tea packaging machine used for sale

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

2 Hot melt glue machine Meler, glue melter, 5 liter hot melt glue - used - : Price per piece from location: only 2.950.-€ (net)! Manufacturer: Meler Type: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Serial number: e.g.: 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWED BLOCK VOLUME DIMENSIONS OF 192 mm DIMENSIONS W 182 mm DIMENSIONS C 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h () PUMPING CAPACITY 29.3 kg/h pump 7 cc () 66.0 kg/h Pump 19 cc () NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 A 200°C (104 A 392°F) Optional: 40 A 230°C (104 A 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L X A X H): 587 x 341 x 481 587 x 341 x 628 (lid open) WEIGHT: 37.5 kg (without filling) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4kW, Condition: good Avail ...

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

General Manufacturer: Spinner Type: TTC300 65SMMCY Control: Siemens 840D SL ShopTurn Year of Make: 2015 Travel X1 / X2 / Z / Y: 180 / 110 / 450 / +40-40 mm Rapid traverse X1 / X2 / Z / Y: 15 / 15 / 15 / 24 m/min Turning Spindle 1 Speed: 4,000 rpm Chuck size: 250 mm Spindle passage: 52 mm Spindle power S1 / S6: 21 / 27 kW Torque S1 / S6: 201 / 258 Nm Turning spindle 2 Speed: 7,000 rpm Chuck size: 130 mm Spindle power S1 / S3: 6 / 8.5 kW Torque S1 / S3: 49 / 68 Nm Revolver Number of tools: 12 + 12 (BMT45) Rotating Tools: 12+12 (BMT45) Speed: 6,000 rpm Power S1 / S3: 2.3 / 3.5 kW Torque S1 / S3: 7 / 11 Nm Dimensions and weight Dimensions: 2,700 mm x 1,900 mm x 2,165 mm Weight: 5,100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: IKZ 50 bar with belt filter system Parts Conveyor Belt w ...

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Used Nail Box (Loose Nails) for Pallet Making Machine; Tilt function for loose nails for separation into the nailing machine (feeding) to the nail guns; Pallet production; functional, functional. not cleaned, not refurbished. Dimensions: 580x810mm Overall width: 760mm Total height: 710 mm Shipping by freight forwarder possible Nail Box IMH Machinery AB nailing box for IMH Machinery AB pallet IMH Machinery AB Year of manufacture 2004 Nail box for IMH pallet nailing machines. Sold in used condition. Dismantled ready for use. Dimensions of the box: 580mm x 810 mm Overall width: 760 mm Total height (not extended): 710 mm Shipping possible with forwarding agent. Asking price: 3250 EUR Nail box for IMH Machinery AB (Pallet production machine) used conditions, ready to work dimensions and condition: see pictures. dispatch / freight possible.

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz  ...

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

gebr. As good as new precision band saw HEMA UH 800 Year 2018 Motor power 4 kW Stepless drive (frequency-controlled) Cutting speed: 400 – 2,000 m/min. (infinitely adjustable) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 480 mm Saw blade length: 5,600 mm HEMA top + bottom roller guide Precision table swivel device with handwheel and rack Miter Gate Valve Digital blade clamping display Hour meter Engine brake EMERGENCY STOP Limit switch secured doors Extraction connection: D 100 + 120 mm Dimensions: approx. 149 x 90 x 246 cm (W x D x H) Weight: approx. 800 kg Current new price: approx. 30,000 EUR net! Few operating hours Therefore, absolutely mint condition!

Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Kemper Langwirker-I-L

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

GLUE APPLICATOR Manufactured by FISHER+RÜCKLE Model: Gluemate

Key data: 200 mm, 400 , 360

Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...

Key data: 200 mm, 300 , 200

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Mettler Toledo PCE model XMV-TE for marking, verifying and security labelling (Tamper Evident) of folding cartons, etc. for serialisation and aggregation (track & trace), the product codes and variable data (serial number, batch, expiry date, data matrix code) printed on the folding carton are checked for accuracy and quality by a camera, output up to 300 cartons per minute, folding carton width 75-200 mm, folding carton height 20-100 mm, transfer unit for folding cartons with lower belt and height-adjustable top stabilising belt with a width of 35 mm, folding carton outfeed belt with a width of 200 mm, Wolke m600 inkjet printer with 2 print heads for applying data matrix codes, etc. with PCE camera print control with a resolution of 1550 x 1200 pixel, reject ejection with collection container, 2 label dispensers for security labelling (Tamper Evident), label format min. 20 x 20 mm, max. ...

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728

Bezner Siebmaschine | Roller classifier type TWD Refurbished (Workshop Overhauled) with new bearings (roller bearings), new ball plates and renewed screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Factions: 3 Mesh size of sieve: - 1st screen deck: punched perforated sheet metal screen, D = 45 mm or by arrangement - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or by arrangement Drive power: 5.5 kW, 3 x 400 V, 50 Hz Screen box height: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the spouts according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Saw ...

Bezner Siebmaschine | Flat screening machine type BSM-50/1750W reinforced version Screening machine especially for the use of mixed construction site waste (commercial waste, mixed construction waste) used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction waste (commercial waste, mixed construction waste)) - Screen area: approx. 6.0 m² (approx. 2.25 m² for D = 8 mm // approx. 2.25 m² for D = 25 mm // approx. 1.5 m² for D = 60 mm) - Fractions: 4 Crswvwqsw I E H Rsy Eog - Screen decks: 1 piece - Drawer side: up - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine colour: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Constr ...

The machine is in good technical condition, after prior agreement possible to test. Control system – Siemens Including filtration. Bed inclination Bed material Number of guides 45 cast iron 3 (4 with Y-axis option) WORKING SPACE (V1- V4) Swing diameter over bed inch 19.69 Swing diameter over cross slide inch 11.42 Largest turning diameter inch 7.87 200 ч Distance between centers inch 30.71 Largest turning length inch 19.69 15.82 20 Max. weight of flying unsupported part of workpiece lb 35 Max. distance of center of gravity of flying unsupported part of workpiece inch 165 from spindle face Max. workpiece weight clamped between centers lb 100 X-axis travel length inches 7.48 Y-axis travel length (OР.) inches 3.14 (+/- 1.57) Z1-axis travel length inches Z3-axis travel length inches Spindle axis height above floor inches 20.67 21.65 39.26 (38.77+1.18) MAIN SPINDLE Spindle face (flat face ...

Working Length: 3300 mm

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Properties: Used labeling machine with labeling system Very stable design Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Technical data: Manufacturer: SRD Type: Stano/- Alone-Line Device: Valentin SPE 106/12 Semi-automatic labeling system for image and sound carrier See user manual, schematic and pneumatic diagram Changes and errors in the technical data as well as intermediate sale reservations Roller track The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between production and mach ...

- Year of construction: 1996 - Semi-automatic - Zalkin head with 4 wheels: 2x thread rolls - 2x safety ring - For closures Ø 28 mm

Working Length: 3100 or 4100

Bosch Car T5 horizontal cartoning machine for vials/bottles, blisters, etc. inmtermittend motion, infeed for blisters, etc. via Transborm System curved conveyor and infeed belt (180 mm x 700 mm (belt width x length)) feeding into an automatic product inserter to put the products into the bucket infeed of the machine, infeed for vials/bottles via Bosch URK 1200 rotary turntable (diameter 1200 mm, suitable for vials/bottles with a diameter of 18-85 mm and a height of 20 to 175 mm) with feeding table (490 x 580 mm (WxL)) and bottle insertion device into the bucket infeed of the machine, carton size range min. 20 x 16 x 60 mm (AxBxH), max. 95 x 70 x 200 mm (AxBxH), reverse tuck closure of the carton flaps, GUK FA21/4 leaflet folder from stack (4 folding pockets, format min. 60 x 80 mm, max. 210 x 300 mm, smallest fold 15 mm), single-sided emboss coder (3 lines), Laetus Argus 6012 bar code re ...

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

DECKEL S11 Sharpener TECHNICAL FEATURES: Wheel diameter: 125 [mm] Workpiece Spindle Nose: ISO 40 Paper Filtration: No Supply voltage: 400 [V] Installed power: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 Universal Divider with Quick Indexing – Part Number: 255X0X x10 divider rings for fast indexing x1 tailstock with transverse adjustment – Ref.: 2621000 x1 tailstockwith vertical adjustment – Item No.: 2624000 x1 complete swivel bracket – Article No.: 2626000 x1 Grinding Unit (Concave or Convex) – Item No.: 2628000 x1 1 Universal Depth Gauge – Part Number: 2570000 x1 1 helical sharpening device – Article No.: 2580000 x1 draft grinding slide – Item no.: 2673000 x1 universal vise – Ref.: 2635000 x1 optoelectronic measuring unit with microscope – Part Number: 2650012 x2 RSF-Elektronik digital axis visualizatio ...

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

RBP BAUER DEBLISTERING MACHINE, MODEL D3600 Built in 2003, this machine is equipped with speed control, magazine level monitoring, counter and product-specific tool for ensuring GMP-compliant recovery of pharmaceuticals that can be returned to the production cycle. Can be plugged to a central vacuum system. With manuals, maintenance file, electrical diagram, pneumatic diagram. CE compliant. Output: up to 60 blisters/min Format range: 150 mm x 120 mm Tooling changeover: 3 min (approx) DIMENSIONS Size: 550 x 1100 x 1530 mm Weight: 100 kg (approx) ENERGY CONSUMPTION Supply voltage: 110/230 V AC / 50-60 Hz Control voltage: 24 V DC

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...