tea packaging machine used for sale

Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

Diosna SPV 240 AF/T - Spiralkneter mit 2 kessel auf frage moglich mehr kessel - Bottichwandabstreifer mit Temperaturfühler - sterung mit program speichren - sehr leiser Betrieb - Maschine wie neu

Used spiral kneader with extendable tank car BOKU, type: SK 160 -bakery condition - 2 pieces of kneader and 4 pcs. boiler available - for 160 kg dough or 100 kg flour - Kneading arms interchangeable - Condition good, ready for immediate use The company DIOSNA has taken over the area of BOKU. BOKU dough kneaders are still made. THE service and spare parts offer DIOSNA. Sightseeing and test run are possible by arrangement.

AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...

AVIA FNE 40NC milling machine was built in 2001 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for precision machining of workpieces with a maximum weight of 400 kg. The machining process is performed in three axes by means of a reliable spindle with stepless speed adjustment. The spindle, mounted on a swivel workhead, moves in the Z axis on precision vertical guides. All this is complemented by the easy-to-use HEIDENHAIN NC control system, in which even the most advanced programmes can be created in just a few steps. The AVIA FNE toolroom milling machine weighs 1900 kg. Technical data of the AVIA FNE 40NC metal milling machine - NC controller: HEIDENHAIN TNC 310 - feed in the X/Y/Z axis: 620/420/400 mm - rapid traverse in the X/Y/Z axis: 6000/4000/4000 mm/min - feed rate adjustment: stepless - maximum workpiece weight: 400 kg - horizontal work table  ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.17800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor  ...

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

GeneralUniversal turning-/milling center; Control: CELOS X with Siemens SINUMERIK ONE Working areaSwing diameter over guide ways580 mmTurning diameter550 mmMax. Turning Length1600 mmBar diameter max.104 mmWork spindle (left)Spindle bore118 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)32 kWDrive power (40% DC)36 kWSpeed range- 4000 rpmBench speed510 rpmTorque (100% DC)600 NmMax. torque (40% DC)720 NmTurning-milling spindleSpindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWSpindle taperHSK-T 63 Torque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment800 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools30 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets130 mmCounter spindle ISM 102, A2-8Counter spindle as integrated spindle motor, ISM 102, A2-8 - Drive power 32/36 kW (S1-100%ED / S3-40%ED)  ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Used spiral kneader KEMPER, type: ST 30 -Completely overhauled- - for 30 kg flour or 48 kg dough - technical condition: very good - completely overhauled - 6 months warranty Confession and test run are possible by arrangement.

Series No. 50871101, Flatepile Feeder, 4 Pockets, Delivery

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

SANDRETTO MEGA T 1200

Control Other Brother C00 Speed [rpm] 10000 Travel X/Y/Z [mm] 700/400/300 Tool pick-up BBT 30 Main spindle: Technology Direct Drive Speed 10,000 rpm Power (max.) 26.2 kW Torque (max.) 92 Nm Tool holder BBT 30 Work table: Clamping area 800 x 400 mm Table load (max.) 250 kg General: Tool Magazine 21 Stations Rapid traverse in X/Y/Z 50/50/56 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management Minimum Quantity Lubrication (IKZ), Fabr. Lubrix V5 4th axle Lehmann EA-510 with counter bearing Workpiece Clamping Hydraulic, 80-210 bar Support Control Pneumatic Automation Preparation I Automatic Work Area Door (Electric) Automation Preparation II Robot Interface Oil Mist Extraction Mechanical Separator, Fabr. Sara UC1 SD Stand riser 150 mm Setup operation Electronic handwheel Further equipment transformer

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.

Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Overhauled, new Hotmelt slot nozzles - coating and laminating system. Up- and downwinding systems on request.

3000 x 1500mm 4000w With Bytrans Extended loading/Unloading

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

for bill of exchange order unit

4 adjustable spindles, pedal operation, drilling range 3-14mm, ...

6 adjustable spindles, pedal operation, drilling range 3-14mm, ...

3000 x 1500mm 4000w Bytrans Extended

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet

Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!

Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg

Tape washing machine, paddle washing machine for fruit and vegetables used Manufacturer: BINDER Maschinenbau GmbH Type SFB 80 Built: 1998 Power max 3000 kg/h VA stainless steel with stud strip width approx. 1000 mm Tub approx. 1500 x 1100 mm with 2 washing paddles Dimensions: approx. 3000 x 1300 x 1800mm A use for washing plastic is also conceivable. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.