tea packaging machine used for sale

Bosch ampoule compact system, fully automatic line for washing, sterilizing, filling and closing ampoules of 1 ml., 2 ml., 3 ml., 5 & 10 ml. consisting of Bosch RRU 3040 washing machine, possible container diameter 8-32 mm, Bosch HQS 2030 hot air sterilization tunnel, Bosch ALK 3040 filling and sealing machine incl. laminar flow hood, possible container diameter 9-26 mm, container height 35-75 mm, magazine, including format parts for DIN ampoules of 1 + 2 ml. (Ø10, 75 mm), 3 ml. (Ø12.75 mm), 5 ml. Ø14.75 and 10 ml. (Ø17.75 mm), output up to 12,000 ampoules per hour.

Becker BZ-2 Atomic - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of construction 2020 In the system, a trimming is first carried out at the front of the cardboard in order to to cut off possible damage to the van. After trimming, a Edge trimming on both sides of at least 30 mm each. Furthermore, if necessary, a corner is cut off from the cardboard. This is depending on the type of Fefco different. Finally, the cardboard is creased at the folding points and removed from the machine. The waste that is generated is transported by means of a waste belt underneath outside the machine. At the machine outlet there is a Conveyor belt, which disposes of the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily removed from the of the plant. The blanks and the ...

Stock number: F733, In stock: Yes, Amount in stock: 1 pc., Item: Packaging plant, Motor: 3500 Watt - 220 Volt, Product size: Max W 420 x L 550 mm., Manufacturer: Dibi-Pack, Model: 4255 Conf.term

Packaging line for briquettes/pellets air pressure 6 bar voltage 400V power 20kW weight 800kg

Horizontal tubular bag machine, make Jaguar Record in use for bars, This horizontal form, fill and seal machine can pack one or more products in a film bag., The machine runs at a maximum cycle rate of approx. 36 bags/min., The following formats (bag widths) are already available:, 35 mm width (single bar) & 145 mm width (several bars in one film)., The length of the bag can be adjusted variably., The heat-sealing film is sealed using heating jaws., The MHD print can be set manually and moved across the entire width of the film., Lt. current owner in working condition.

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

Semi-automatic strapping machine PRO-System Packaging Technology TP-501, year of construction 2014

Semi-automatic strapping machine PRO-System Packaging Technology TP-501, year of construction 2014

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2026). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. -Weight: 42 kg

Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. -Weight: 32 kg

In stock on pallet Auction-ID: A7-45419-20

Canon PowerShot A2100 IS 12.1 megapixel 6x opt. zoom with orig. black Good condition Auction-ID: A7-45427-253

COMIL automatic packaging line• Year : 1991 • Complete packaging line with motorized conveyors, shrink oven and loading area• Robust steel structure with three-phase power supply• Adaptable to different product formats• Synchronized conveyors for continuous throughput• Integrated control cabinet• Estimated weight: approx. 3500 kg Auction-ID: A1-45443-52

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

For sale ConTeyor industrial plastic pallet box elements – ECOPACK 1208Lx model, suitable for storage and heavy logistics (industry, recycling, agro, automotive, warehouses). General characteristics (box mounted): Brand: ConTeyor Model: ECOPACK 1208Lx External dimensions: 1200 × 800 × 1050 mm Weight of an empty box: approx. 24 kg Maximum static load: 1050 kg Load capacity on bottom: 350 kg Material: polypropylene (PP) – recyclable Stackable – industrial logistics compatible Detail of available stock: 46 pallet bases 65 contours 450 dividers 66 lids Total weight of the set: approx. 1,800 kg ➡️ Possibility of setting up several complete boxes depending on configuration or sale of the elements separately / in lots. Status: Used equipment in good working condition, traces of normal use related to professional use. Applications: Logistics, industry, heavy storage ...

New in original packaging Unused The McGee Energy HD is a complete audiophile solution. It consists of two high-quality active monitors in an elegant high-gloss finish and a separate control unit (preamplifier) that centrally manages all connections. Special highlights: • Sound: Powerful, detailed sound thanks to perfectly tuned internal amplifiers (Active Speakers). • Versatility: The compact black control unit offers digital and analogue inputs for TV, PC, CD player or smartphone. • Design: Timeless high-gloss design in white/black – an eye-catcher in any living room or home office. Technical data & connections: • Inputs (Digital): 1x Optical (Toslink), 1x Coaxial – ideal for modern TVs or streamers. • Inputs (analog): 1x line-in (RCA/RCA) for turntable (with pre-amp) or mobile phone. • Outputs: Dedicated 5-pin XLR connection to the speakers (cable included) ...

Erweka VDT/S Packaging Leak Tester Blister Density Tester Untested from Laboratory Closure Auction-ID: A7-45427-9

In stock on pallet Auction-ID: A1-45495-416

Trolley 160 / 250 G with packaging material, 1 trolley with content food packaging PP approx. 1550 transparent cups 160 / 250 G with approx. 2000 lids 160 DG Auction-ID: A7-45675-42

Trolleys with packaging material, 1 trolley with contents Mug Thermo with various lids approx. 750 pieces Auction-ID: A7-45675-49

Trolley with packaging material, 2 cardboard of butcher's wax paper, 2 cardboard of tear-off flat bags HDPE, 3 cardboard of cake box = 220x220x100 cm and 320x320x115 cm, 5 x grilled chicken bags approx. 500 x carrier bags 22x10x28 cm, 500 DKT carrier bags etc. Auction-ID: A7-45675-50

Trolley with packaging material IGEFA, approx. 1000 x baker's pleated bag 16x6x36 cm white 35g, approx. 1500 x baker's pleated bag 10x5x22 cm, approx. 500 x baker's pleated bag, 6 cartons a = 12.5 kg parchment blanks 1/2 B = 50x75 cm 45 g, 8 cardboard flat bags premium ECO blocked - transparent 25x35x3 cm each 2500 pieces = total 20000 pieces Auction-ID: A7-45675-45

Trolley with packaging material, paper plates No. 4 A = 1750 pieces, No. 8 B = 1000 pieces, No. 4 C = 1600 pieces, No. 8 A = 1250 pieces, semicircular / deep = 400 pieces Auction-ID: A7-45675-52

Trolley Dressing Box 621 with packaging material, 1 trolley with food packaging contents approx. 1000 PP cups 125 g, approx. 450 PP cups 250 g, approx. 1000 PP cups 500 g plus lid + other boxes Auction-ID: A7-45675-43

Trolley with packaging material, 13 cardboard vacuum bags 400x590 mm each 250 pieces, 3 cardboard bread bags 180x100x550 mm, 3000 LDPE bags 150x100x450 unperforated, 7000 LDPE bags 180x100x500 unperforated, 3000 LDPE bags 180x100x600 unperforated Auction-ID: A7-45677-60

Lattice box with 10800 packaging trays Faerchplast C 2171-2A, Rectangular Black 420 ml Material CPET Length 171.00, Width 126.60, Height 34.20, Maxim. Tenmp. -40 to 220 °C suitable for oven and microwave Auction-ID: A7-45677-69

61000 Paper gusseted bags Erzberger Verpackungssysteme, 54500 x 20x7x42, 6500 x 16x6x28, kraft paper brown 35g/m² threaded, Manufactured: 6/2021 Auction-ID: A7-45677-68

Bulk of food packaging Premium LINE, disposable knives, forks, spoon cups, cups, salad bowls, bowls, sausage plates, aluminium packaging, bowls with lids, soup bowls, paper plates, coffee cups, coffee spoons, chicken bags and delicatessen bags Auction-ID: A7-45677-107

Work table with contents + packaging material, contents several boxes + crates with rectangular cups + lids of various sizes as well as round cups with lids + closure clips for bags Auction-ID: A7-45677-21

Set of 4 Cruella d'enfer naughty dolls and accessories new in original packaging Auction-ID: A1-45282-145

Set of 8 naughty cruella and the evil queen dolls and their accessories new in original packaging Auction-ID: A1-45282-139

Pallet, consisting of 400 58 x 41 x 40 packaging cartons Auction-ID: A1-45282-216

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Quantum Qsm 175 Double Grinder Grinding Machine Double Grinding Machine Auction-ID: A7-45427-243

PADE model 1000/N trimming-milling-drilling machine: – automatic sliding worktop – blade for header D=400mm, 3 hp motor – milling machine with shaft D=30mm, 5 hp motor – 5-spindle drilling machine, 360° adjustable, 3 HP motor Machine not CE compliant, for export

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m