127,272 used machines on RESALE, but how to find them? Machine Search
Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
Technical data Information on the technical equipment of the machine Length: 10509 mm Height: 2806 mm Total weight: 9500 kg Max. Printing speed: 11,000Dr/h Printing material width: min. 130 mm, max. 265 mm Print width with print mark: max. 254 mm Format length: max. 254 mm (10") Unwinding roll diameter: max. 1040 mm Unwinding spindle: 3" (max. 300 kg) Rewinder Spindle: 3" Grid Winding Spindle: 3" Reel diameter: max. 300 mm Grating trigger Roller diameter: max. 800 mm Components of the machine - Unwinder -Web trimming / edge trimming - Web edge control -Ionization device - Touch screen control panel - 2x Letterpress Printing Unit - 1x painting unit (Flexo) -Loop box - -Rotary die cutter with the following magnetic cylinders (Z72, Z74, Z76, Z78, Z80, Z84, Z88, Z92, Z96, Z100, Z104, Z108, Z112, Z116, Z120, Z124) - Wire mesh winding unit - Outlet part - C ...
Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6
New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...
capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2007 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2006 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads Bjgcgttd8s incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Fiber Laser Machine HLF Power: 4kW Sheet metal size: 3000 x 1500mm Alternating table Sheet metal layer detection Siemens touchscreen control with LAN/USB Siemens Drives Precitec Auto Focus Procutter Cutting Head THX Guided Tours IPG resonator with 4kW is included: Guarantee CAD CAM Software Commissioning Delivery within Dtl Training offered
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions
Diosna spiral mixer Model: SP80 D Serial: 9611-2118 80kg stainless bowl, stainless dough hook, two speeds, two timers, 3Ph
2 heads, manually adjustable approx. 50 - 320 mm, foot switch, approx. 300 mm working depth
- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...
Spiral kneader Gostol with 2 extendable stainless steel boilers We have 2 kneading machine and 4 boilers in the warehouse. -Stainless steel spiral -Stainless steel boiler -2 speeds -2 timers automatic
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300 ...
• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...
Wire EDM Machine Manufacturer: Mitsubishi Electric Type: MV1200S NewGen Year of Make: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel: X/Y/Z: 400 x 300 x 220 mm Travel paths U V: 120 x 120 mm Workpiece dimensions max.: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS-Optical Drive System Tubular Direct Drives in XY Axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole search function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS-Long Life System 10 kg wire station Wire alignment block Wire Chopper Compressor Cooler
- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...
Key data: 320 mm, 500 mm, 3800 1/min
OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...
• Workpiece thickness: 8 - 55 mm • Workpiece width min.: approx. 30 mm • Workpiece length min.: approx. 130 mm • Edge thickness: 0.4 - 1.0 mm • Roller separation max.: 0.8x60 mm • Inner radius: 25 mm • Heating time: max. 2 min • Temperatures: approx. 260 - 400°C • Diameter foil plate: 600 mm • Table depth min.: 465 mm • Table depth max.: 955 mm (extended) • Table length: 1400 mm • with edge cutter • Working height: approx. 230 mm • Weight: approx. 87 kg • Changeable location, as equipped with 2 wheels! Electrical connector: • 230V/ 50/60Hz Total connection: • 3.3 kW Heating: • 3.0 kW Dimensions (WxDxH): approx. 1700 x 1600 x 1100 mm Transport dimensions (HxWxD): approx. 1100 x 1400 x 750 mm (without pallet!) The machine has been completely reworked, cleaned and thoroughly tested in our company. (Changes a ...
PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...
Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)
Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...
• max workpiece thickness: 55 mm • min. workpiece width: 80 mm • max profile depth: 80 mm • max edge thickness: 3 mm • Table size: 800 x 380 mm • Foot pedal operation • Adjustment via mechanical counters • Weight approx. 120 kg (Changes and errors in the technical data and prices reserved!)
Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...
3000 x 1500mm Truflow 5000w Auto nozzle changer Auto pallet changer
Rego SM 4 RMT stop overhauled Rego Model: SM 4 RMT overhauled Stirring machine with automatic timer The machine when it comes to striking! 2 working functions: 1 x stirring / 1 x beating Working shaft/stirrer shaft reworked Powerful and robust technology Boiler lighting, timer Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Other accessories Ring Gas Burner Boiler New Brushes New Whisk New Wendering / Kesselring Maintenance contract Service Package Delivery Instruction & Commissioning
Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;
Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...
Used spiral kneader KEMPER, type: SPL 75 -Refurbished - 6 months warranty - for 120 kg of dough or 75 kg flour - 2 time clocks - Dust cover - Spiral and boiler made of stainless steel - Condition: technically and visually very good - ready for immediate use - Delivery free house insideh. Germany Sightseeing and test run are possible upon request.
Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...
Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
Nederman 30S Industrial Vacuum Cleaner – Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nederman 30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial use. Specifications: • Model: 30S • Year of construction: 2015 • Voltage: 400 V / 3 phases • Power: 3.0 KW, 400 V, 50 Hz, 2800 rpm, 3 phases, 6.8 A, Iso F, S1, IP55 • Container volume: approx. 50 litres • Negative pressure -230 mbar, overpressure 245 mbar • Weight: approx. 90 kg • Condition: used, fully functional Scope of delivery: • Nederman 30S vacuum cleaner •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) • Shipping by forwarding agent possible by arrangement • Locati ...
used
Diosna SP 240 A DL with 3 bowls -Machine after overhaul - New bearings, new V-belts, new switches, new buttons, - 2 speed - 2 o'clock for 30 minutes - 3 boilers - For 240 kg dough
Nilfisk T30S Industrial Vacuum Cleaner - Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nilfisk T30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial applications. Specifications: • Model: T30S • Year of manufacture: 2011 • Voltage: 400 V / 3 phases • Power: 3.0 kW / 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 • Container volume: approx. 100 litres • Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h • Filter type: cartridge filter • Weight: approx. 103 kg • Condition: used, fully functional Scope of delivery: • Vacuum cleaner Nilfisk T30S •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) ...
infeed station, pressing station, jogging station, banding station for up to 2 up production, transport to paternoster delivery table format sizes 1 up production 720 x 235 mm, 2up production 335 x 235 mm Bundle Delivery with Pressing Station
Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton
Double Z kneader / Sigma kneader Topos Used Double Z Kneader Topos 250 L – Sigma Kneader – - Kettle Kneader – Dough Kneader - Industrial Kneading Machine – Stainless Steel – Overhauled and Function Tested Robust stainless steel construction, powerful drive, ready for immediate use. The Topos double Z-mixer with a usable volume of 250 litres is a robust and powerful industrial machine for highly viscous mixing and kneading processes. Thanks to its solid kneading arms, it ensures even mixing of viscous media and doughs. Industrial materials such as doughs, sealants, paints, adhesives, raw ceramics or chemical mixes. The machine was designed for continuous industrial use and impresses with its stable design, durable design and easy-to-clean stainless steel design. - Make Topos, built around 1965 - Completely overhauled in 2018. Function-tested. - Easy ope ...
Specifications: Manufacturer: MB Maschinenbau / EDM Drilling Machine Type: ECO DRILL F DK703F Control: SINO SDS 32 – 3 EC Year of Make: 2007 Travel X, Y: X 250 mm, Y 200 mm Travel Z (servo automatic): 360 mm Travel W (head movement manual): 250 mm Pump: Piston High Pressure Pump Clamping table L/W: 300 x 400 mm Working tank: 440 x 540 mm Workbench Max. distance table to electrode guide: 300 mm Electrode diameter: 0.3 – 3.0 mm Max. workpiece weight: 250 kg Generator Connected load: 3.5 kVA Connection: AC 3x 230 V, 50.60 Hz Max. Output Power: 25 amp Dimensions and weight Dimensions L/W/H: 1,300 x 900 x 1,900 mm Weight: 850 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Additional flushing, DC servo motor
Chain stemmer GF with drilling unit for wall mounting L x W x H: 1200 x 800 x 2300 mm Built in 1972 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
maximum number of results exceeded
please refine your search
