., , max. yield : 388 m3/h, max. head : 32 MWK, max. Dirt passage : 90 mm, , Throughput capacity: 388 m3/h, Max dirt passage: 90 mm, Motor brand: Hatz, Max. head: 32 MWK, Max dirt passag: 1800 rpm, Weight: 1555 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.700 kg, Cargo space capacity: 6.470 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may ha ...
used
teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option ) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option ) Command: Siemens Weight: 2270 kg
new
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWPre-setting Package CTX 450 ecolinePre-setting ...
new
DH Robotics AG-95 Gripper Weight: 1000 g Payload: 3000 g With a stroke of 95mm, the DH Robotics AG-95 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-95 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced yet affordable gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-95 is an adaptive two-finger gripping solution, offering advanced, adaptive gripping at an affordable price. With a recommended payload of 3kg and a stroke of 95mm, the DH Robotics AG-95 offers considerable versatility in terms of ob ...
new
DH Robotics AG-145 Weight: 1300 g Payload: 2000 g With a stroke of 140mm, the DH Robotics AG-145 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-145 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced yet affordable gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-145 is an adaptive two-finger gripping solution, offering advanced, adaptive gripping at an affordable price. With a recommended payload of 2kg and a stroke of 140mm, the DH Robotics AG-145 offers considerable versatility in terms of obj ...
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...
used
5955 WITTMANN W621 ROBOT, LINEAR ROBOT Wittmann W621 - 2149 Manufacturer: Wittmann Model: W621 - 2149 Year of construction: 2006 Condition: very good (used) Weight: 255 kg Load capacity: 10 kg Dimensions: 2400 x 1000 x 2500 mm Axis: X: -350 J: -1000 Z : -1500 B: left 180° - right 180° Control: Wittmann, Teach Box
used
turning diameter: 290 mm turning length: 3000 mm swing dia.: 650 mm swing diameter over face slide: 350 mm spindle bore diameter: 71 mm number of controlled axis: 2 control: Monforts EuroTurn turning speed range: 2- 1800 U/min rapid speed: 10/5 m/min tail stock: MK 6 number of tapers in turret head: Multifix C bed width: 550 mm power requirement: 21/15 kW max. torque on the spindle: 3320 Nm dimensions: m weight of the machine ca.: 6,5 t Used Teach in lathe in good condition Zubehör: - 3 jaw chuck - Multifix C with Capto quick change tool - coolant system - steady - chip conveyor - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm) - electric break main motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over transverse guideway370 mmSwing diameter over guide ways700 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Transverse stroke276 mmLongitudinal stroke755 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...
used
Key data: 600 mm
Band Saw Wood Saw Wood Band Saw CENTAURO Type: Compact 600 NL Roll diameter approx. 600 mm incl. several different saw blades Panhans roller guide at the bottom and top. The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please in ...
new
Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...
new
Model Ultima Hybrid version UBB 170 t/3200 mm New machine trade fair stock machine SPECIAL PRICE YEAR OF YEAR 2022 Linear CNC measurement for depth Y1-Y2 ESA 860, 2D graphical CNC control, 15" touch CNC-Y1Y2-X-R-Z1-Z2 backgauge on ball screws CNC-controlled hydraulic crowning 1 set of upper tools PS,135-85-R=.8, 3x 835 + 1x 805 divided 1 set of Rolleri M460-R sub-tools CNC-controlled bending aid CE Lasersafe Control ESA 860W, PC graphical control with automatic bending sequence calculation, collision warning 19 inch touch screen incl. remote assistance via Teamviewer and workstation software Backgauge 6-axis CNC backgauge Y1Y2-X-R-Z1-Z2 Drive SERVO DRIVE hybrid up to 70% energy savings EXTRA high speed 200 mm/s from and up Nvs32 CNC-controlled bending aid Lower tool holder Small narrow table, width 60mm x height 110mm Front support arms 2 heavy sup ...
used
Teaching or test bench for hydraulic components with all accessories for sale.
used
These Elastec barriers can be used for floating waste and debris, sludge and sediment, oil spills or surface water pollution problems. These barriers are designed with an emphasis on improving water quality by reducing and controlling pollutants., , = More information =, , Year of manufacture: 2020, Technical condition: very good, Visual appearance: very good, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.; Accessories: NL: Direct inzetbaar, op voorraad!, PUMPED UP AN ...
used
These Elastec barriers can be used for floating waste and debris, sludge and sediment, oil spills or surface water pollution problems. These barriers are designed with an emphasis on improving water quality by reducing and controlling pollutants., , = More information =, , Year of manufacture: 2020, Model year: 2020, Colour: Yellow, Technical condition: good, Visual appearance: good, VAT/margin: VAT qualifying, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in adva ...
used
I sell here several machines, equipment, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts. Therefore, be sure to check out my other auctions Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw ROBLAND Type: Z320 Alu format slide 320 cm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 285cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence up to 130cm 3 different speeds adjustable (4000/ 5000/ 6000rpm) Motor power main engine 5.5 KW Motor power scoring 0.55 KW Prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked ...
used
It is a used, reconditioned Seewer Rondo Kombi sheeter SKO 67 for sale. The machine is fully functional, new belts are assembled before delivery. The combined dough sheeter is suitable for all types of dough, turing and rolling out for long-working bread of all types of bread dough, rye, wheat and mixed bread doughs with a straight end, for long-rolling plait, pretzel sticks as well as knitting Parisian bread and caviar sticks. Ribs can also be made. Sandwich dough pieces are rolled out and hammered in. Specifications: - with pull-out tape - has manual, infinitely variable roller adjustment - Synchronous gear prevents jamming, shrinking or tearing of the dough sheet - Length for rolling out (working position) 2500mm - Connection: 400V, 16A-CEE plug Price on request.
used
unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its Power Robot” title. Year: 2014 Type: Foundry Plus Reach in mm-2500 mm Payload-400 kg Cabinet: NOT Included (Works with IRC5) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find them for you Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.
used
This Sykes waterpump can be used on urban worksites ore with flood water control, , Sykes pumps are universally recognised as one of the most reliable and energy-efficient pumps on the market., Max Flow : 198 m3/H, Head : 53 MWK, Solids Handling max : 45 mm, , • Galvanised steel, dual point lifting frame., • Manual diesel fuel fill (lockable)., • Pump and engine control panel with emergency stop as standard., • Pump operating range sign for optimum pump life and reliability., • Galvanised steel sled, complete with tyne pockets and tie down points , for transportation., , Throughput capacity: 198 m3/h, Motor brand: Perkins, Max. head: 53 MWK, , = More information =, , Year of manufacture: 2011, Applicable material: Water, Cargo space capacity: 3.300 l, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, , = Dealer information ...
used
turning diameter: 500 mm turning length: 1500 mm control: Siemens 802 C swing diameter over bed slide: 280 mm spindle bore diameter: 82 mm number of controlled axis: 2 turning speed range: 20- 3000 U/min rapid speed: 5 m/min number of tapers in turret head: 1 Multifix C tail stock: Ja MK 5 power requirement: 7,5 kW weight of the machine ca.: 3,0 t dimensions: 3,3 x 1,7 x 1,7 m Used Teach In CNC- lathe - coolant system - Multifix C station - 3 jaw chuck - some tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Robot Fanuc Arc Mate 100i Control: R-J3 Number of axes: 6 Year of construction: 1999 Max. payload: 6 kg Max. working range: approx. 1368 mm Scope of delivery : Robot, controller, cables, teach panel, instruction manual, wiring diagrams
used
The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2015 (Multiple options available) Reach in mm-3200 mm Payload-130 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find for you Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.
used
The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2009 Reach in mm-2800 mm Payload-185 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.
used
Robot cobot JAKA ZU7 as good as new year 2021 radius 819mm, 7 kg payload YOC 2021 Controls: App for PC Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 819 mm Scope of delivery : robot, controller, cable, teach panel, software 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited.